Welcome to skateing my dude! As someone whos been doing this most my life here is my best advice for you starting up... shin protectors! Dont worry about a helmet or knee pads, its you shins that are gonna get beaten to hell learning pop shuvs/varial kickflips ect, anything that swings the board around right at your shins. Every time you dont get the timing your gonna get shin smacked so hard. My shins are a wall of scars, most skaters are. So yeah thin plastic shin protectors when your learning those down.
This is super impressive. You could probably create a whole business on doing this for people. I would love to have some of my old boards be turned into fingerboards!
Hey you know how the new G16 has low concave and high kicks? Make a board that has almost no kicks and TONS of concave. Make 2 and send one to Mike himself
Idk why, but i wanna see a setup thats like this, but even more like the board, like same shape, same.grip, etc Basically making a fingerboard look exactly like a skateboard, just shrink down
@@ovoech3762 I basically wanna see someone make a fingerboard that has basically the same setup as a really skateboard, like sandpaper grip, same style wheels and trucks, etc
Salut, je suis français, j’adore tes vidéos, une dinguerie. Moi aussi je fais du finger skate mais en France y’a pas beaucoup de youtubeurs finger Board
you should diffidently do one of the zero skull graphics and a baker or Deathwish graphics also what is the name and type of tool you use for the countersinks because i just use a screwdriver and twist it twenty five times in each hole it works really well but takes a long time make my hand and wrist really sore. love the video
I'm a total beginner and just learned to do an ollie so correct me if I'm wrong. But isn't a Tech Deck made from plastic? So technically it's not a Tech Deck you made.... it's way better. Currently waiting for my package to upgrade my 32mm Nyjah Huston Tech Deck. I also have a hand full of 29mm Tech Decks but I don't like them.... not wide enough. But the 32mm Nyjah Huston Tech Deck is pretty nice. I like the 32mm, the graphics, the trucks, but that's it. That's why I ordered bearing wheels, 0,5mm foam griptape and actual bushings. Because this 32mm does come with rubber bushings but they are poor quality.
nice vid! how do you get the 5 ply wood you use for the mold? is it 5 ply? where do you get the mold and shaping mold too! you should make a video on making custom fingerboards and molding stuff
I hope you see my comment!! i make fingerboards under the name of BoneFish, and i was wandering if i could send you a board and you could rate it? i was on your discord a couple years ago too.
Welcome to skateing my dude! As someone whos been doing this most my life here is my best advice for you starting up... shin protectors! Dont worry about a helmet or knee pads, its you shins that are gonna get beaten to hell learning pop shuvs/varial kickflips ect, anything that swings the board around right at your shins. Every time you dont get the timing your gonna get shin smacked so hard. My shins are a wall of scars, most skaters are. So yeah thin plastic shin protectors when your learning those down.
ha nerd , just accept the pain like a real sigma male
@@DorianClark-k6mthis is a joke right
@@Isuckkk yes
@@DorianClark-k6m good
"You're Brain is you, everything else is an extension of you" -Andy Anderson... wear a helmet!
Now we need a small version finger bike of your bike
This is super impressive. You could probably create a whole business on doing this for people. I would love to have some of my old boards be turned into fingerboards!
Always love to see your notifications on tt love the vid man keep it up
Hey you know how the new G16 has low concave and high kicks? Make a board that has almost no kicks and TONS of concave. Make 2 and send one to Mike himself
It needs to happen
@@gaigeperez833 I agree
What are you 5 years old?
@@Mxnuel_2395 how💀
@@Mxnuel_2395 oh ye it’s my brothers account he cringe
Sick setup, Alex!
Dude, that's such a cool idea, keep up the banger videos🔥🔥🔥
love ur videos man
I’ve been here since the start of this young man’s epic journey, best video so far!
Putting Mod podge on after the paper work Really well 👌
Matte works well 7:52
That’s so clean
I love your videos man!! Mad Respect 🙏
BEST VID YET! keep up the content!
Here since 10k🎉
Now make full size fingers on you pants to “fingerboard”
i recently got into fingerboarding i find it fascinating love the content!
I LOVE U MAN KEEP UP THE GOOD WORK 👍
thats actually sick
Only if color was same
Use Tacky Glue i work great fro glueing wood and paper together. 😄
I would recommend clear coat on the deck it makes the graphic last longer
7:53
We need a video of alex learning to skate pleaseee
your intro is nostalgic〽️
liking the video only made me 10% more consistent at kickflips but 10% is 10%
I have a video idea: try to build an ultra realistic fingerboard park
Put the sharks wheels on the bored
good job! but i have an idea what if you made a copy of a different board like copy a finger board and make it life size
I have just ordered a set of ill pill wheels and you made me want to get them
Should have used illpills they would be literally identical
I have a little idea! if you can buy skateboard wheels used or new and try to make fingerboard wheels from it!
