Imagine at Steve’s age he just out manned his own father , Steve with a pony pusher . 4 banger brothers keep your head down 1:49 shanes worst nightmare a 8 cylinder supercharger damn he gunna be having nightmares about LITTLE BIG BRO😂😂😂 enjoy guys have fun
Very smart on your part start doing ford stuff just like cleetus and youll bring all the ford guys watching. Im a ford guy and I started watching you to learn about the Honda stuff.
Very little damage. Very rebuildable. Both heads won't be a big deal. The one will need a little massaging in around the valves. New seats, valves, springs and guides. The caps can be replaced but will need to be checked for alignment. Find all missing ones if you can. Good luck guys!
coyote powered civic rear wheel drive lol hose motors are beasts!!! A lot of people don't know fords been using that design for a LONG time!! think it was in a tank they first used dual over head cam motor in the 40's, then in racing, 427 cammer mustang in 69 or 70 I think but could be wrong, and they jus keep updating it. Anyway its cool seeing you guys jump into a different area of engines.
That's going to be a bad ass engine for Skiddy. I know it wasn't said but that look kind of gave it away to me. Going to be bad ass either way. You cant progress thru life unless your learning. Learning new skills is always handy
I love you guys all love, But full transparency - I'll be watching every second if you focus on a new build - AWD Shoot outs? Should HIT up Manuel at Midnight, he's got some new turbo kits and goodies. Colab and get into the no prep racing! My 10 cents, keen too see some crazy shit
2:58 im calling a broke valve, busted piston and needs at least 1 sleeve and its a Gen1 too. That blower looks fkn awesome on there, intakes are easy to make though. Edit..9:02 that rod is trashed now after Jamie pushed on the cracked cap side of the rod, they arent cut in half they are actually sheared off for perfect alignment then machined. Once he pushed with the ratchet on the rod and slipped it smoothed those rough edges and alignment is impossible.
Mine used to be, My grandma was an automotive engineer and used to race, my mom used to street race and sell cars..and us kids used to just hang out outside wrenching on whatever the hell we dragged home right in the driveway but that's frowned on these days, I hope once I can move and buy a home with a garage we can make it happen again...I miss it.
I’m telling you. Go to your families property. Snatch up one of those 50s cars that has the most potential. And make yourself a legit burnout car. Use That 5.0 & the roots supercharger.
why when a whipple goes right on it have one in our shop in a falon much love from california im the guy with the rwd civic please shout me out we wanna come race where in cali
Lunds ur best bet at tuning anything coyote and ur about to find out why coyotes aren't for everyone im afraid. Heard the timings a absolutely pain....
I'm curious how you're going to repair that cylinder wall. That thing looks pretty blown. Maybe you can get your money back by parting out the crank and other non-damaged parts?
Mon idée d'une escapade romantique implique désormais de réserver une chambre d'hôtel avec des rideaux occultants et un grand lit. Ah, le luxe d'un sommeil ininterrompu😘
@@robertadamsmetaldetecting6324actually it's cast block and heads.... Newest motion race works video shows the motor out of the car with him clearly stating it's cast
Il mio compagno ha cercato di sorprendermi con la colazione a letto. Era una cosa dolce, finché non ho rovesciato per sbaglio il succo d'arancia sulle lenzuola. Non c'è niente di meglio di una situazione appiccicosa per iniziare la mattina🍭
Brent is it not a blast to go from teaching your kids! To them teaching you new things!!!!! It’s AWESOME!!!!
Brent, Jamie, and boys, y'all rock! Those Coyotes are badass. Peace 🤘 🍻 💨
Love nothing more then to watch a new pfi episode at night relaxing in bed🤘🤘🤘
Hell yeah. Should be a good core for some new sleeves.
Much love to the PFI family from Texas. Keep grindin' brothers!
Unbelievable little engines they can definitely make some power with boost..
Imagine at Steve’s age he just out manned his own father , Steve with a pony pusher . 4 banger brothers keep your head down 1:49 shanes worst nightmare a 8 cylinder supercharger damn he gunna be having nightmares about LITTLE BIG BRO😂😂😂 enjoy guys have fun
Brent you are one of the raddest dads i know of .... Raisinig those kidz ..... Great work
Yessss!!! Some good.old Ford v8 content, a d its a good one, too! Love them coyotes!
