ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2024
- In this video i will be showing you how to Disassemble and Reassemble your Dell Inspiron 15 7000.
Also changing the thermal paste to Grizzly Conductonaut Liquid Metal and dropping TEMPERATURES BY 20-30 DEGREES.
Tear down your Dell Inspiron 15 7000 Step by step
📢 Checkout my Amazon picks: www.amazon.com...
👉 Do it yourself service:
● Screwdriver kit!: amzn.to/2CATV8e
●Shop Towels Original: amzn.to/2TFXF0O
● Thermal pad: amzn.to/2qGhftp
● 3M Scotch Super 33 Plus: amzn.to/3duC2r2
● Torx Security T8: amzn.to/2yxbFyy
● PH00 Phillips: amzn.to/2EHEvl3
● Tweezer Set: amzn.to/2yvNjVV
● Electric Screwdriver: amzn.to/2D0iGvq
● Thermal Paste: amzn.to/2O3g3u4
● Liquid metal: amzn.to/2PzGJmN
● Canned Air: amzn.to/2yzuNf9
● Air Blower: amzn.to/2O4f78F
● Alcohol isopropilico: amzn.to/2qGMIws
● Shop Towels Pack: amzn.to/2M44Ybj
✖ Equipment Used:
● Hakko Hot Air Station: amzn.to/2O1k0PX
● Nozzle for hot air station: amzn.to/2D21XYM
● Hakko Soldering Station: amzn.to/2PRrtCF
● Hakko Air Filter: amzn.to/2O2zJyf
● Microscope: amzn.to/2CDqyCb
● Kester Solder: amzn.to/2D2Bl9R
👉 Upgrade your m.2 ssd harddrive (6X FASTER THAN REGULAR SSD DRIVES):
● Samsung 960 PRO 512GB nvme: amzn.to/2J2Q8jR
------------------------------------------------------------------------
✖ uFixTek is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com
...
Thank you for the video. It made disassembling and further reassembling much easier.
My laptop was throttling for almost 2 years. Couldn’t figure out until I realized it was all dried-out, old crumbling thermal paste to blame.
Also, thanks Dell engineers for making that complicated.
Glad it helped, Thank you for the feedback and your support to the channel by a SUB :P
if you have any request or question feel free to ask.
LOL this is nothing compared to some other models that they have, if you think this is hell you don't wanna see the devil yet :P
I used this tutorial to replace the thermal paste with artic mx4, as I had suspected using liquid metal would lead me to make a mistake a possibly kill my machine. I was right, some mx4 got onto the capacitors, I cleaned them off, and made sure everything was fine, put it together, and it worked! Maybe once I'm better at applying thermal paste I'll try using liquid metal. Thanks for the video! Only took me 4 hours to do though
I did this on a similar model, it is the inspiron 7577 I believe, it has a gtx 1050 and a core i5-7300hq. Only some minor deviations
thank you for the support to the channel by subscribing :)
and i appreciate your tips and opinion regarding the repaste, and look at the positive side now it took you 4h next time it will be 2h and before you know it you can do it under 15min and the best part you will be able to help family and friends :P if you got any request or questions in the future ask me in any of my video comments :)
Great video and explanation! I was able to clean the dust out of my laptop and replaced the thermal paste with some fresh new noctua. Thank you so much! :)
It's my pleasure, my friend. 😊 I deeply appreciate your taking the time to provide feedback. If you're inclined to support the channel further, feel free to like and subscribe-or even both!
Should you have any questions or requests in the future, please don't hesitate to ask me.
🍻cheers
Thank for this invaluable infovid sir., I wouldn't mind having paid a few bucks for this content, that's how valuable this video is to me - saved me a humongous amount of time.
Tobias Andersen i really appreciate your comments, im trying to help people so they can do it themselves the service or repair. I always try to do improve on my video qualities and speech. I appreciate your subscribe and liking my videos this is a great help, i have a long therm plans for this channel, next step is showing how to repair at component level. I hope i can reach as many people like you. I always answer all my comments, so if there is any question regarding electronics dont hesitate to ask. Thx
@@uFixTek I LOVE YOUUUUU
Did everything as instructed, got ∆t of 23°. Used thermal grease conductonaut as ufix, im very happy that someone actually didnt lie about this improvement in temperature, now my pc runs smooth without thermal throttling and the rpm of fans decreased from 5000 to 4100, which also lowered noise from my notebook. Thanks for the vid man!
im glad that it did helped you out my friend and i appreciate your support by sub,a nd if you got any questions in the futures you may ask me in any of my video comments :)
cuantos grados te arroja maximo jugando ??
@@SCkRAPMC it was running 87° C, now its running 64
@@SCkRAPMC you should also do checks every half a year to be sure that its doing fine inside
What notebook are you referring to in this comment? If you don't mind me asking?
I cant wait for the next weekend to apply this tutorial. Currently, my thermal paste is on the way and my laptop is 4+ years old. Wish me luck! Great video btw, keep it up!
Good luck! Glad you liked it 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
if you have any question or request in the future feel free to ask me.
@asf asfd yes, i also add nail polish. It has been running great for 6 months without any problem. The downside is like you said, im afraid to take it around because the paste MAY spill all over
Thanks a lot man! U saved my summer holidays, now my pc is ultra fast
Glad I could help! and thank you for your support to the channel my friend by a sub :P if there is anything else i could help you with let me know in any of my video comments. enjoy and happy new year
Thank you so much! I've done perfectly with your video, took me like 4 hrs to do it but hell you helped me a lot!
Glad it helped! and thank you for the feedback :) and good luck if you got any questions ask me out.
ty for agony dell engineers
Fethi OZAR can't complain about good build quality
at first, its look complicate, but after second or third teardown, its not that complicated.
Abi selam bir şey sorabilir miyim?
