Hey there Stuart. I just love your work and wanted to say a big Thank you because the code you provided worked for me today and i ordered a few goodies for my T120. That was very fortunate because i didnt have the money on Black Friday and i was so happy to see that the code was still in effect. Big big thanks mate
Thanks Stuart! You were the one to introduce me to Motone when I bought my T120 a couple years ago. I love the quality of their products but if I had one complaint it’s that they don’t include instructions with their parts ( kinda crazy when you consider even my iPhone case came with an “installation” guide)! I just received my tail tidy with Eldorado tail light and two sets of the Pico indicator lights with associated looms and brackets but not so much as a wiring diagram! Guess all Bonnie owners come out of the womb with this knowledge, pay someone $150 an hour or watch your videos! Wish me luck and tell Sam to invest in some videos of their own or start paying you mate!
Dear Mr TwattKnacker, The mounting bracket needs to be half its width, when viewing from a vertical centre-line. Make the same bracket suitable for left/right hand road users by rotating it left or right. Dispense with the row of countersunk mounting holes, and replace with front facing indentations, to effect height adjustments. In my opinion.
It would be nice if they made a version without the tail light. This alongside their multifunction rear lights will look really clean. Time to crack out the angle grinder.
I'm sure if this would be used by Triumph as the normal place for the number plate and back light, there would be kits available to place it where it normally has to be 😉 A no go of this kit is, that it has just one fixing point. If it gets loose it could bring you in a dangerous situation.
Hey up..Stuart Looking forward to when Motone Sam designs one for the Speedmaster.. Thanks for the discount code.. I've bought some brass bar ends to go with all the other Motone brass bits I have fitted to my Speedy. Ride Safe buddy. 🏍....... 🤟😎
They done a good job with that bracket , I have one of those Eldorado rear lights on my Interceptor in solid brass and it’s well made and looks awesome. 😁 Cheers {Note this bracket hasn't apperedon their website as of yet. Even if you put is the part number just FYI}
Wrong side of the road, ok but we are many countries that did not get it right Stue , worse my province drive in the center of roads , guess we are not taking a chance lol
I do like the brightness of this tail light and it is a very nicely made piece of kit. Are Motone thinking of expanding their range of quality gear for Enfields? Or perhaps I should ask, do you know what they have in the pipeline Stu? Cheers
I fitted a 'Tail Tidy' and a nice sounding, but not too loud 'Slip on' EU compliant exhaust. ... about a year later my motorcycle was due an ITV..(MOT)...This is where it all went wrong. The inspector failed the bike straight away. The tail tidy wasn't an original fitting... As for the EU compliant exhaust...Likewise.!... Not homologated !! I mention this because I remember you making a video on the subject of fitting non factory 'after market' equipment in the UK and its possible effect on manufactures of such items. It my case I had to return home ...deflated!!...exchange all the offending parts for the original OME for a re-test... Sorry for the length of this comment but I thought it may be of interest for some of your contributors ...Greetings from España
As usual with Motone this piece is top-notch with regards to quality, as I'm sure the price is too. I just see no practical purpose for it whatsoever. To each their own as they say.
Thanks Stuart and Sam for your collaboration for Black Friday - taken advantage of this offer 👍
Wow, their prices are astonishing!!!!.
Mr Twat Knacker should be proud of himself! A very nice piece of kit.
Hey there Stuart. I just love your work and wanted to say a big Thank you because the code you provided worked for me today and i ordered a few goodies for my T120. That was very fortunate because i didnt have the money on Black Friday and i was so happy to see that the code was still in effect. Big big thanks mate
Can't find the sidewinder on Motones Website?????
Same can't find it on website
Gotta love Sam's sense of humour 🤣 , great discount from Motone and they rear light looks a nice bit of kit 👌
Haven’t had a chance to look through all of your videos, but have you installed a USB port on the classic 350? Thanks
Dear Mr Twattknacker... Fantastic !
Man I hope this is going to work on the bobber. Great vid my friend.