Idk why, but i wanna see a setup thats like this, but even more like the board, like same shape, same.grip, etc
Basically making a fingerboard look exactly like a skateboard, just shrink down
? that’s literally what he did
@@ovoech3762 I basically wanna see someone make a fingerboard that has basically the same setup as a really skateboard, like sandpaper grip, same style wheels and trucks, etc
@@mr.anonymoose2810he did it except he put on foam
Griptape instead of sand paper
This is sick and you should do try make your bulldog bord into a big bord
We need more unboxings from smaller companies..
looks nice!
Luv your vids
Salut, je suis français, j’adore tes vidéos, une dinguerie. Moi aussi je fais du finger skate mais en France y’a pas beaucoup de youtubeurs finger Board
I love this!
Your all video is so cool trick😮
Where can I buy the mould u use?
it would be really good if you did a video of how you fingerboard and then do the same trick on a skateboard
I was wondering if you could post some straight up clips in shorts of something
crazy
I have never seen a better board😮😮😊❤❤❤
you should diffidently do one of the zero skull graphics and a baker or Deathwish graphics also what is the name and type of tool you use for the countersinks because i just use a screwdriver and twist it twenty five times in each hole it works really well but takes a long time make my hand and wrist really sore.
love the video
You should make an eraser fingerboard
bro the thirty percent worked
I believe Black River makes a 7 play deck now
Cool video also can you put the link to the mold in the comments
Do you not lacquer the board so that it’ll hold the graphic longer? Nice video 🙌🏻
I'm still using a teck deck over 3 years
I'm a total beginner and just learned to do an ollie so correct me if I'm wrong.
But isn't a Tech Deck made from plastic?
So technically it's not a Tech Deck you made.... it's way better.
Currently waiting for my package to upgrade my 32mm Nyjah Huston Tech Deck.
I also have a hand full of 29mm Tech Decks but I don't like them.... not wide enough.
But the 32mm Nyjah Huston Tech Deck is pretty nice.
I like the 32mm, the graphics, the trucks, but that's it.
That's why I ordered bearing wheels, 0,5mm foam griptape and actual bushings.
Because this 32mm does come with rubber bushings but they are poor quality.
Make bart simpsons' skateboard into a fingerboard
nice vid! how do you get the 5 ply wood you use for the mold? is it 5 ply? where do you get the mold and shaping mold too! you should make a video on making custom fingerboards and molding stuff
Amazing idea: "cut venir with scissors"
Where... where did the clear coat step go
It’s 123 now it’s 124 hehehehhe
Hey! Can you make a fingerboard out of foam grip tape 🛹 I hope you can make it🙂
How do you print graphics? Please make a video on it
WHAT TYPE OF PAPER FOR THE GYAT DAYM GOOD AF GRAPHIC
Nice that is soo cool
We’re did you get that white board from that has the black as a out line as a mountin
Where to get a tech deck
I wanna get a g16 mold
Where to buy veneer
When you do that get parchment paper
What paper do you recommend for deck graphics?
Nice
Make Bart Simpsons skateboard as a fingerboard
Do a video of you skating
No he doesn’t but he has video of trampoline skating
Can I have foam griptape for a fingerboard
What skateboard is this
Why would he lie my kickflips aren't 30% more consistent there 60%
very NOICE 🎉🎉
W
Where can I buy that mold?
Create Your Skate
Clear coat.?
Hi gripson you are my fav fingerboarder I hope to be like you one day. Can you tell me how to join your discord server?
No clear coat😅
If I like 2 time am I 60% better at kickflips 😱
day 1 of asking free fingerboard from you
Day ✨30✨ of asking to get blackriver trucks
My name is mason
Skate vid
Skate vid pls
wow
Alex can I buy
👇Here within an hour!!
Do you skate or something😂
Copy the skateboard of Bart Simpson s into a fingerboard
цвет не очень похож он потемнее скейта
Hi
I hope you see my comment!! i make fingerboards under the name of BoneFish, and i was wandering if i could send you a board and you could rate it? i was on your discord a couple years ago too.
🗿
hey gripson you need to get your discord mods together cuz they bandded me for 3 yrs bc im 10
Yurrrr
30 min gang
👇
Can I get one for free please I only have a thck Deck and everyone has one and I don't please 🥺
11 Views lol
59 for me
I am the first comment! The fingerboard looks insane!
Can you please send me a finger board 🥺