@@ThePASA evet?
dang what a pain in the ass just to get to the cpu, oh well? idks? aksdhjaisljdalskjd O_O_O_!!L:AS?AS
ty for the video. there's no way that i'll be putting this back together once I pull everything apart. lol
exactly my thoughts
The chance that some minor does not work and I'll have to disassemble again is too damn high
Exactly.. I was thinking the same.
This was super helpful in trying to repaste my laptop
It's my pleasure, my friend. 😊 I deeply appreciate your taking the time to provide feedback. If you're inclined to support the channel further, feel free to like and subscribe-or even both!
Should you have any questions or requests in the future, please don't hesitate to ask me.
🍻cheers
Amazing Detailed guide 🙌👌 , thanks a lot man
Glad you enjoyed it! and thank you for the feedback.
Thank you very much for your guide and explanations, my repasting went well!!
Glad you enjoyed it 😊 Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
if you have any question or request feel free to ask my anytime my friend :)
Exactly what I was looking for! My battery is bloated, my fans are very dusty and hence my 15 7000 is running very hot. (Idling at 80 C, maxes out at 100 C causing the CPU & GPU to throttle to 1.8 GHz) I have bought the "Noctua NT-H1 Pro-Grade Thermal Compound". Hoping it will drop my temperatures by at least 10 C, since LM is quite expensive in my country. Do you think I can do the maintenance by myself? What suggested screwdrivers would I need to open all the screws you did in this video? Also my fans are terribly dusty, how would one clean them (water? )? Excellent video! Keep up the good work. You've earned a sub. :)
I'm glad that this video can help you out, if you are a bit of handy man and know how to put a IKA chair together, then trust me you can follow my video and if you have any question ask me i try to reply quickly. regarding the screwdrivers grab any cheap set of screw driver but if you want to service often you electronics get the one in my video description. about the fan noise never ever use water , you need a old tooth brush and a "Alcohol isopropilico" link in the description. you can use the same alcohol to clean the motherboard, its safe. i would recommend you to put a copper shim on gpu and cpu 20mmx 20mm .3 or .4mm thickens. and you will have to put thermal pasteon gpu/cpu then on othe other side of the copper shims. you will be shocked by temp drop. good luck
@@uFixTek Just removed the bloated battery yesterday and have enjoyed doing it. Will now move on to removing the dust while cleaning it with the suggested alcohol for everything inside. Thanks a lot. Will update and text you if any help needed.
@@uFixTek thanks for the shim idea.
You helped me a lot with this video. THANKS!!!!
You are most welcome, Glad you liked it 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
if you have any question or request in the future feel free to ask me.
Was gonna subscribe but I already was... u always save my life bro
thank you for the feedback and support to the channel, my pleasure if you ever need any help let me know.
Thanks man you really helped me..much love
Glad I could help, thank you for the feedback :P
Nice video. I am experiencing throttle in games with the same laptop. I have MX-2 thermal grease right now and is it worth to put it on the laptop? Or should I go with liquid metal?
Тимур Файзиев i would highly recommend you to get LM it’s worth the wait. Once you go LM you never have to look and worry regarding your temps, ever again, just a regular dust cleaning.
@@uFixTek how's the temp difference a month later? honestly thinking of doing this on my Dell 7000 laptop
@@neverstopz9045 the temps are the same the temps wont change unless the heat-sink is filled with dust , i personally have LM on my alien-ware and my pc gpu and they are solid and they have same temps as day one when i put on the LM.
Hello, what kind of thermal pad would you recommend for this knee? Could it be 0.5 or 1.5mm? So what exactly is the thermal pad used as stock?
🫠Regarding your question, they used .5mm thermal pads and you can change them for a better quality: Gelid Solutions GP-Extreme: amzn.to/3Sv1Fid
Should you have any further questions or requests in the future, please don't hesitate to ask me.
cheers🍻
This is an Amazon affiliate link. When you use my links, you are helping to support the channel. 🙏
Hi, i did everything like you on the video, but my laptop won't start, power button is dead. When i lauched it for the first time, fan's were very loud but no display, anything. Now when i am trying to turn it on, nothing happens, even fan's dont work. What can be the problem?
can you double check the flex cables mostly the flex cable that goes to power on board. and send pics and let me see what you may have done wrong.
@@uFixTek Ok i will check and i think it could be the problem because i broke that lock which is holding the flex, so a used a tape to hold it... xD
Any idea what can i do in that situation? Tape is a good idea? Edit. i found that little plastic lock and it looks good, is there a chance to put it in the slot
to place a cable properly?
that is very detailed and well explained tutorial...hats off to you
Glad it was helpful! and i appreciate all of the supports i could get. if you ever have requests or questions ask me on any of my videos :)
I have this same model 7567 with gtx 1050ti, can I change the motherboard for the model gtx 1060 7577 would be compatible this exchange?
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your question: Absolutely NOT, we have tried the heatsink profile is very different and the heatsink for 1060 wont with in this case.
Hello, thank you very much for the video, I have a question, can all this maintenance process shown in the video be done without removing the battery from the motherboard?
Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both!
Regarding your question, absolutely NOT recommend you to do that, You must remove the battery before performing a full service.
Hey, will you recommend replacing the thermal pads as well?
NOP no need to. unless you do a over clock then yes , if no over clocking then no
Thermal pads won't help shit nothing, first of all, thermal pads have very low thermal conductivity, and also comparing one to another, there's very small difference, also RAM chips don't run hot so you almost wouldn't even need the cooling and third, there's common thermal surface, this means that all chips are cooled with same surface, same cooler, so if the cpu/gpu runs extremely hot and the whole cooler is hot, it won't help much if ram/pwm is cooled with same warm cooler...
i ave tis computer but some letters dont function, is mandatory to buy anoter new or can I repair it. do you know were I can buy
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your question: jajaj im sure the "H" is one of them :P
yes you have to replace the keyboard, the keyboard are not repairable.
shorturl.at/pzILP
I understand that liquid metal can not be changed? or does he have an expiration date? I use a grizzly cryonaut and it also copes well and does not dry) will there be a difference between it and liquid metal in temperatures?
