This is such an underrated video! You explained everything so clearly and told the consequences of adding too much lube, what all the terms mean etc.Very high quality!
Thank You TCKyewbs! This will help me set up my RS3 M 2020. I currently have been cleaning it once a week, and I wish it was always as good as it was when recently cleaned. I also have to hear the spring noise when turning quietly. With this video I will no longer have those problems. Thanks again TCKyewbs! You have a new subscriber!
Fantastic video! Fairly new to speed cubing and setting up my own cubes. Your video helped me a lot! My cubes have become much better thanks to you! Very comprehensive and easy to follow. Definitely one of the best videos for setting up a cube I've found, if not the best! GJ! Quick question: what do you do with the remaining black Vortex lube in the blue dispenser tip after you finish lubing the core? Should I be cleaning (or washing) it out or can I leave the black Vortex lube in the dispenser tip until the next time I lube the core of a cube? Thanks again for the content. It was extremely helpful!
I like putting a slow lubricant on the internals(like the torpedoes, corner stalks, etc.) ONLY. And not on the actual pieces. So now its controllable yet quick and also smooth. Not lubricating the pieces also gives it a sandy-ish feel
Really nice video! Your content help me really very Much because I got how to setup A cube and which lubes to buy I used vortex As it is most recommended so thanku and once more Really Good Video
This was a really good tutorial! Thanks for such concise instructions. I have an rs3m 2020 and it doesn’t corner cut, even when I loosen and tighten the cube. It also keeps popping even when really tight. Does lubing the cube any differently change this?
Thanks for the video. I have a GTS2M. When I tension it with the center caps off, the screws are so tall that they push up the center caps, making the tensioning pointless (because the center caps end up holding the whole cube apart). It ends up being much looser when the center caps are on. Is this something you've run into? Any solution other than tightening the screws enough to fit under the center caps?
Great video! I have a Gan 356M using the Purple GES on the 0.6 setting and I’m wondering what lube to buy, I like fast but still controllable cubes with a slight gummy feel and a smooth turning cube, I would really appreciate it if you could recommend me a good lubricant combo for what I’m looking for in my cube! Thanks in advance! edit: does the speed cube shop lube (core lube) come with the syringe? Or do I have to buy one for it?
@@TCKyewbs thanks for interacting! I loaded myself up with all your advice prior to buying and trying. 2 drops of Martian in my moyu 3m and 2 drops in my WR m 2019 was enough to make them feel gummy and heavy. I added 1 drop of lunar to see if it'll speed it back up but I think it made it worse.
@@CThienV It'll definitely have a smooth feeling when you drop it in fresh but it typically shouldn't feel extremely gummy or slow. Give it some time to break in and it'll definitely speed up. I've never experienced my cubes being too slow after a few drops of cosmic lube on a fresh cube though.
Lube is really the only most efficient and effective way to speed up your cube but otherwise I recommend just regularly cleaning out your cube when you feel that it starts getting slow. Just take a paper towel and wipe down the pieces to get all the gunk and dust off.
It won’t be too drastic of a difference, it’s mainly there to protect the spring from damaging the center piece. It may become an issue over time so if you’re concerned about it, SpeedCubeShop has a spare parts service. speedcubeshop.com/collections/spare-parts You can also email SpeedCubeShop for them to help you out!
If it’s a brand new cube you typically don’t need to clean it unless it has a bunch of stock lube. In that case, just take a paper towel and wipe down all the pieces.
![[LIVE] : ONE ลุมพินี 90 | คู่เอก "ก้องไกล vs แอนตาร์"](http://i.ytimg.com/vi/VugIvOstzRI/mqdefault.jpg)
Can we take a moment to appreciate the video's quality!!!
I agree but at some parts the focus was really off. Still a great video though!
Ya bro
Oh yes you can!
You deserve way more subscribers than you have I personally love the challenges and tutorials and you are by far the best youcuber ever.
sus
Jperm has entered the chat
This is such an underrated video! You explained everything so clearly and told the consequences of adding too much lube, what all the terms mean etc.Very high quality!
Thank You TCKyewbs! This will help me set up my RS3 M 2020. I currently have been cleaning it once a week, and I wish it was always as good as it was when recently cleaned. I also have to hear the spring noise when turning quietly.
With this video I will no longer have those problems.
Thanks again TCKyewbs! You have a new subscriber!
Same
Omg a heart
RedNinja18 you are welcome
noice
Is that how often you should clean a speed cube I also have a rs3m 2020
Iv been speed cubing for years and still found this tutorial really informative and well presented 👍
thank you so much now my cube is really fast😃😃
Wow! That thumbnail is *awesome*
That isn’t new for her
She is TCKyewbs!!!
The Speedcubing Studio true haha
Got myself a speedcube for the first time today and this is the video that i am really looking for. Thanks
Very best cube setup video I’ve seen so far!
This was a really good video!! Awesome production quality as always! Keep goin'!