Thanks Stuart! You were the one to introduce me to Motone when I bought my T120 a couple years ago. I love the quality of their products but if I had one complaint it’s that they don’t include instructions with their parts ( kinda crazy when you consider even my iPhone case came with an “installation” guide)! I just received my tail tidy with Eldorado tail light and two sets of the Pico indicator lights with associated looms and brackets but not so much as a wiring diagram! Guess all Bonnie owners come out of the womb with this knowledge, pay someone $150 an hour or watch your videos! Wish me luck and tell Sam to invest in some videos of their own or start paying you mate!
Can't find it in the website
As always thank you for the info uncle Stu
Nice one Stu that's a lovely piece of kit , take care & ride safe , enjoy the show
Quality gear as expected from Motone, a lot of thought went into the design. Enjoy your weekend Stu.
Brilliant video as always Stuart and that’s a really smart, well thought out light, I like it a lot 😃👍🏻👏🏻
why it’s u se this big size bracket for installation ??🤔🤔😢😢
Dear Mr TwattKnacker,
The mounting bracket needs to be half its width, when viewing from a vertical centre-line. Make the same bracket suitable for left/right hand road users by rotating it left or right. Dispense with the row of countersunk mounting holes, and replace with front facing indentations, to effect height adjustments. In my opinion.
It would be nice if they made a version without the tail light. This alongside their multifunction rear lights will look really clean.
Time to crack out the angle grinder.
I'm sure if this would be used by Triumph as the normal place for the number plate and back light, there would be kits available to place it where it normally has to be 😉
A no go of this kit is, that it has just one fixing point. If it gets loose it could bring you in a dangerous situation.
Can't fall of if its tightened correctly. If you don't tighten shock bolts correctly you shouldn't be touching such things.
Nice one Stuart, tasty piece of kit.....
Hi thanks for the discount code but I’m afraid it doesn’t work I’ve tried twice now?
Thats because it expired years ago, you need the most up to date one.
Sorry stu my mistake
@ sorry mate my mistake i look forward to this years video all the best and your videos are very informative and interesting thanks
@@bobber1200 New black Friday code going up this Friday!
Hey up..Stuart
Looking forward to when Motone Sam designs one for the Speedmaster..
Thanks for the discount code.. I've bought some brass bar ends to go with all the other Motone brass bits I have fitted to my Speedy.
Ride Safe buddy.
🏍....... 🤟😎
They done a good job with that bracket , I have one of those Eldorado rear lights on my Interceptor in solid brass and it’s well made and looks awesome. 😁 Cheers {Note this bracket hasn't apperedon their website as of yet. Even if you put is the part number just FYI}
Great vid Stu, have a good day. 😊😊😊👍🏻
Wrong side of the road, ok but we are many countries that did not get it right Stue , worse my province drive in the center of roads , guess we are not taking a chance lol
Guys we need to hit 100k as soon as possible so help this channel and make coming new year really happy 😊.
Hi seems a nice smart plate 👍
Where's the discount code?
video description.
I do like the brightness of this tail light and it is a very nicely made piece of kit. Are Motone thinking of expanding their range of quality gear for Enfields? Or perhaps I should ask, do you know what they have in the pipeline Stu? Cheers
Hi Stuart, can you pls help me to get round Led tail light assy for my interceptor 650. In india I could find better one.
Hope your support. Thanks
"Twatknacker" tut tut.
I fitted a 'Tail Tidy' and a nice sounding, but not too loud 'Slip on' EU compliant exhaust. ... about a year later my motorcycle was due an ITV..(MOT)...This is where it all went wrong. The inspector failed the bike straight away. The tail tidy wasn't an original fitting... As for the EU compliant exhaust...Likewise.!... Not homologated !! I mention this because I remember you making a video on the subject of fitting non factory 'after market' equipment in the UK and its possible effect on manufactures of such items. It my case I had to return home ...deflated!!...exchange all the offending parts for the original OME for a re-test... Sorry for the length of this comment but I thought it may be of interest for some of your contributors ...Greetings from España
As usual with Motone this piece is top-notch with regards to quality, as I'm sure the price is too. I just see no practical purpose for it whatsoever. To each their own as they say.
👍❤️🙏