LM can be changed and you can clean and re done it, and it does NOT expire! the only expire kinda stuff is if you place the heatsink and lift it after few days you must clean and repaste it. any type of paste they have expiry date and the date is based on the use and heat pass. normal use 3-4 years. LM will give you 4-5c extra drop. good luck
hello sir, do you think the PTM 7950 (thermal pads) does the trick here for repasting the old stock thermal paste? 😅 do you think the 35mm X 50 mm is perfectly fit for GPU and CPU ? thanks or should i buy arctic mx 4 in 2 or 1 grams.
btw your video is such a great help for my enourmous racoon hand
Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both!
Regarding your question, if you can get PTM 7950 use that and it will be awesome and last longer.
35mm X 50 m should cover both.
Should you have any further questions or requests in the future, please don't hesitate to ask me.
cheers🍻
Great video, helped me a lot. Thanks!
Hi ,I got that same Dell 7577 , the keys 2,w,s,x don't work, is it the keyboard.
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your question: yes it very common issue with this keyboard as it absorbed a lot of heat and starts going bad like cancer, it will expand to the rest of the keyboard, you must replace the keyboard, the keyboard has to be replace from inside the palm-rest. here is an example of how to replace a mesh keyboard, its the same technique: th-cam.com/video/lc6PUlPlpP0/w-d-xo.html
thank u for uploading. the video is edited well & made easy.
You are welcome! Glad you liked it 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
if you have any question or request in the future feel free to ask me.
@@uFixTek what is the exact model of this laptop? Is it safe to do? Can do the same on my 7567?
its the same 99% as your 7567, BUT i would highly recommend you to not place a LM.
go with : thermal grizzly kryonaut extreme: amzn.to/3Ng1vXE
the LM is very good but very risky and fragile if you move the laptop a lot, its good for computers that don't move from its place. because LM will dry after a month and it will create a perfect bound and awesome heat transfer but once its dry and bounded its at its most fragile state, any slight vibration or hit it will crack that bound and you will get the worse heat transfers, but use the PASTE version you will get almost the same result with a factor of 2-3c difference, but its none conductive and it will not dry for 5-6years.
i hope i have explained my self.
@@uFixTek oh, thanks a lot for the insight. much appreciated.
how about this one, corsair tm30 performance. its available in the place i live in so i was thinking of this one. is this as good or good enough?
That's totally fine i would use it too, it has a very excellent thermal conductivity.
hey bro, how much does the temperature drops? and will it increase performance in my laptop?
the temps drooped from 95c to 68c on gpu cpu was over 90s and drooped to 75 , on over load. it will for sure improve performance as your cpu wont over throttle . and dont let no one fool you with exact numbers as exact number have many factors , room temperature programs that use cpu or gpu or both and many other factors. but it will for sure change your life :P
uFixTek Ight, thank you very much, I’m from Mexico so it’s kinda hot here so I had a problem since I bought the laptop, the temps on the cpu were to high all the f time so I had to under clock, that stopped the problem and also stopped Intel alert systems telling me every 5 min the cpu was to hot. But I’ll try this metod for shure, thanks again man.
@@enlamiramxes ah ntp compa , si gusta igual nos puedes enviar tu equipo lo hago aquí en mi taller ando en queretaro yo, soy de canada pero vivo aqui. ya me han mandado varias alienware otros subscribers de mi canal que estuvieron en otro estado. igual se le hago un video para que veas el trabajo echo . saludos
The fan of the cooler of mine is so noisy! Is it normal in this Dell gamer?
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your question: under heavy load they do sound very loud, but you can def make it better by replacing the thermal paste, if you not going to use LM, use the alternative in paste that gives you same results almost with 5c difference.
thermal grizzly kryonaut extreme: amzn.to/3aY6ldX
please help me, i want to upgrade my processor from i5 to i7 but watching the video i cant see the processor like others computers how can i upgrade the cpu then?
THE CPU is NOT up-gradable its soldered on the motherboard. soory
hey, i've got another question. do u think samsung 980 500gb ssd would support my inspiron 15 7567 laptop?
yes it can take it, amzn.to/3K76oQU
no issue whats so ever.
Im a lil late to this. Been using my laptop for 3 years plus to 4. About to repaste and seeing this vid realized there is thermal pad. Since im gonna repaste, might ad well change the pads as well. Did u by any chance measured back then the thickness of thermal pads?
Thanks in advance
Thanks ✌ for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
Regarding your question: i would recommend you to keep the original pads as they have a life span of 13years and those components don't go over 60c but if you wish to replace place this .5mm:
amzn.to/3gseKpC
This is gold! Thank U!
It's my pleasure my friend🍻😊
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
If you have any future questions or requests, please don't hesitate to reach out to me. I'll be happy to assist you
Hey, i followed the video but when when I press the power button the fans spin at full speed for a while with no display at all and then they stop and nothing happens, do you have any idea what might be the issue here?
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your issue: it happens often that bios dont detect the rams , i recommend you to follow the steps: remove both rams, and press power on and wait 3sec and force shutdown by holding the power button for 5sec, and once its totally off, the place one ram in the dim closes to motherboard and power on and wait up to 10sec to get a screen once you got logo or boot, the power off and add the 2nd ram, and power on wait 10sec and you should be all set, also check all you connectors.
You are the legend
It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P
Should you have any further questions or requests in the future, please don't hesitate to ask me.
It's been 3 yrs since i got my laptop and never repasted. Do you think 47-57C idle & 70C - 85C under heavy load still optimal?
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your question: you fine if you start hitting 90s then open it up and clean and repaste but you fine for now my friend
What happens if by mistake I remove or detach the part that holds the metal hard drive cable to the motherboard, just the one you say that only a few millimeters 😬
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your question: can you send me a picture of the damage you have created :P ?