I recomended my frined that bought the rs3m 2020, this video would be great for him
The highest quality videos I have ever seen in my life!
You deserve 100K subs, girl!
Good luck⚡⚡🔥🔥
best guide out there tbh
so glad i found this gem of a channel
Appreciate it!
Fantastic video! Fairly new to speed cubing and setting up my own cubes. Your video helped me a lot! My cubes have become much better thanks to you! Very comprehensive and easy to follow. Definitely one of the best videos for setting up a cube I've found, if not the best! GJ! Quick question: what do you do with the remaining black Vortex lube in the blue dispenser tip after you finish lubing the core? Should I be cleaning (or washing) it out or can I leave the black Vortex lube in the dispenser tip until the next time I lube the core of a cube? Thanks again for the content. It was extremely helpful!
Thank you!! Glad it was able to help you 🤗 I just leave the Vortex in there and hope it gets dispensed the next time I use it haha
Thanks! I never fully set up my gts3 before and this tutorial made my cube feel so much better!
Wow ! This is the most complete tutorial ! This is very helpfull and I will share it with my friends !
Thank you very mich for this video !
Gosh I wanna set up my cubes and I saw this video uploaded yesterday
Great quality video and information. Keen for more technical cube videos like this! And more 3x3 stuff :)
Your videos are such high quality. Great information and really interesting!
Thank you very much for helping me :)
I love you you saved my RS3M!
Thumbnails are on point
perfect liked and subbed after I took the core apart I watched another vid on how to clean the cube then let it dry then did your tips
Thankyou. Works great on the original WRM too. My kids bought the lubes too...😁
I like putting a slow lubricant on the internals(like the torpedoes, corner stalks, etc.) ONLY. And not on the actual pieces. So now its controllable yet quick and also smooth. Not lubricating the pieces also gives it a sandy-ish feel
It’s plastic rubbing on plastic tho
Awesome new vid!
Great video thank you
love the audio quality
Great video and advice! Tyanjs
What a guide!
dis needs to start
Yes
My rs3m 2020, hair got stuck in it, so I loosened it with the screwdriver thing, now I don’t know what’s the default setting for the screw
Very excited
Really nice video!
Your content help me really very
Much because I got how to setup
A cube and which lubes to buy I used vortex
As it is most recommended so thanku and once more Really Good Video
I really like slow cubes coz I can't control them. Thank you for explaining in such detail
This was a really good tutorial! Thanks for such concise instructions.
I have an rs3m 2020 and it doesn’t corner cut, even when I loosen and tighten the cube. It also keeps popping even when really tight. Does lubing the cube any differently change this?
Wait an rs3m 2020 didn't corner cut? You might've been scammed cuz rs3m 2020 corner cuts perfectly
How did you get a rs3m that doesn’t corner cut
@@nbs2024 even my rs3m i bought last week doesn't corner cut that well like in review vedios 😕
@@takatekatuka8676 Maybe you got scammed
@@nbs2024 😕probably,i got the accessories and all but i didn't get the moyu card in the box
Might invest in some vortex one day, probably not soon lmao
ong
@@juliojones6820 ?
@@juliojones6820 Hmm... yes
Great vid
Woop woop!! 🔥🔥
Also can I buy a separate washer from somewhere?
What does lubing the core do to the cube?
Yea
abit late but, hpw bout maglev chbe, do the core need to be lubed?
Lot of misspells but lubing the core is your choice if you want to
can you also use the galaxy lube for the core is it not gonna work?
This was a incredible video, and when the rs4 m comes out can you make a setup video about it?
Hype!!!
Thanks for the video. I have a GTS2M. When I tension it with the center caps off, the screws are so tall that they push up the center caps, making the tensioning pointless (because the center caps end up holding the whole cube apart). It ends up being much looser when the center caps are on. Is this something you've run into? Any solution other than tightening the screws enough to fit under the center caps?
Imagine doing this for 50 different cubes, because a real speedcuber has not only one cube.
that is not necessarily true
Is core lube necessary for mag lev cubes? Edit: I have the RS3 M 2021
No its optional i think but try it on 2 same cubes
Hi TCkyewbs I have a question if I wash my cube pieces in water will the magnets rust after sometime?
There’s always the risk so I recommend just using a napkin to wipe down the pieces
@@TCKyewbs thank for replying
I just lost a screw from dissasmbling the core. RIP my gts3m
Oof
Rip
Great video! I have a Gan 356M using the Purple GES on the 0.6 setting and I’m wondering what lube to buy, I like fast but still controllable cubes with a slight gummy feel and a smooth turning cube, I would really appreciate it if you could recommend me a good lubricant combo for what I’m looking for in my cube! Thanks in advance!
edit: does the speed cube shop lube (core lube) come with the syringe? Or do I have to buy one for it?
Galaxy is perfect for the fast but slight gummy feel! All SpeedCubeShop syringe lubes come with the dispensing tip 🙌🏻
@@TCKyewbs oh ok! Thanks!
