Vielen Dank für das deutliche Video, das mir sehr geholfen hat. Im Spulengehäuse hatten sich Flusen angesammelt und verfestigt. Der Oberfaden wurde bei schnellerem Nähen behindert.
I am so glad I found this video!! Where can I find part number 401150 that is shown in the schematic? It is a tiny little washer, but the machine won't work without it!!! Thank you for any help you can provide!!!
Many thanks for your video. I would have just blowed away all that dust I saw there and also I would have put some oil but I guess that is in another of your videos. Many thanks again.
My lotus is unusable, cotton jammed under bobbin case. I managed to clear it easily after watching your wonderful vid but it immediately jams again with just one hand turn of the wheel, so I guess it’s something more serious.
Thanks for the video. After removing the 2 screws I still couldn't lift out the bobbin case. It's jammed after it pulled a thick fiber of the material I was sewing. Help please. Thanks
Hi! I have an Elna TX Electronic machine, but as far as I see, it is basically the same as this one. The horizontal spring next to the bobbin case came off yesterday. Could you please help me how to put it back? Where the two ends of the spring go? Thank you in advance! :)
Followed your instructions for loosening the two correct screws to release the bobbin case on my Elna ZZ. The bobbin case wiggles just a bit but cannot be removed. The screws are loose and twirl in place. Do you think the screws are somehow stripped? What else could be holding the bobbin case in place?
I am trying to replace the rotary hook cover on my Elna TX Electronic - the cover plate. I can see you doing it very easily in the video at 3.45, but can't quite make out what you are saying - something like "You might have to move the feet up... to move it down" How do I get those feet to move out of the way, please!
Thank you so much - my 50 year old machine is purring again - happy girl here👌👍
Thank you ❤ Machine is back to purring after removing 5 very small lumps of oily dust. Amazing how something so small can stop a machine from working.
Wow you saved Xmas. My machine just stopped in the middle of my daughters Christmas dress. You have saved us all. Merry Christmas and thank you
I’ve just picked up a Type 58 TSP, and your brilliant video has helped me sort out lower tension problems. Many many thanks for producing this.
I have an Elna sincev80s and love it. I'm quilter ND must clean it frequently. So grateful for this video. Thanks and God bless!
Just used this video to free up my wife's machine. Thanks for a very clear explanation!
You are a dead-set legend. I had no idea. Cheers for the rescue.
Thank you beautifully explained & i cleaned out the bobbin case that had cotton caught in it. Saved me $’s much appreciated 😃
Thanks a million! I have an Elna SU and your video was priceless. So happy it works great now.
Thank you so much! My older SU model is well used, and I really needed this tutorial. You saved me time and money. I am so grateful!!
I have an Elna Jubilee that had the crankcase jammed. This worked! Thank you!
Thank you - just inherited my granny elna and now after sorting this is works perfectly
Thank you! Exactly the problem! I was afraid to take it apart til I saw your video cheers and thank you for this!
Thanks for the video. This helped me diagnose an issue with an old Elna TX Electric. 👍
Thank goodness I found this,now need to try it
Very clear and helpful. Enabled me to unjam the machine in a few minutes.
oh my gosh thank you so much for this video. your machine is slightly different but I finally figured out where the jamb was
Thanks very much for sharing, I needed to see how to do this.
I am so happy to have found this video.... problem solved ! THANKS🌺🙏
Vielen Dank für das deutliche Video, das mir sehr geholfen hat. Im Spulengehäuse hatten sich Flusen angesammelt und verfestigt. Der Oberfaden wurde bei schnellerem Nähen behindert.
Thanks for posting this clear video. Helped me a lot!
I am so glad I found this video!! Where can I find part number 401150 that is shown in the schematic? It is a tiny little washer, but the machine won't work without it!!! Thank you for any help you can provide!!!
Many thanks for your video. I would have just blowed away all that dust I saw there and also I would have put some oil but I guess that is in another of your videos. Many thanks again.
Thanks for showing this. I was looking for this help so long.🦉
My lotus is unusable, cotton jammed under bobbin case. I managed to clear it easily after watching your wonderful vid but it immediately jams again with just one hand turn of the wheel, so I guess it’s something more serious.
l love you......thank you so much.... eso era lo que queria saber
saludos desde Chile 🇨🇱
Thanks! Just what I needed!
neddle clamp replacement vedio pls ur all vedio are helpful
Superbe....works also for Elna air electronic SU
Thanks for the helpful information!
... very helpful!! Could repair the machine within 5 minutes!! Many thanks!!!!
Very helpful, thank you.
Great thank you for sharing. My lotus has stopped zig zaging and advice would be appreciated x
Thanks for the video. After removing the 2 screws I still couldn't lift out the bobbin case. It's jammed after it pulled a thick fiber of the material I was sewing. Help please. Thanks
Hi! I have an Elna TX Electronic machine, but as far as I see, it is basically the same as this one. The horizontal spring next to the bobbin case came off yesterday. Could you please help me how to put it back? Where the two ends of the spring go? Thank you in advance! :)
my bobbin case fell apart when pulling a thread out Help!
I removed a different screw and now it’s a mess 😩😩😩 Do you have a video to show how to put back everything in the right place?
Followed your instructions for loosening the two correct screws to release the bobbin case on my Elna ZZ. The bobbin case wiggles just a bit but cannot be removed. The screws are loose and twirl in place. Do you think the screws are somehow stripped? What else could be holding the bobbin case in place?
Ah, finally pried it off! Thanks so much for saving me a repair bill!
I am trying to replace the rotary hook cover on my Elna TX Electronic - the cover plate.
I can see you doing it very easily in the video at 3.45, but can't quite make out what you are saying - something like "You might have to move the feet up... to move it down"
How do I get those feet to move out of the way, please!
Have you tried to turn the hand wheel so the feed dog move down and more towards you?
Thank you. I finally managed to move it somehow, by turning the hand wheel and jiggling everything.
Thanks for your help @@AbsoluteSewing
Does your bobbin case move around at all after you've tightened the two screws?
Super, Merci beaucoup!
Very helpful, Many thank sur
Woooo thanks a lot. So happy
Thank you so much!
Cómo ajustar el cangrejo de la Lotus SP
Cum se scoate ata de la suveica
Thank you! Do you know the diameter of the bobbin? Thank you!
.79 in or 20.1 mm top and botton
Really helpful video, although it would have been good to see how to thread the bobbin again afterwards.
***** Have a look at support.sewingnz.com/threading-the-elna-lotus-sp/ and you can find all the information you need and more.