What is the material of the heatsink on the XPS15 L502X ? I see its copper but what is the silverish araound it ?
It's a coating of zinc. It's commonly applied to heatsinks and coolers to protect against corrosion.
What is the size of the thermal pads??
Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both!
Regarding your question,.5mm and 1mm pads.
Should you have any further questions or requests in the future, please don't hesitate to ask me.
I need help! After putting in the thermal paste and reassembling, now my laptop turns on with a blank screen and fans on but then shutsdown automatically after few seconds. What should I do?
Remove both rams, and plug in and power on and power off, then only plug one ram and power on and once you get a logo, then power off and place the 2nd ram and power on and it may take up to 15sec and it may restart twice.
Compre esta laptop usada y cuando le quise poner pasta termica, veo que uno de los tornillos del plastico gris de donde sale el aire esta con un circulo en vez de una cruz para desatornillarlo, ayuda .-.
es tornillo torx con secure lock, es un desarmador de torx que lleva un pin, me puedes manda un foto bien tomada de tornillo y te mando link de desarmador
ask@ufixtek.com
it is okay if i add copper pad on gpu and cpu, do u have any suggest for the copper pad thickness (0.3mm-1.0mm)
btw thanks for the tutorial video i appreciate
Edited:
wow my laptop turn into 67C from 95C in full load with liquid metal and shim 0,3mm
sure you can use a copper shim size get 2cm x2cm and .3 -.4 mm
check here amzn.to/2rGhmdc
Hola, gracias por el video. Crees que con un thermal pad de 100x100mm me alcance para todo?
claro que es mas que suficiente.
saludos
@@uFixTek Gracias
por nada🍻
I Followed and did everything now my laptop not turning on. The moment I plugged Inn the both fans runs very fast for few seconds while screen black and then no power at all. No fans no screen and no power light. Please help
something you pluged wrong my friend, remove both rams and only install one ram,a nd power on and once you get display then power off and add the 2nd ram, and double check the connections.
Hey My gpu gtx 1050ti no longer works I’m wondering if can replace the gpu or replace the entire motherboard for the laptop? What would you recommend. My laptop cannot use the graphic card for gaming. Can you please help!
hi and thank you for your support,
and if you want to get your GPU working, let tell you you cannot replace the GPU (not by your self, its called reballing GPU)
BUT you can Fix the issue at home if you follow the following instructions:
#1, remove all the motherboard, remove everything off the board as it shows @17:28
#2. then you want to get a aluminum foil tape : amzn.to/3jh4tLr
#3. then you want to isolate using the tape the GPU, doesnt have to be perfect. you can see how i isolate a gpu on this video ( th-cam.com/video/LPThmVu9-JM/w-d-xo.htmlsub_confirmation=1. ) @8:54
#4. make sure your have no air blowing to the where you working nor A/C is ON,, it most be at room temp or 28c above
#5. get a heat gun or get a hair dryer set it to max heat and medium air flow (heat gun must be at 280c) the hair dryer just sset it to max heat.
#6. place the board on a wood surface , not glass nor metal.
#7. deep the hair dryer above pointing directly to the gpu with 3cm of distance. for 5 -7min
#8. turn off the heat and DO NOT TOUCH OR COOL THE BOARD. let it sit and cool down by it self for 10min.
#9. clean up and place new paste and you will see the result :)
good luck
Thank you so much :D
your welcome :P
Gracias!
gracias por el apoyo amigo. saludos
Hi, one question ... I'm thinking about changing the thermal paste of my laptop (it's the same as the one in the video) I've been with it for two years and I have not given it maintenance or anything and although it does not heat up that much, I've noticed that Warms up more than before, my question is: Is it necessary to change the thermal paste now or wait for it to really heat up a lot?
and what thermal paste recommended?
@@josuepaz1125 if you just want paste, then I personally use liquid silver. However other people in the comments have said some other great brands.
Always disconnet the battery first!
it is a good idea if you need to be extra cautions, BUT as long as the laptop is off, you can remove ram and HDD and m.2 without any issues, without removing the battery. when you look at the schematics of the motherboard you will know that the power rail to the ram and hdd and m.2 and many other ports and parts are off and there is no risk of shortage.
again there is nothing wrong with disconnecting the battery 1st.
thank you for your feedback and comments :)
Hola amigo, veo que andas en México, tengo el mismo equipo, si quisiera mandar a cambiarle la pasta térmica contigo, en cuanto saldría mas o menos con el envio, y el metal liquido ademas de la mano de obra? y por cuanto tiempo dura el metal liquido en el equipo?
mandame un email y hablamos. nose porque cuando pongo mi email aqui se borra el comentario
Nicely done!
do thermal paste (metal one corrode after the certain period)
Thank you! for the feedback and your support to the channel by SUB :P
regarding your question: NO it will not Corrode nor it will go bad regarding the thermal conductivity.
you have to keep one IMPORTANT thing in mind about LM:
#1. LM when applying its in liquid format, so you can safely move the laptop around without any worry.
#2. after few months of use the LM will not stay at its liquid state, it will become hardened and it will bond 100% with cpu and heatsink (it will not destroy or damage the die or the heatsink) , it will cure and it will have even better heat transfer effect.
BUT when its cured at 100% the bond its very very extremely fragile, that means if you bang around the laptop in the bag pack or slow bumps on the table it will crack the cured bond and the results will be HORRIFYING.
if you are not planing to move the laptop on daily bases and it will always stay in one place then sure do LM, else you have to be very careful after few months of applying LM, else you will be forced to reopen and re apply LM.
option: you can use instead of LM use his paste version and the differences are about 3-4c
amzn.to/3tSv2Md
I see you didn't clean the heatsink.. isn't it necessary to clean it when u open up ur laptop, becuase i've heard the dust attached to heatsink disturbs it's airflow.. Some suggest to wash it aswell.. is it possible with this particular model?