Yeeeeeesss!!! Let’s gooo…!!❤🎉
Very smart on your part start doing ford stuff just like cleetus and youll bring all the ford guys watching. Im a ford guy and I started watching you to learn about the Honda stuff.
Very little damage. Very rebuildable. Both heads won't be a big deal. The one will need a little massaging in around the valves. New seats, valves, springs and guides. The caps can be replaced but will need to be checked for alignment. Find all missing ones if you can. Good luck guys!
Honda guys tearing down a blown up coyote , now that's something you don't see! Go Steve Go
Hell yea awesome addition to the shop!
Quad cam V8 Nice!
That's a lotta damage! 😛
I love a dam good deal! Cant wait to hear it.
Time to get Sho’nuff back on the track! You are overdue for a great day with that car.
That's so awesome guys! I'm so excited to see you work with your sons, It's amazing! God bless y'all!
Heck yeah! Sure is gonna be a rad build! Whatever they decide to put it in 😊
You guys rock. You keep making videos and we will kept watching them.....
Love it. Keep em coming!
coyote powered civic rear wheel drive lol hose motors are beasts!!! A lot of people don't know fords been using that design for a LONG time!! think it was in a tank they first used dual over head cam motor in the 40's, then in racing, 427 cammer mustang in 69 or 70 I think but could be wrong, and they jus keep updating it. Anyway its cool seeing you guys jump into a different area of engines.
Blown Coyote in Skiddy?!!!
I ❤ PFI SPEED!!
Hell yeah 5.0
yes please i would love to see a 5.0 build on this channel
if you use a Holley intake you can get a adapter kit from SWS to put a blower on it
Can’t wait for the future coyote content 🎉🎉
I hope the new looking cam matches the other cams. :p Cool project!
That's going to be a bad ass engine for Skiddy. I know it wasn't said but that look kind of gave it away to me. Going to be bad ass either way. You cant progress thru life unless your learning. Learning new skills is always handy
Thank you for your quality content! Your videos always delight me with interesting topics and high level of performance.♥️♦️🌞
Lol. You lured me in for sure!
I love you guys all love, But full transparency - I'll be watching every second if you focus on a new build - AWD Shoot outs? Should HIT up Manuel at Midnight, he's got some new turbo kits and goodies. Colab and get into the no prep racing! My 10 cents, keen too see some crazy shit
I’ve seen those cam lobes spin because they’re pressed on, at least on the one I disassembled.
Hell yeah brother ! Been waiting for one of these builds can you do a build sheet build cost
Let’s go !!! 😜👍🇦🇺
Let's see it in the Cole truck!
Make sure you pin the crankshaft you’ll spin the harmonic balancer!
Skiddy 2.0
2:58 im calling a broke valve, busted piston and needs at least 1 sleeve and its a Gen1 too. That blower looks fkn awesome on there, intakes are easy to make though.
Edit..9:02 that rod is trashed now after Jamie pushed on the cracked cap side of the rod, they arent cut in half they are actually sheared off for perfect alignment then machined. Once he pushed with the ratchet on the rod and slipped it smoothed those rough edges and alignment is impossible.
Awesome coyote content
The coyote is a very sensible base for y'all's initian into V8s. That or a Toyota UZ V8
Hell yes!!!
Families like this were once the norm.
Mine used to be, My grandma was an automotive engineer and used to race, my mom used to street race and sell cars..and us kids used to just hang out outside wrenching on whatever the hell we dragged home right in the driveway but that's frowned on these days, I hope once I can move and buy a home with a garage we can make it happen again...I miss it.
I know! It's awesome to watch 'em hang out and work together!!
Put it on bully😮!!!!
Let's Go!!
That's going in Steven's civic. Wouldn't that be something? 2000hp 🤙🏼
😂
Brent if RAD was an engine that's how I would picture it!
