The cause of the AC electrocuting or short body

back again with johan technique
This time, Johan Teknik wants to review a little about the problems that cause the AC to shock or short body, whatever the causes are:
1. Grounding or Grounding is not installed
because the function of grounding is as a neutralizer of leakage current which will later flow to the ground or earth.
2. This leaky capacitor can also cause a short body or electrocution, which can be marked by the physical characteristics of the capacitor
a. the capacitor bloats and cracks and releases liquid
b. the capacitor melts.
3. It could also be caused by a compressor coil that is not good enough because the spool layer is peeling off
4. The problem with the cable is peeling and the skun is rusty
there's a way to fix it:
Note measuring how much the short body voltage or stun it, if it's still below 100 V, we can still trick it
1.Give additional ground to the outdoor unit
2. Change the position of the neutral and phase wires on the outdoor unit
3. on the indoor unit switch the position of the neutral and phase wires
4. remove the grounding cable attached to the indoor
good luck
greetings johan technique
description
description