Oh ya defiantly you will have to use a tooth brush and compressed air, but in the name of god don't wash it. if you get to wash it you will have to use hair dryer for at least 5min to heat it up nicely, all you need is to use brush and compressed air.
we use this compressed dry air vacuum, that is 1000% better than any air can that is marketing, that it will push humid air and can damage components and also the pressure from this air cans are nothing compared to the air duster.
and the air dusters can be use around the house for many stuff and in a long term it pays off. check it out.
i can't run a service job without the air duster :P
in the video i didn't clean with brush the heatsink because it wasn't too dirty.
amzn.to/3fVoIPg
@@uFixTek idk about compressed air... i really don't want to spend too much on this 5yrs old laptop.. i already got the thermal grizzly LM paste for double it's price, cuz it isn't available in my country atm.. i want to use some household stuff to clean it.. i already have my set of cleaning tools, 6-7 different sizes of brushes, alcohol swabs and a blower.. all i'm waiting is for the paste to be delivered..
then use brush and clean if you wash make sure its dried quickly and leave it in the sun for few hours or something.
@@uFixTek sure thanks! :)
my pleasure my friend :)
I’m scared but i will try. Where should I buy thermal paste?
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your question: here is the link to amazon : amzn.to/35v637M
@@uFixTek of course and thank you. I have Inspiron 15 7000 gaming.. I will 100% follow your video but I’m more scared put it back 😄
don't worry thats why im here to help out if you need help :P
Hello, after doing this operation, how much of a drop did the display card and the processor achieve?
it dropped about 25-35c there is nothing better than LM if you place LM and what ever number you get that the best you can get.
Hey mate. Not sure if you still reading comments for this video.. but I'm curious. If I will do it by myself and gonna take a big attention to each step what you showed in the video, what is actual possibility for me go wrong? Don't want to get in big minuses :D Also question, I'm from UK. What grizzly paste you can advice? Thank you, earlier :)
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your question: i try to answer all the comments, and if you take your time and pay attention, you will be more than fine. don't rush and follow every step and if you need any extra help let me know. trust me you be fine just follow the exact steps.
i recommend you instead of the liquid metal use a paste version its 1000% safer and you get almost the same result only 2-3 degree difference .
use this: thermal grizzly kryonaut : shorturl.at/hkmSU
@@uFixTek I already ordered that grizzly conduct what you wrote in description. Is it bad?
Conductonaut
It's the best, just make sure you follow the video exactly. its very conductive, make sure you don't drop any on motherboard.
@@uFixTek alright. I will do it today a bit later. Should be fine. I bought that tape too, to cover around. I will leave a feedback once I will be finish.
Hello, would you know if they keyboard for Dell Inspiron 7559 is compatible with Dell Inspiron 7567?
Hi! After reassemble fans are working but screen is not. What i missing? Thanks.
You're welcome! Thank you for the feedback and support to the channel by SUB :P
regarding your question: remove both rams
and re insert only one ram in the dim at the bottom, and power on and wait 5-10sec once u get screen and logo , then power off and insert 2nd ram and power on and wait up to 30sec.
I have the same issue. How did you fix it?
Buen vídeo amigo, he estado viendo que vives en México pero soy de Guatemala :( like y sub ;)
aunque no creo que me sirva a mi personalmente, te dejo como recomendación por si sigues haciendo mas vídeos de este tipo enfocar mas la cámara al hacer las conexiones, por lo demás esta excelente, 10/10 me sirvió mucho.
asi es ando aqui en mexico , muchas gracias por su feedback y tratare de hacer los cambios para poder enfocar mas en los conexiones. saludos
@@uFixTek está bien, saludos y suerte con tu canal!!!
Whats the dust build up like after one year? My GPU temps hang around 56*C idle and 74*C on full load. Would you classify them as fine? I dont want to have to go through all this effort just to remove a small amount of dust.
no one can help you to tell you but cleaning should be every 2years minimum, there are many factors : where you are is it dusty and the amount of hours that you have your laptop on. if your temps are on 65 idl u still kinda ok, but idl should be 40s.
Hi, I would like to replace the hinged air rear cover. Can i just remove it without touching the internal?
Thanks ✌ for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your question: what part is that you want to replace the hinge or the rear cover?, to remove the hinges you have to remove the panel only not the motherboard.
and for the back cover only remove the back cover as shown in video @7:00
I went through this bullsh*t yesterday. Damaged 3 screws in the process cause they were screwed too tight in factory.
i have no idea why in hte hell they screw the screws so tight, but the screws are dirt cheap and all you have to do make an insertion on the screw heads and use a flat head to remove them, and you can take the screws to any electronic repair shop and they will donate few we always have 10000 laying around. but i hope you you did the repaste and cleaned up at least.
Thanks
My battery looked kinda inflated with some bumps (it was not flat like yours)
You will need to replace the battery as it will inflate more and damage the laptop. The model of the battery is written on the battery.
cheers🍻
what should i do when my lock to the hdd cable just broke?¨
regarding your question, you got two options, one is to take it to service center and get that jack replaced and 2nd is to place a .5mm plastic over the flex cable to be able to push the fable to the connectors.
Bro I did everything but my keyboard doesn't work anymore. The power button. Whereas when I open kboard flap sometimes it switched on by itself & then some buttons stop working eventually. I think I made some mistakr with keyboard connectors, I couldn't get them properly. Please help me!
dont worry will get it fixed,
can you send me a picture of your connectors @10:14 make sure the white ribbon is well pushed in. use imgur.com/
imgur.com/a/PINRmLx
make sure the blue part of the ribbon is facing up and push it in well and close the flap.
