Winners of the giveaway are Tomasz Jagusz L'amateur d'électronique John2009R Congratulations! Patroen winners have also been drawn so this giveaway is now closed.
I really love how you show the code in close-ups so clearly! I wish everyone would do that. Thank you! #giveaway black (but I'm not picky any color would be fantastic)
Nice video! It's very common go hike at places where we don't have signal coverage. Would be nice a 2.0 version of this project where we can store data on a sd card or even on eproom.
Well much to my good wife of 48 years dismay, I went ahead and ordered the parts to build this unit. That was back on the last week of April. Now I have the ESP8266 (cute little bugger!) and the sensor (funny bigger then it's cousin for large use) but the screen is listed as en-route to the USA! Perhaps they shipped her via the proverbial "slow boat from China!" Ah well, today I decided to try and use a different display that I have instead, see if I can make that work. After all I will need something a bit larger to be able to see it on my dash with my 67 year old eyes looking through eye glasses that make a coke bottle look thin.
Guess I answered my own query, I took a tiny oled that was i2c, and a BMP180 sensor which is i2c, hooked them up to a WeMos D1 EPS8266/Arduino Look-a-like, loaded your script and I have a working altimeter, which is what I wanted for the dash of our Motor Home so I know about where we are when crossing the mountains in Wyoming, Colorado, New Mexico and Arizona, where we spend our winters searching for the 72 (degrees). This will be useful, however I am going to have to figure out a better display, my 67 year old eyes have a hard time trying to see that tiny print on the 0.96 OLED screen, even though it is bright and so very sharp, as OLEDS tend to be. Maybe I will try and get a larger LCD screen to work in it's place, perhaps a 16X4 or something like that, I do have a nice 128X64 blue/white screen that could perhaps make a nice display if I can figure out how to hook her up to an ESP8266 or perhaps an ESP32 so I can use some of the blue-tooth functionality as well.
Would GPS be more precise for altitude? Perhaps an interview improvement could include a gps & atmospheric pressure sensor data logger? Nice video. Thanks
OK, I have the same hardware, I'm using the same version of Arduino. I've added all the libraries and added the ESP8266 board in board manager. I've picked every single esp8266 board install but still cannot compile! ARRRRRRGH!!! Sorry, had to do that. Every single board only say's "Error compiling for board...(fill in any esp8266 board here)".
Sorry if my question kinda silly. If there isn't connection(I assume you need internet connection), is the temperatur/pressure/altitude still shown ? Is the connection only for logging purpose ? Thanks
Not sure if you would be interested, but ... How hard would it be to also add GPS to this? I drive a lot and would like to track my location and altitude. I already have an Arduino UNO with an SD shield. Just asking?
Hi, please help. When I compile your code I get the following error codes, Arduino: 1.6.9 (Windows 10), Board: "WeMos D1 R1, 80 MHz, 4M (1M SPIFFS), v2 Lower Memory, Disabled, None, Only Sketch, 921600" WARNING: Spurious .github folder in 'Adafruit BMP280 Library' library WARNING: Spurious .github folder in 'DHT sensor library' library C:\Users\Richard\Documents\Arduino\libraries\Barometer-master\Code\Barometer\Barometer.ino: In function 'void loop()': Barometer:92: error: 'showValues' was not declared in this scope showValues(t, p, a); ^ Barometer:94: error: 'mqttLog' was not declared in this scope mqttLog(t, p, a); ^ exit status 1 'showValues' was not declared in this scope This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences.
#giveaway the color are not the most important thing here so you can choose one for me. I am very excited about the thing that you do TH-cam as full time now. The videos are great! Keep going, and good luck to every body.
#giveaway blue, but happy with any! Always loved your videos and style - you got me into printing PCBs at home using sodium persulphate etc! Glad you're doing this full time and I'll be supporting on patreon soon!