Hell yeah yall
Tell gordie to bring himself back to the shop he needs to show that beautiful little face
Maaan!! I’d love to see that V8 in a rear wheel drive Civic! Wha cha say Steven…?😂💪🏼🦅💨
Jb weld and some sand paper and run it !! Lol 😂
If its the 5.0 coyote engine its a non interference engine. If its the 5.4 4.6 triton then its an interference engine.
Hey i saw on Facebook your at minimum are moving the awd dyno. What's up there.
Best engine of all time for sure
Looking forward to seeing the build
I’m telling you. Go to your families property. Snatch up one of those 50s cars that has the most potential. And make yourself a legit burnout car. Use That 5.0 & the roots supercharger.
That poor coyote isn't howling at the moon no more
Put it in the cole truck. It would be a nasty roll race truck.
Yessser 🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉
This fool's running a Honda two thooousand
Everyone to their own poison. 5:43
ford power
Would be sick to see this in shonuff👀
You can make 3,000 horsepower with that engine if you want Brent!
Well, plan worked. It lowered me in. lol
what happened to the bully civic
First On Race Day!!
why when a whipple goes right on it have one in our shop in a falon much love from california im the guy with the rwd civic please shout me out we wanna come race where in cali
Steven is a mad lad, would love to see a big ol blower on it as well!
If you do build it get a good oil pump
❤❤❤
Lunds ur best bet at tuning anything coyote and ur about to find out why coyotes aren't for everyone im afraid. Heard the timings a absolutely pain....
Better take it to tkm or fast forward race engines
I'm curious how you're going to repair that cylinder wall. That thing looks pretty blown. Maybe you can get your money back by parting out the crank and other non-damaged parts?
I have no clue about about engine repairs, for the hole in the cylinder I would pack in some weld bore it smooth and sleve it
They will they will have it bored out and put a new sleeve in it that's how you fix it
Its more simple of a fix then youd think. Look up how to sleeve a coyote ford engine. With the right machiest, tooling etc it"ll buff right out lol.
Yeah just like everyone else said. With it having to be sleeved anyways it's not to big of a deal
Pfi 😢😢😢😢 for real no level ..poor guys.
I got no idea who it is tho what he already got the k series back in there
✌️
put it in a rwd tube chassis civic brother if me you and kyle paint them all black where have 3 honda civics but ej8s
That 5.slow that makes power that a 4 banger needs a turbo to make and still won't have torque
Gen 1 I'm pretty sure..
Yea actually give the s2000 a RELIABLE 2000 horsepower!!!
Civic hatch with a coyote and big tire pleeeeeeeease
2000 HP What to do with it?
Simple. Re-power the Honda 600. Wait, can I take that idea back?
5.0 with blower th-cam.com/video/r5aUQPzZIIw/w-d-xo.htmlsi=prXz9xQfB_y11g5n
5.4 and the 4.6 are prone to kicking the rocker out on that back bank on the right side. Did that on my ol mans f250 with the 5.4 triton
This is neither of those tho lol
Mon idée d'une escapade romantique implique désormais de réserver une chambre d'hôtel avec des rideaux occultants et un grand lit. Ah, le luxe d'un sommeil ininterrompu😘
Your channel is a real find for everyone who appreciates quality and informative content. Keep up the good work!🌟🍕🔺
Slow compared to what.
Is he transitioning?
Take a look at Snot Rocket and you won’t call it slow anymore
There is a huge difference between a fully built billet engine and this...
Relax big boy
@@robertadamsmetaldetecting6324actually it's cast block and heads.... Newest motion race works video shows the motor out of the car with him clearly stating it's cast
@@robertadamsmetaldetecting6324snot rocket is not a billet engine either, its a Predator block with sleeves and GT 350 heads
@@aarontaylor9805people assume way too much or just regurgitate what somebody else says
Brent it's been years since I heard 5-point slow! And you're damn right!
Been faster than anything Jamie’s ever ran🤷🏼♂️
I just clip and paste the same comment, sweet another project to start and never finish.
Gen 1 anchor.
Il mio compagno ha cercato di sorprendermi con la colazione a letto. Era una cosa dolce, finché non ho rovesciato per sbaglio il succo d'arancia sulle lenzuola. Non c'è niente di meglio di una situazione appiccicosa per iniziare la mattina🍭