Usually, you don't want to spread manually the paste as it creates air bubbles.
there is no way you can even create a air bubbles on a crystal dye on cpu or gpu, the only time you MAY *1% chance , is when you have a IHS on the cpu , whe there is a direct dye there is no way in hell you can create a bubble, calculating the heatsink pressure. we have ran many many test, and you will get the same results if you place the thermal paste 20 different ways. thank you for the concern and the feedback my friend.
Almost got to the motherboard but in the end a fcking stripped screw got me, gg dell, gg Chinese factory you’ve done me well.
林漢青 send me picture there are many ways to remove stripped screws,
uFixTek you sure I can have your email?
I tried using rubber bands and thin gloves, didn’t work
My goal is to just clean the laptop, motherboard has been two years untouched and REALLY dusty, if I can’t get the screws would it be okay to just blast my hair dryer through the vent?
林漢青 👍
¡Excelente video! Realmente estoy considerando hacerlo yo mismo aunque aún me da un poco de miedo 😅
Tengo una duda respecto a la ranura M.2 para el disco SSD, ojalá puedas ayudarme. ¿Es posible colocar un WD Black SN850X? La verdad no estoy muy familiarizado con el tema y según veo las especificaciones del equipo, admite discos SATA o NVMe, pero en éste y otros videos he notado que utilizan discos SATA (2 ranuras) lo que me hace dudar en si realmente podré colocar el SSD que mencioné y, que sin investigar lo suficiente, ya compré.
Es un gusto poder ayudarte. Si es posible instalar un NVMe, independientemente de la marca y modelo, de hasta 2TB. Sin embargo, asegúrate de que tu CPU sea de 6ta generación o superior. Si tu CPU es de 5ta generación o anterior, solo podrás colocar un M.2 SATA con dos cortes.
@@uFixTek Muchas gracias por responder, por suerte mi CPU es de 7th generación.
¿Recomiendas instalar el SSD con un disipador de calor? Ví que hay unos en forma de placa y no sé si debería colocarle uno.
Me suscribo y te envío un saludo, nuevamente gracias!
absolutamente no requere nada de disipador , estaras perfectamente bien.
gracias por el apoyo
How to cleaning the "red headsink thing" ? Because mine little bit oily and trap the dust, so the air flow not good
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your question: you can remove all the pads from heat-sink and wash it with hot water and soap and let it dry or dry it with hairdryer, and blow air into fins.
@@uFixTek ok done,...and thanks for reply
btw we can remove it from the chopper tube ? are you sure ? is that soldered ?
you only going to lift and remove slowly the thermal pads off the heatsink and then clean the heatsink and wash. don't force the copper tube or anything.
Hola, amigo, una duda, el metal líquido no friega el procesador? Por el aluminio que lleva.
También, ¿es buena idea lavar con alcohol isopropílico los radiadores? Yo llevo ya dos años sin darle mantenimiento y ya es hora de hacerle uno mayor, por eso mis dudas.
lavar el disipador con agua o alcohol es importante, luego LM no friega absolutamente nada ya llevo 6 años aplicando LM y jamas friega o dañado el gpu o cpu ni el disipador. gracias por el apoyo saludos
@@uFixTek Gracias por la info, tienes un nuevo suscriptor, para la siguiente vez le pondré metal líquido a mi lap mejor, que quiero que dure al menos unos 8 o 9 años conmigo, saludos.
Amigo, mi lap se enciende con los ventiladores a todo y solo el LED, luego de un ratito se apaga y reintenta, pero mejor la apagué, espero me ayudes, por favor.
@@uFixTek espero me ayudes.
Hello i'm having troubles with the gpu clock on my dell inspiron 15 7000 Nvidia GTX 1050 after a minute or two of gaming it goes from 1354Mhz to less than 200Mhz any idea how can I fix this?
you could be needing a new thermal repaste, when the gpu over heats it can cause this issue., or you could have a bad voltage regulator on the motherboard
I tried opening mine and I hit a snug. One of the screws on the fan were cross-threaded already for some strange reason and I can't get it out, any recommendations? This is all that is left for me to continue on and I can't do so unless the screw comes out.
send me an email with the picture let me see how bad it is and i will respond with a solution.
bdsoporte.queretaro@gmail.com
@@uFixTek Okay
Supongo que la respuesta tiene que ver con la calidad de la aplicación, pero que tan seguro es (menciono por las complicaciones del líquido metal)
Si la instalación es perfecta, el riesgo es 0% a largo plazo
honestamente no hay riesgo si tomas tu tiempo de hacer bien y con cuidado, después de poner y una vez prendido solamente tienes que tener mucho cuidado con golpes y caídas. eso es la única complicación de aya adelante no hay ningún problema. el LM no hace nada a disipador no a gpu o cpu ntp llevamos mas de 16 años en este trabajo.
gracias por su apoyo al canal con un SUB :P
me da miedo hacerlo pero planeo hacerlo el año que viene, cuando consiga las herramientas.
no tengas miedo amigo, cuando vayas a hacerlo avisa me y te ayudo en cualquier asunto sobre el servicio. saludos y gracias por el apoyo al canal
Wonderful video! Just wondering, how is the LM performing now after 2 years? I have heard that it needs to be reapplied every couple of years or it will not cool as efficiently. Thanks for your help!
thank you for the feedback, and let me try to explain the best as i can.
1st of all LM once placed it will last a life time conducting heat or cold, there is not expiry date on it.