Hi ich bin aus der Schweiz, aber damit alle es verstehen auf Englisch: You make great, educational content and you're still funny and enjoyable. Keep up the great videos, you're a motivation-bomb! #Giveaway Red
#giveaway orange. Man, its gonna be so cool to have your videos regularly (I will maybe find the inspiration to finally complete some of my ongoing projects ;). Vielen dank. Tschüss...
Could you make a video or explain somehow, how to integrate custom animations in your HomeAutomation Sketch via the Neopixel Library? Stört es dich eigentlich, wenn man deutsche Kommis schreibt?
Cool; wish I had found in time for the giveaway, ah well, my luck, I would never have been drawn anyhow. I am currently on a negative funds order, so can't afford to buy any of these parts. That said, I do have older versions of the hardware, I wonder if a fellow could simply wire up a larger version of this unit and make it all work with your script?
(Black or Clear if I win the #giveaway please) --- Congrats on the big move! Funny and informative as always. (0.29 "OK..." lol). But... If I get one, does that mean I have to cut a hole through my desk to run the usb cable through? Seriously tho, I get that you wanted to just stack the shields on the wemos with as little hassle as possible, but it would be really nice if there were an easy way to have the cable come in from the back (the side opposite the screen). Either that or "legs" below the box so the usb cable can bend back. Always great videos!
You could, it draws 0.1-0.2Amps. A 0.4mAh lipo will last 2h. That might be not enough in some cases. If you make the case bigger a 18650 could be sufficient
On the one that I built out of older parts, I needed to subtract 300 feet to get her to read very near our present altitude of 2567 feet, going by my Garmin SatNav hand held unit.
yes.. kabylake helps encoding, but it's a trade off between mobility and power. However, I also use a razer core with 1060gtx as docking to have an additional screen and more connections. A simple dongle usb-c to hdmi instead of the noisy razer when I record voice.
bitluni's lab oh that's nice, I never thought of that and went and purchased the xps 15 9560 and now I understand how difficult it is to carry a 2kg load with you. The reason for me to buy that was for editing videos for my upcoming TH-cam channel , but yeah thanks a lot for the reply
Nice idea.. have to ask the suppliers if they provide such a filament to me... for free. However 24k gold melting point is ridiculous. we have to pimp the hot end somehow
#giveaway green seems nice ;) BTW the idea of having to be connected to internet all the time during hiking seems a bit odd for me :D have you thought about logging the values offline? and maybe using the ESP as an Access Point to display the graphs :D Anyway, great project, greeting from Poland :))
Have some sd card shields here around.. ...guess wie have to make another version ;) btw. did you recognize a little bit of a polish accent from me? It's funny.. I'm born in Poland, living in ger for almost 30 years without an accent.. except when I speak English :D
You won one logger... please send me your address where to ship the device to my email address bitluni@bitluni.net . no worries it won't be shown anywhere
Winners of the giveaway are
Tomasz Jagusz
L'amateur d'électronique
John2009R
Congratulations! Patroen winners have also been drawn so this giveaway is now closed.
Awesome video with great fun. What a commitment to climb up a 2000m mountain just to test the sensor. From the dawn of mankind: Impressive.
das ging nur mit der kraft der gedanken ;)
AKIRA fotografie and he had to climb it up twice xD. He had to setup the camera
Nice pace, fitting music, great story telling :) and the project is awesome!
Awesome that you can do it full time, and beautiful nature you got there.
Really enjoy your videos. Keep up the great work!
I really love how you show the code in close-ups so clearly! I wish everyone would do that. Thank you! #giveaway black (but I'm not picky any color would be fantastic)
I wonder how good this would work in an RC airplane or quadcopter?
Congratulations on becoming a full time TH-camr!
thanks!
Nice video! It's very common go hike at places where we don't have signal coverage. Would be nice a 2.0 version of this project where we can store data on a sd card or even on eproom.