Just used this tutorial and I don’t know how I didn’t do this before
Have you ever used a brush to apply the lubricant?
Can you please make a The curry or for the gan cubes
Nice vid, super useful :D
I have one question, can I use martian as core lubricant?
You totally can! Just be sure to squeeze some drops in again if the springs ever start to make noise
@@TCKyewbs thank you so much! :D
Noice you desrve the sub
can you show us how you make your videos and thumbnails? the quality of the video and thumbnails is amazing
Is it possible to get so engine to do this as I not great and be good to have someone like you to do so my cubes are better
If you’re cube comes with weight 1 lube, then can you apply further lube of a higher weight because they are both the same type of lube?
Can we use vegetable oil + Vasiline (lips care Vasiline) as lubricant? Or will it be good for the cube a little also?
No dont use home lube its bad for your cube. Buy lube for like 2 dollars
will dnm37 work fine as that is the lube that i have rn
Hey what camera do you use?
If we lubricate the core will there be dust build up in the cube?
Is this just one time or should I do it every now and then
What camera is that
Canon SL2
@@TCKyewbs thank you
This video was awesome but can u pls make a small vid on lubrication of Gan XS
Pls
It's identical
Hey you can watch a bideo on my channel how to setup a gancube and see it might be helpful:D
just picked up the cosmic lube sample kit.
Man, theyre all gummy
How many drops did you use at a time? It’ll only take 2-3 drops after you properly clean out the cube
@@TCKyewbs thanks for interacting!
I loaded myself up with all your advice prior to buying and trying. 2 drops of Martian in my moyu 3m and 2 drops in my WR m 2019 was enough to make them feel gummy and heavy. I added 1 drop of lunar to see if it'll speed it back up but I think it made it worse.
@@CThienV It'll definitely have a smooth feeling when you drop it in fresh but it typically shouldn't feel extremely gummy or slow. Give it some time to break in and it'll definitely speed up. I've never experienced my cubes being too slow after a few drops of cosmic lube on a fresh cube though.
Missing u 😢
What do you use for editind
Galaxy, Lunar, Cosmic etc. They are all good but have you heard of olive?
Bro no
How do I do it with maglev?
I can't afford to buy lube for my rs3m 2020 so can you tell me the needs on how to make my cube faster without the lube?
Lube is really the only most efficient and effective way to speed up your cube but otherwise I recommend just regularly cleaning out your cube when you feel that it starts getting slow. Just take a paper towel and wipe down the pieces to get all the gunk and dust off.
How bad is it if I don't use a core lube? SCS is all out of stock and I'm not gonna pay 12$ for shipping an order of just lube from somewhere else
Do you HAVE to lube your core because jperm does not and i am confused
I think if you have annoying spring noises then yes, and if you don't, it's not necessary.
does rubik’s cube lube work?
If I miss a washer hwo does it affect my cube? I miss the washer on the red center and I have absolutely no idea where it might be its lost.
It won’t be too drastic of a difference, it’s mainly there to protect the spring from damaging the center piece. It may become an issue over time so if you’re concerned about it, SpeedCubeShop has a spare parts service. speedcubeshop.com/collections/spare-parts
You can also email SpeedCubeShop for them to help you out!
@@TCKyewbs OK thanks a lot!
Thanks mam
Is it okay if i only use 1 lube bc i have no money right now
yeah
so
I dont need to lube my cube core when its maglev
damn that camera is high quality
eeeeeeeee start
Hello fellow cubers
Hi
Hello
Hi
@@TCKyewbs hi
Hi!
Yeaaaah
Wrm 2020 là main bạn à
can you do how to set up a 4x4?
Absolutely!
@@TCKyewbs Thank You! I really need help setting up my 4x4!😃😃
@@xdjarvis47 same lol my meilong 4x4 feels way too sandy
How do I clean the cube?
If it’s a brand new cube you typically don’t need to clean it unless it has a bunch of stock lube. In that case, just take a paper towel and wipe down all the pieces.
Be Grateful to all the people how doesn’t know how to set up a 3x3.
Pls any one say me how to decrease the settings from high to low (8 to 1)
Pls pls 🙏replay anyone
Replay? Replay the vid lol
Me too !
my rs3 m 2020 is now very slow but my mom wont let me buy a single lube
Clean the pieces with a towel (interior) and then put water as a lube (it works) not too much though try that
Ik this might be better but , I'm lazy and gans ges works perfectly
I oersonaly think comet is best lube
Noice
Why does this premiere while I’m sleeping 😤😤😭😭
Lel
how do you get so much bokeh in your videos???
lens really helps. Canon also makes cameras that excel at that.
Hi
Hi and I'm from India . And I love your videos ❤️ so much and I'm waiting for the face reveal at 100k sub.
Nerd!
Just put in some hair oil, ....yeah it works