How to Degrease A Screenprint Frame

Hello, such friends of You tube.
As they are, I hope they are very well and today they dye excellently.
In the previous video I explained to them how the bichromate emulsion works. I showed them how to mix
And its proportions before I teach you how to apply an emulsion is important to stress that no
There is a good emulsified if there is no previous degreasing of your screens. So today I'm going to show you a product that personally helps me a lot in the workshop at the time of emulsifying my screens.
Stay with me until the end of the video so you can learn to do it yourself.
Many of our fellow screen printers usually use liquid soap or industrial degreaser and I will not lie to you. We have also used it, but as we all know, there is always an adequate product for each task we carry out in our workshop.
So today I show you my specific degreaser for the fabric of our screen printing screens.
This product is from the brand seritec de Sánchez and commonly known as SERIPASTA ®
It is an alkaline stencil degreaser product. It is applied both to new and recovered tissues with the help of a soft brush on the meshes rubbing
Vigorously on both sides. Leave on for 5 minutes and rinse with
Abundant water. Removes natural and synthetic fats. It is recommended not to use tow.
Well friends hands-on work accompany me to degrease my screens as God intended.
Degreasing and rinsing block accompanied by shilora music.
Ok comrades are already completely dry our frames but I recommend that you take good care of any window that may contain particles of dust or fluff would be very good that the area intended for your frames is always very clean of course the recommendation is for all your workshop but minimum the area of ​​screens.
So quickly we degreased our screens and are ready to receive our emulsion and as the truth I do not want to bore them we will leave for the next video
Do not forget to subscribe and if you can, do not give up and share our video to continue uploading content to this your screen printing channel.
Be careful, we'll see each other until next time.

[@DOGGBROWN]

Gracias por el video... La seripasta se diluye para aplicar o se aplica como viene de fábrica?... Lo pregunto porque la composición de fabrica es espesa, pero cuando la aplicaste estaba más líquida... Saludos!

[@gustavodominguez8609]

muchas gracias !!

[@gustavopalaciosgonzalez579]

Grasias amigo muy interesante

[@ElRevzo20]

Men qué tipo de guantes ocupas? 🤔

[@ardilaimpresiones]

Buena explicación

[@adrianurizar]

Hola amigo. Una pregunta: por qué no es recomendable utilizar estopas cuando vamos a desengrasar?

[@musicaparadormir6020]

Por que dejan pelusas y particulas que contsminan la malla a la hora de emulsionar

[@efrenmesta9511]

Tendrás algún vídeo de cómo quitar el fantasma?

[@lucerogrijalvarafael2891]

Sirve para quitar pintura de agua que quedo seca?

[@musicaparadormir6020]

Claro pero ten paciencia tardara un poco más de lo normal

[@hanscristianabadlatorre5538]

Como puedo pegar la Malla a un Marco de Aluminio.
Saludos

[@musicaparadormir6020]

Pegamento epoxico es caro alrededor de 1400 los 2 compuestos

[@RealMadrid9992]

Es lo que dije, para limpiarlos +desengrasar) y me dijiste que no. Pues yo también soy la verga jaja ok no. Buen video. Haz usado la emulsión UDC? De chromaline?

[@musicaparadormir6020]

Pero dijiste que solo para pantallas nuevas 🤣 saludos hermano un abrazo y encuanto a la udc me encantaria dicen que son buenas

[@RealMadrid9992]

@@musicaparadormir6020 sí muy buenas no se cómo explicar, es diferente a la diazo y así, como que deja más fino el revelado. Suerte ya estoy suscrito y aquí andamos viendo consejos y tips