Well much to my good wife of 48 years dismay, I went ahead and ordered the parts to build this unit. That was back on the last week of April. Now I have the ESP8266 (cute little bugger!) and the sensor (funny bigger then it's cousin for large use) but the screen is listed as en-route to the USA! Perhaps they shipped her via the proverbial "slow boat from China!" Ah well, today I decided to try and use a different display that I have instead, see if I can make that work. After all I will need something a bit larger to be able to see it on my dash with my 67 year old eyes looking through eye glasses that make a coke bottle look thin.
Awesome... Great Video and Project 🤓 Looking forward for "More'er" Videos 😉
green, love your work
Guess I answered my own query, I took a tiny oled that was i2c, and a BMP180 sensor which is i2c, hooked them up to a WeMos D1 EPS8266/Arduino Look-a-like, loaded your script and I have a working altimeter, which is what I wanted for the dash of our Motor Home so I know about where we are when crossing the mountains in Wyoming, Colorado, New Mexico and Arizona, where we spend our winters searching for the 72 (degrees). This will be useful, however I am going to have to figure out a better display, my 67 year old eyes have a hard time trying to see that tiny print on the 0.96 OLED screen, even though it is bright and so very sharp, as OLEDS tend to be. Maybe I will try and get a larger LCD screen to work in it's place, perhaps a 16X4 or something like that, I do have a nice 128X64 blue/white screen that could perhaps make a nice display if I can figure out how to hook her up to an ESP8266 or perhaps an ESP32 so I can use some of the blue-tooth functionality as well.
Can i get file stl bruh? I wanna print to my printer3D
The models are on the github
Would GPS be more precise for altitude? Perhaps an interview improvement could include a gps & atmospheric pressure sensor data logger? Nice video. Thanks
gps ~25m variation in altitude we will do it in future
Haha add gps module, gyro GY-521, buzzer, plus evt. sd writter, some sketch and you've perfectly working vario for paragliding :D. Thanks :P
Wonderful view. What places? Where are you? Greetings from Colombia South America
11/10 video!
You solder good. Any tutorial?
OK, I have the same hardware, I'm using the same version of Arduino. I've added all the libraries and added the ESP8266 board in board manager. I've picked every single esp8266 board install but still cannot compile! ARRRRRRGH!!! Sorry, had to do that. Every single board only say's "Error compiling for board...(fill in any esp8266 board here)".
Heyyyy videos every week
Please teach about MQTT
Find deine Videos echt klasse mit deinem Humor :) Sah aus als würdest du aus Bayern kommen, da bin ich auch ab und an ;)
Sorry if my question kinda silly.
If there isn't connection(I assume you need internet connection), is the temperatur/pressure/altitude still shown ?
Is the connection only for logging purpose ?
Thanks
Well job your are doing excellent .....
I wondering if I can use this for my flying wing to find thermals will soaring
what code changes will I have to make if I want to make it into an online altimeter and not a logger
How does data gets transferred to adafruit website or server? Can please explain to me.URGENT
Nice! How much flashing memory is available on these Esp8266 ? I am BFROBOT Beetle instead. Power consumption is also a consideration.
If it's a bitluni's video out notification, then you will see ESP8266 for sure, you are an ESPecialist. #giveaway
Not sure if you would be interested, but ... How hard would it be to also add GPS to this? I drive a lot and would like to track my location and altitude. I already have an Arduino UNO with an SD shield. Just asking?
Can we use this for checking maximum altitude of DIY rocket.
Hi, please help. When I compile your code I get the following error codes,
Arduino: 1.6.9 (Windows 10), Board: "WeMos D1 R1, 80 MHz, 4M (1M SPIFFS), v2 Lower Memory, Disabled, None, Only Sketch, 921600"
WARNING: Spurious .github folder in 'Adafruit BMP280 Library' library
WARNING: Spurious .github folder in 'DHT sensor library' library
C:\Users\Richard\Documents\Arduino\libraries\Barometer-master\Code\Barometer\Barometer.ino: In function 'void loop()':
Barometer:92: error: 'showValues' was not declared in this scope
showValues(t, p, a);
^
Barometer:94: error: 'mqttLog' was not declared in this scope
mqttLog(t, p, a);
^
exit status 1
'showValues' was not declared in this scope
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
Awesome video, thx
#giveaway (any color) Wow you are still alive welcome back....