2nd. most people that use LM dont understand the physics or the type of the material and the bond that it creates.
the LM will bond the cpu/gpu dye tot he copper , it will act as an soldering two parts together over time this bond becomes even BETTER not worse (better heat or cold transfer). BUT over time it becomes even more fragile as well.
so now we know that it bonds both material and over time the bond becomes better and fragile.
now lets see where we applying the LM,
When applied into Laptops it will work like a charm for a year or so, and after that period of time the bond is becoming better and more solid. but as human we tend to bang around the laptop or the bag-pack , so what happens in that situation is that the heat-sink will move slightly , that will cause the joint to crack, because there will be no more liquid left.
so to cut the chaise , if you move your laptop a lot and its not in one place all the time , i dont recommend you to place a LM unless you willing to replace it every 1-2 years.
if you keep your laptop in once place and are very cautious regarding moving it, then LM for life without replacing it.
same goes to pc.
people place LM in PC cpu and after a year or two they see the temps rising they think its LM faults! and its NOT.
if you think how the heavy heatsinks are mounted to the motherboard and the gravity is not to the favor of the heatsink and that the heatsink is holdup with screws and springs, so it can move/slide, and it positioned on the side of the case.
SO after 1 or two when the LM starts to make a solid perfect bond and one day you accidentally give a tiny bang or move it very slow, that heavy heatsink that is hanging on the side of your case will move and break the bond.
therefore LM is awesome if you are very very carefull with your stuff.
laptops that move around its a no no,
i hope i explained myself,
thanks again for the feedback
@@uFixTek Thanks so much man! You explained way better than what I was able to gather in several hours of web surfing. Now I can make an informed decision to what type of thermal compound I will use. Also, thank you for staying active it the comments of a 2 year old video, sure it helps tons of people out.
im glad it was a help, i try to stay on top of the comments as much as i can, maybe one day i get a profit in return :)
i would recommend you for your laptop to go with :
amzn.to/2XkvipZ
you wont have to worry regarding the transportation of the laptop, and its 95% same results as LM, but this one it does need to be replaced every 4years. (6h a day max load)
good luck
How much better is the temp now ?
Sir i am facing some problems in the motherboard, gpu and bios . Should i replace motherboard or get the motherboard repaired ie gpu changed??
the gpu may need a reballing, its cheaper to do a reballing on gpu.
Does anyone know if the top lids of dell 7567 and 7577 are exchangeable?
Yes it can be replaced you can find it on ebay.
@@uFixTek thanks for the head up, I really want to get rid of soft touch coating of my Dell 7567.
my pleasure my friend :P
Me da miedo hacerlo :( jaja pero muy buen video bro
nah no tengas miedo, si lo cagas o algo mándame msg te ayudo. si sigues los pasos lo puedes hacer bien tranquil. gracias por el feedback :P
disculpa jugando cuanto es la temperatura maxima que te arroja ?
cpu 80 gpu 76, bajo carga pesada
Done everything but don't feel any big difference in temperature.
you don't see the difference in temp because your fan curve is based on temp.
for e.g the fan curve works like this the fan will go @ 80 % when temp is 70c and when temp goes higher the fan goes faster.
the advantage you have now its that your fan does not kick in at max when you at max load.
if you have set the fan curve at e.g 50% and full load before the repaste you would see a 90c
and if you set the same fan speed at 50% after repaste you would see 70c or less
what you get now is less fan noise and faster cooling.
other option is to download msi afterburner and set the fan curve to your liking.
@@uFixTek get it 👍🏻 I didn’t remove that bios stuff because I didn’t want to reset it, because I don’t know to even set it up 😂 I done everything like you said. Any other advice maybe you focus more?
I know my pc now is old, probably need to get normal pc for games but at the moment still grinding money
@@uFixTek and regards video, thumb up. At least I manage dismantle and put it together just from watching video.
much appreciate the support,
i would remove the HDD and replace it with 1tb or 2tb SSD and have my windows installed on a 500gb m.2 SSD and this way you can have lunchers and programs on main windows m.2 ssd and game library and file on other SSD 2.5' this way you will have a better file transfer and no bottle neck.
i recommend the samsung m.2 and samsung ssd 2.5" they are very durable and long lasting.
amzn.to/3Ri8CkL
amzn.to/3DmGfvU
Dose any one know the screwdriver piece for the back screws? That's literally all i need
that is t8 screw driver
Can you upgrade the gpu?
Maxamillion Moslow no the gpu or cpu cannot be upgraded or downgraded.
I cant get out the screw of the LCD cable bracket lol
can you send me pictures. and a closeup of the screw.
I tried the rubber band trick. No luck
ah there is a easy way to remove it :P
make a cut in the middle of the screw and use a flat screw and remove it
imgur.com/a/TcoANgn
you have to comeup with a some way of cutting without buying stuff:
we use this tools to cut the screws in middle (you dont have to buy it , its just showing you what i use) if you know someone that can give it to you for 5min or use some other tools.
amzn.to/2ZkDuGI
amzn.to/2CP8hnF
(imgur.com/a/ZUfqTKo)
Hi there, can I use any Electrical tape, which can withstand the same temperatures as 3M? :) I need to replace vents, but I am afraid of changing the thermal paste as it seems difficult.
if the spec of the tape can resist up to 70c then sure do use it, and dont worry regarding thermal paste its not that hard if you take your time and no rush, and if there is anything you need help with im here to help you out. good luck and thank you for the support to the channel by SUB :P
@@uFixTek the tape should resist up to 105 degrees celsius. I am wondering if the glue on the tape could damage something on the CPU?
absolutely no it will not damage anything.
I love you.
me too :)
hello, one fan doesn't work (left processor fan). Its connected and cables from fan are good. Bios says message to me. Maybe you know a problem ? updated bios and still have problem
left fan only works when the temperature of the GPU goes over 65c. when you turn it on it should not work until you load a game then it should start, and if it doesn't start after turning on a game , send me a picture of the fan and the sticker of the fan.
thank you for the support to the channel.
@@uFixTek BIOS says me alert 0511 and report: fan processor fan mailfailure....and when listning fan's I think is left (not working) when laptop standing on desk and right is working fine...dell says to reset bios to default or update or downgrade (cannot downgrade says: cannot update due to unsupported downgrade / checked in box "allow to downgrade" in bios) ----fan is FCN Brushless motor
@@uFixTek anyway thank you for your Profesional Video, today helped me a lot but if you find a solution of fan wchich don't work after install please let me know....other people on dell forum also have same problems
your welcome and i hope you get everything working , if you need to find to were to buy the fan let me know.
