Here from IG! I have a Tech Pack Blackout and Black out MCT and just got the MC going to start using it daily because I realized everything in my Tech Pac fits in the mc and won’t be heavy I just don’t like carrying a heavy back pack anymore so everything heavy is staying on the pack outs. My MCT is my high voltage bag when doing service changes and commercial.
Good vid 👍 I've been looking at the mp1 but nowhere local to check them out so I ended up getting the veto tp3 and so far I'm loving the compact size and fine tuning the tools for each job. The MC looks like a good alrounder too 🤔
I use a carhartt drink holder through one of my side d rings on my pro pac lt. I think it's made for a belt but fits the d ring perfect. I work in the heat allot though so it may not suit you but you asked for suggestions. Other than that I really like your set up though
Hey Matt, I’d love to know if you can fit you fluke t6 in the large pouch of your mp1? I’ve got the fluke t5 and have been looking into either the mp1 or tp1l but am unable to find any in stores to test if my meter would fit. Thanks
Hey Matt, thanks for the video. Always love seeing how people actually apply the bags in their workflow and not just showing the tools in the bag. When you are doing your service / maintenance do you take both the belt pouch and the MC into the site? If so, do you attach the small one on your waist to do the work and then have the MC as further backup just in case or how does that look on your calls?
Hey Kyle. Thanks again mate. You’re correct, I usually have the mp1 on my belt with the essential hand tools and have the mc as my backup with meters and or drills and so forth.
@@AddictedtoTools thanks for the feedback. I have my setup about the same. ToughBuilt Small Electrician's Pouch on my belt for small service and project site visits / takeoffs with a ToughBuilt Specialist Drill Holster if I need my Impact Driver with some bits then a ToughBuilt Master Electrician Pounch if the service is more indepth. Took me forever to get that system down and I'm still working on it......Cheers!
![เจ็บที่ยังฮัก - ม่อน วรวิทย์ [ Official Mv ] จอนนี่มิวสิค](http://i.ytimg.com/vi/KALIGSRSjFs/mqdefault.jpg)
You young tradies must spend have your day deciding which tool bag to take to work each day. I just had dirty big tool boxes. Great video
Here from IG! I have a Tech Pack Blackout and Black out MCT and just got the MC going to start using it daily because I realized everything in my Tech Pac fits in the mc and won’t be heavy I just don’t like carrying a heavy back pack anymore so everything heavy is staying on the pack outs. My MCT is my high voltage bag when doing service changes and commercial.
Good vid 👍 I've been looking at the mp1 but nowhere local to check them out so I ended up getting the veto tp3 and so far I'm loving the compact size and fine tuning the tools for each job. The MC looks like a good alrounder too 🤔
It’s really surprising how much you can fit in the MC bags. Nice setup mate. 👍
20mm cori conduit works as a really good saw case
Hey Matt, great informative vid as always! Love your work!! Just a quick one…what belt do you use with the MP1? Cheers 👍
I use a carhartt drink holder through one of my side d rings on my pro pac lt. I think it's made for a belt but fits the d ring perfect. I work in the heat allot though so it may not suit you but you asked for suggestions. Other than that I really like your set up though
Nice. I’ll have to give it a look. I want drink holders everywhere 😆👍🍻
Thanks for showing me the bit holder! Bought it last week
The bit holders are almost a must have now. Love them!
Awesome! Thanks for sharing!
Nice tools buddy 👍
Thanks mate. Just subscribed to your channel. You’ve got some good gear🍻
Hey Matt, I’d love to know if you can fit you fluke t6 in the large pouch of your mp1? I’ve got the fluke t5 and have been looking into either the mp1 or tp1l but am unable to find any in stores to test if my meter would fit. Thanks
Good video. Does that MP1 swing around a lot when you walk?
Hey Matt, thanks for the video. Always love seeing how people actually apply the bags in their workflow and not just showing the tools in the bag. When you are doing your service / maintenance do you take both the belt pouch and the MC into the site? If so, do you attach the small one on your waist to do the work and then have the MC as further backup just in case or how does that look on your calls?
Hey Kyle.
Thanks again mate.
You’re correct, I usually have the mp1 on my belt with the essential hand tools and have the mc as my backup with meters and or drills and so forth.
@@AddictedtoTools thanks for the feedback. I have my setup about the same. ToughBuilt Small Electrician's Pouch on my belt for small service and project site visits / takeoffs with a ToughBuilt Specialist Drill Holster if I need my Impact Driver with some bits then a ToughBuilt Master Electrician Pounch if the service is more indepth. Took me forever to get that system down and I'm still working on it......Cheers!
Did he call the level a tape measure or I'm hearing things?
Ahaha 🤣 I sure did.
Did you receive the padded strap when you purchased the bag. I got the Mc camo but only got the standard shoulder strap from Sydney tools.
yeah I did. I'm not sure if it was meant to come with it though. I believe it may have been a mistake when I picked it up. it is a nice strap
Klein makes a foldable sheetrock saw. So you would not need to put your saw in a hose or damage your pouch.
Nice vid w/o a doubt.
I’ve see a few foldable saws. I haven’t seen the Klein tools saw though. I’ll have to check it out. Thanks for the heads up👍
What s the price??????