Can I buy one complete???
#GiveAway Green Would be Awesome!!!
#giveaway Green! Wow! The production values on this video were superb! Really glad I subscribed! Love the project! I wish I had a 3d printer now.
#giveaway the color are not the most important thing here so you can choose one for me. I am very excited about the thing that you do TH-cam as full time now. The videos are great! Keep going, and good luck to every body.
Wow, weekly now! I just recently found you and subscribed after watching everything, added the bell this time. #giveaway yellow rules!
#giveaway blue, but happy with any!
Always loved your videos and style - you got me into printing PCBs at home using sodium persulphate etc! Glad you're doing this full time and I'll be supporting on patreon soon!
Hi ich bin aus der Schweiz, aber damit alle es verstehen auf Englisch:
You make great, educational content and you're still funny and enjoyable. Keep up the great videos, you're a motivation-bomb!
#Giveaway Red
Hi there, have you tried microPython for esp? I think you would like it, please make another video about it. :)
Did you remember to change your API key this time? ;)
If you are out of WiFi range, does it buffer or back log the information to send to mqtt server after WiFi is available again?
not yet... currently I connect it to a the mobile hot spot of my phone.
I'll do logging to sd for the gps project
#giveaway Green! Awesome.. Love the fact you use blender for your 3d..
Do I have a chance next time?
#giveaway orange. Man, its gonna be so cool to have your videos regularly (I will maybe find the inspiration to finally complete some of my ongoing projects ;). Vielen dank. Tschüss...
Thank u very much...😙😍
can you do a video for bme280 or similar?
Awesome!!
I am at 30m over sea level and after three days my wemos shows -7m
Could you make a video or explain somehow, how to integrate custom animations in your HomeAutomation Sketch via the Neopixel Library?
Stört es dich eigentlich, wenn man deutsche Kommis schreibt?
I replied on you comment on github.. no worries. I read them now and then
Orange plastic always looks good to me for some reason.
Cool; wish I had found in time for the giveaway, ah well, my luck, I would never have been drawn anyhow. I am currently on a negative funds order, so can't afford to buy any of these parts. That said, I do have older versions of the hardware, I wonder if a fellow could simply wire up a larger version of this unit and make it all work with your script?
#giveaway Great video! Have you done anything with the bme280? Any color will be fine.
(Black or Clear if I win the #giveaway please) --- Congrats on the big move! Funny and informative as always. (0.29 "OK..." lol). But... If I get one, does that mean I have to cut a hole through my desk to run the usb cable through? Seriously tho, I get that you wanted to just stack the shields on the wemos with as little hassle as possible, but it would be really nice if there were an easy way to have the cable come in from the back (the side opposite the screen). Either that or "legs" below the box so the usb cable can bend back. Always great videos!
another possibility is to make the code render up side down.. anyone can fork my code? :D
good point. Or sideways.
green or black
#giveaway Find your videos fascinating and like the humour too. Glad you're posting on here more regularly now. Like 'blue' btw.
Good news you start your every week a new video. Succes. #giveway green
сделай видео с природой гор с этого ракурса я понимаю это не тематика твоего канала но всё же так красиво
#giveaway Black. Keep those videos rolling in!
#giveaway Blue. Cool project! Cold you not use small lipo to power it?
You could, it draws 0.1-0.2Amps. A 0.4mAh lipo will last 2h. That might be not enough in some cases. If you make the case bigger a 18650 could be sufficient
#giveaway red, your idea is so cool and good that you'll be doing weekly videos
#giveaway gold. I'm building my own sensors for my house using Wemos D1 Minis!
thx u sir
#giveaway blue please! Love the videos, i used your video about controlling cheap rf switches for my home automation! It works great
#giveaway Excellent videos. Very informative and lots of fun. Keep up the good work. Any color is fine.