Tengo el modelo con una 1050ti t va pesimo, seria recomendable cambiar la pasta térmica y aumentarle 8 de ram extra? O directamente ya me armo una pc y vendo la laptop?
Armate una
Pero igual es bueno darle mantenimiento a tu equipo yo reemplace la pasta de la mia hace unos meses y las temperaturas son mucho mas estables
si actualizas y lo mejores lo puedes vender mucho mejor y mas$$ y luego armas una pc, nosotros compramos las laptops básicos y actualizamos ram y ssd y lo revendemos por mucho mas de ganancia.
How can I replace the back plate screw?
can you point to the screw and or some pics?>
have you had any issues with the liquid metal shorting out the system?
i been using LM since the day they launched it and up to this day i can surly say that i had never encountered any LM leaking out or what so ever. all my clients are happy and never complained regarding LM issue. thank god :P
uFixTek awesome thanks a lot. My very similar Dell fans run constantly when in any game. I might get brave enough to try this. I guess if I put the electrical tape around it can't do damage.
your fan will be running constantly if you put LM or not! the fan temp controller is based on a diode in the cpu GPU and the fan will spin after 50c or 60c a lot. but it will bring your temps down and that means less fan noise.
uFixTek yeah I'm looking for anything to reduce the fan noises. It just bugs me IDK why.
@@Toyeboy89 oh boi , let me tell you something, you got two options: #1. install MSI after burner and lower your fan spin curve (and be ready to burn your GPU soon... ) because even if you put a magic liquid or call NASA you out of luck because its a simple physics: the heat from GPU/CPU will conduct to the heat-sink via LM but after 2min in order to heat dissipate you need air flow, the more air flow the cooler the heat sink and the cooler cpu then the fan slows down..
#2. put a headset :P
you have to choose there is no magic option here, you can only transfer the heat faster with LM or pastes but you still got to cool the heat-sink after 1-2min under load.
sorry :(
solo me quedaba un tornillo para lograr separar el disipador de la motherboard, estaba barrido:( que puedo hacer? por mas que intente no logre sacarlo
hola, mira si puedes lograr de usar algo de hacer un corte recto encima de tornillo, para poder usar un desarmador plano, asi lo quitamos, voy a ver si hago un video este semana mostrando la manera. saludos
@@uFixTek seria perfecto muchas gracias
claro con gusto lo hare aver si este fin de semana logo para domingo subirlo
Hola buenas! tengo una consulta, tengo un dell inspiron 7000, nunca le he cambiado la pasta termica y lo tengo desde el 2018 y está con un problema, pasa que usualmente se queda pegado y hace un ruido "rrrrrrrr" como por 1 segundo, y luego sigue funcionando, y otras veces cuando edito algún video o algo aparece la pantalla azul y el código que anoté decía "memory management" según leí sería problema de la ram, igual el notebook tenía 2 ram de 8gb, probé una y una, cambiándolas de slot y todo pero sigue el problema, será que las 2 ram murieron? o es problema de otro componente? saludos y gracias! PD: cambiaré la pasta térmica y veré si influye en algo con el problema.
hola gracias por el apoyo al canal, sobre tu problema : descarga este aplicación y mandame una foto toma de pantalla cuando abras este aplicación:
www.hdsentinel.com/download.php
estoy pensando que tu disco esta muy mal, no debes de mover ninguna laptop cuando esta prendida, cuando tengas un disco mecánico adentro.
@@uFixTek Buenas, creo que el problema no es el disco duro ya que hice el test y creo que está todo en orden ibb.co/fCdWWzj saludos!
@@RingoValenzuela oki si no es tu disco, pero en tu caso hay que revisar bien y observar, hay que armarla son gabinete y probar para poder detectar el ruido.
@@uFixTek lo siento, creo que me expliqué mal, el sonido es de cuando se pega el computador, suena en los parlantes del notebook, ya que es como que se congela por un segundo y suena "rrrrr" pero descarto que sea un sonido fisico
@@RingoValenzuela sera que lo puedes grabar para que escucha y vea
Everthing went Great except now my display won't work
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your issue: it happens often that bios dont detect the rams , i recommend you to follow the steps: remove both rams, and press power on and wait 3sec and force shutdown by holding the power button for 5sec, and once its totally off, the place one ram in the dim closes to motherboard and power on and wait up to 10sec to get a screen once you got logo or boot, the power off and add the 2nd ram, and power on wait 10sec and you should be all set, also check all you connectors.
@@uFixTek I just took the ram and put it back and boom my display is back, but thanks for your response on too.
you are very welcome glad you got it working, when every you have any other issue feel free to ask me :)
Damn, how does one remember which screws to use the entire way? Is it an easier process doing it than saying it?
its easy there are not many and you can look at the video if you forget, its not hard at all
Can you swap that cpu for an i7 I have the same laptop and I want to swap it
no the cpu and gpu are bga you cant swap them you will have many many issues , heat problem power management problems and many more.
No se si alguien me pueda ayudar tengo esta misma noteboock vive con temperaturas altas aunque tenga pasta thermal grizzly kryonaut , no creo que sea esto pero por las dudas consulto que grosor tenian los termal pad de este modelo, no sea este el problema(use de 1mm de grosor)
cambiaste los pads termicos de tu laptop?, y pusiste de 1MM??
@@uFixTek si estaban despedasados los originales
tu problema esta que pusiste unos pads mas firme y grueso y eso esta contra empujando tu dicipador, cambia tu pads a uno de menos grosor. por si el vrams no requieres de enfriamentos ya que no son overclocked, hay muchos modelos sin pad termicas.
@@uFixTek OK, y tenes idea más o menos de que grosor son
yo te recomiendo usar .5mm