The burner is not sending enough gas to the top,that part of turning is spoiled I would advise you to buy a new one with time it will not control the flow of gas completely
There two things on top of your burner may need cleaning bse of dirt or the lower part of your burner where gas passes through to the top part is spoiled and it's not sending enough preasure to reach the top that's why gas is passing through the four holes of the burner,when you try clean the top to open the holes and the same problem happens it means the lower part is spoiled buy anew burner,I wish you well
![ได้เวลา! พาน้องแฝดฉีดวัคซีนครบ 1 เดือน🫣 [cc] แดนแพทตี้ SS2 | EP.52 |](http://i.ytimg.com/vi/IzeLtaXBLNE/mqdefault.jpg)
I am trying to fix the other part to the cylinder but gas is coming out... should i continue to fix it?
Yes you continue it will stop
Can any cylinder be used with a burner or there are specific ones for burners?
All 6kg and 3kg uses burner except for shell order that uses only a regulator but also shell has that cylinder that uses burner
Hi How do i reduce the heat flame ,mine cant steam rice on low heat
The problem is ur burner it has over stayed u need to buy a new one
Mine starts well after it switch its self off
That part of tuning is loose you need to buy a new burner
What is the importance of those four holes on the burner below
It allows gas to burn and not allow smoke
How can I clean the burner?
Use omo and steal to scrab it will be okay then put it to dry before use
Mine lights normally but after a few minutes it starts to produce a poping sound and goes of. What could be the problem on this
The burner is not sending enough gas to the top,that part of turning is spoiled I would advise you to buy a new one with time it will not control the flow of gas completely
@@davidomaje thanks
I have the stove like one your video
Thanks , David, yo good at your job ❤
Thanks alot for support
How long does it take to be used or to be empty cylinder
At least one and half months if u used it well
How much does it cost mr@@davidomaje
Only ugx 145k
Thankyou so much
Ur welcome
I want buy one how much
Starbex 6kg 145k
How can get one
We are located in kyanja and Entebbe Abaita ababiri
My gas stove is not working, do I need a new burner or what help me.
Wen a gas stove dirty or has oil it may not burn before buying use omo to wash it and leave it to dry if it fail then buy aburner
How much is 13kgs when am buying and when am refilling it
Buying 13kg 230k after refills is 105k
@@davidomaje ok thanks dear
AV tried to fix but inatoa gas what can I do
The valve for the cylinder may be defective some cylinders due factory error may cause that take it where you bought it from and they help you be safe
The fire from my gas set comes not from the top but the four bottom holes below where it should be coming from ...what to do about that
There two things on top of your burner may need cleaning bse of dirt or the lower part of your burner where gas passes through to the top part is spoiled and it's not sending enough preasure to reach the top that's why gas is passing through the four holes of the burner,when you try clean the top to open the holes and the same problem happens it means the lower part is spoiled buy anew burner,I wish you well
@@davidomaje thank you so much
Where are you located
Entebbe abaita opposite police and kyanja