I think since altitude is calculated partially by pressure it's always going out a few degrees. #giveaway green :)
On the one that I built out of older parts, I needed to subtract 300 feet to get her to read very near our present altitude of 2567 feet, going by my Garmin SatNav hand held unit.
#giveaway blue
And was curious to know , do you edit your videos on the xps13 ?
yes.. kabylake helps encoding, but it's a trade off between mobility and power. However, I also use a razer core with 1060gtx as docking to have an additional screen and more connections. A simple dongle usb-c to hdmi instead of the noisy razer when I record voice.
bitluni's lab oh that's nice, I never thought of that and went and purchased the xps 15 9560 and now I understand how difficult it is to carry a 2kg load with you. The reason for me to buy that was for editing videos for my upcoming TH-cam channel , but yeah thanks a lot for the reply
#giveaway black all the way, I found this awesome device very interesting to work it out with my senior project :)
# Any color.
#giveaway green
#giveaway pink, because.. why not :p and that's some serious hill climbing skills ;)
Cool
#giveaway green nice work. Been looking for a Wemos case so will check out your design. Regards
#giveaway Green! Lets go outdoors and see some green :)
Nice Backdrop where are the mountains #giveaway Blue..
Did you record your hike alone? #giveaway....yellow
#giveaway 24k Gold! Just kidding! Random colour is fine for me or blue or platinum...
Good luck with the films!
Nice idea.. have to ask the suppliers if they provide such a filament to me... for free. However 24k gold melting point is ridiculous. we have to pimp the hot end somehow
#giveaway any color. Love your WeMos videos.
#giveaway blue! Great video with a nice bit of comedic value too, :-)
Good luck on your fulltime youtube job. Inspiring videos! #giveaway black
#giveaway any colour will do.
Love your channel:-)
#giveaway Golden video, cool tutorial. (color black if possible)
#giveaway interesting video and a somewhat unusual approach than most other TH-cam videos. I like it. Looking forward to see your next video.
#giveaway green seems nice ;) BTW the idea of having to be connected to internet all the time during hiking seems a bit odd for me :D have you thought about logging the values offline? and maybe using the ESP as an Access Point to display the graphs :D
Anyway, great project, greeting from Poland :))
Have some sd card shields here around.. ...guess wie have to make another version ;)
btw. did you recognize a little bit of a polish accent from me? It's funny.. I'm born in Poland, living in ger for almost 30 years without an accent.. except when I speak English :D
bitluni's lab I took it for German accent :)) but it's not bad anyway ;)
#giveaway blue colour. Great work !!! It is really great entertaining and educating videos that you are making, keep it up!!!
#giveaway: white;
interesting the way you make your videos.
#giveaway awesome, where are those places?
#giveaway orange color. Good video I 'll do a similar project.
#giveaway royalblue. That OH YEAAAAAH ;) while oled screen protector removal
#giveaway Black.. Nice and Clean Build!
#giveaway blue. Awesome news. I learned a lot from Your channel and I'm still learning. Keep up the good work :)
You won one logger... please send me your address where to ship the device to my email address bitluni@bitluni.net . no worries it won't be shown anywhere
#giveaway green. Awesome project, as usual.
#giveaway orange
Congratulations for your great channel
#giveaway orange color. Awesome work :)
your altitude was off because you didn't take temperature into account, have you?
I have used the altitude calculated by the library..
I know and they don't compensate for that, it's only based on pressure, which is not correct
betrayal! It probably needs to solve a nonlinear equation. I'll fix it for the next logger :-)
#giveaway Any color
Awesome landscape
#giveaway any color. Nice project luni ;) Keep up the good work!