Great work. I simulated the scheme but, i did not get the same results as shown in the video, anymore. The problem is in the current. Cab you please help me to overcome this problem? 4:49
Sir this is so helpful for my project work , I request you to make a video of the same circuit explained in this video without MPPT, It will be very helpful for our work sir , Please make same video without MPPT sir
Assalamu alaykom Mr Yahya could you tell me how can i correct this mistake that appear when i lanced the simulation ? ''error in port widths or dimensions''
Nice video. Please make a video on a single-phase double-stage grid-tied inverter along with if it is possible please so the battery management system (charge controller).
Including a delay block (often represented as 1/z) in your simulation enhances its realism. It helps you evaluate the performance of your control system under more realistic conditions, which is essential for designing controllers that will work effectively in the actual system.
Bonjour Mr, j'ai un petit de souci dans la simulation tjr j'ai un message d'erreur coté bloc de wt "Output port of wt is a one dimensional vector with 3 elements " et un coté bloc alpha-beta to dq0" one dimensional vector with 1 element "comment je peux le régler svp
Wa alaykumu assalam! Designing a 200 kW Three-phase Two-stage Grid-connected PV Solar System involves initiating the design sequence by configuring the boost converter, followed by the inverter. Align each component with the specified power requirements. Subsequently, address the controller parameters to optimize the system's efficiency and performance. This sequential approach ensures a systematic and comprehensive design tailored to meet the power generation objectives.
I apologize for any inconvenience, but unfortunately, I am unable to provide a copy of the work file at this time. If there are specific sections or information you are looking for, please let me know, and I'll do my best to assist you
![[LIVE] : ONE ลุมพินี 83 วันนี้!! คู่เอก "พันฤทธิ์ vs ซุปเปอร์บอล วันของโอม MBK"](http://i.ytimg.com/vi/1b4pkKHa_Fk/mqdefault.jpg)
Well do Dr. Khalid, thank you for detailed information and explanations.
Thanks for your support
Hi are you getting the results as shown in the video?
Very informative thanks Dr.Khalid
Very useful and informative, thanks
Hi are you getting the results as shown in the video?
I take great pleasure in assisting you, and I want you to know that I'm here, ready to help whenever you may need my support.
Thanks 🙏 Sir
You have made an extraordinary work.
Hi are you getting the results as shown in the video?
NO @@swarajdey9035
Yes
great lecture 👍
Thanks for your support Dr Ali Eltayeb
Great work. I simulated the scheme but, i did not get the same results as shown in the video, anymore. The problem is in the current. Cab you please help me to overcome this problem? 4:49
Thanks you sir for this important work. Please cant you do one vidéo for stand alone PV-boost-inverter systèm.
ok i will
Hi your model is running?
Simply Superb
Hi are you getting the results as shown in the video?
Sir this is so helpful for my project work ,
I request you to make a video of the same circuit explained in this video without MPPT,
It will be very helpful for our work sir ,
Please make same video without MPPT sir
Hi are you getting the results as shown in the video?
@@swarajdey9035 hi..are you getting the results now?
@@satadalbhowmik7948 yes by following my own model
thanku so much sir
Hi are you getting the results as shown in the video?
Yes
Thanks professor
I take great pleasure in assisting you, and I want you to know that I'm here, ready to help whenever you may need my support.
thanks Mr. Khalid for this interesting lecture. Can you tell me how to draw the scheme that you illustrated in the beginning of your lecture
Hi are you getting the results as shown in the video?
using ppt shapes
Assalamu alaykom Mr Yahya could you tell me how can i correct this mistake that appear when i lanced the simulation ?
''error in port widths or dimensions''
Thanks so much
Thanks for your support
بارك الله بك وزادك من علمه وفضله
@@roaajarf5806 can you please tell me is this simple grid feeding inverter?
Hi are you getting the results as shown in the video?
@@Eng.Khalid_Yahia sir,I am not getting the result as you have shown in your video
Dear Mr. Yahia, could you give any recommendations on how to set right PI coefficients? Is it possible using any optimisation methods from matlab?
you can check my second video
th-cam.com/video/6brnVTfCp7A/w-d-xo.html
I am not getting the same results as you shown . Not getting current.
How to adjust PI controller parameters using algorithm
can you how to decide Vdc voltage value
Nice video. Please make a video on a single-phase double-stage grid-tied inverter along with if it is possible please so the battery management system (charge controller).
Ok I will thanks
@@Eng.Khalid_Yahia I will wait for your next video on this topic.
@@arijeetroy8747 Hi, did you got the battery management system design with grid tied one ? please reply
Why did you use 1/z before Mppt function,please ,?
Including a delay block (often represented as 1/z) in your simulation enhances its realism. It helps you evaluate the performance of your control system under more realistic conditions, which is essential for designing controllers that will work effectively in the actual system.
Bonjour Mr, j'ai un petit de souci dans la simulation tjr j'ai un message d'erreur coté bloc de wt "Output port of wt is a one dimensional vector with 3 elements "
et un coté bloc alpha-beta to dq0" one dimensional vector with 1 element "comment je peux le régler svp
Hello Fatima, i have right now the same problem, Please tell me how did you remove it
Hi are you getting the results as shown in the video?
Can anyone explain me why the grid side output voltage is -316 to +316? And it is rms or peak value?
The peak value is obtained, but if you need the RMS value, divide it by √2 (square root of 2)
Assalamu aleykum, how can I change the parameters to 200 kW
Wa alaykumu assalam! Designing a 200 kW Three-phase Two-stage Grid-connected PV Solar System involves initiating the design sequence by configuring the boost converter, followed by the inverter. Align each component with the specified power requirements. Subsequently, address the controller parameters to optimize the system's efficiency and performance. This sequential approach ensures a systematic and comprehensive design tailored to meet the power generation objectives.
@@Eng.Khalid_Yahia Thank you very much!😊
Why 3 phase source is connected at last?
The three-phase source connected last in order to present the grid
Can you sharebase paper Simulink file?
I am nt getting the exact output shown by you, can you please share your matlab file
Check the configuration if you are not getting the expected output in a simulation
Hi, i did not get the same results as shown in the video, anymore. The problem is in the current. Did you get any solution?.
Thanks in advance.
Dear Sir, may I please request a copy of the work file? Thank you
I apologize for any inconvenience, but unfortunately, I am unable to provide a copy of the work file at this time. If there are specific sections or information you are looking for, please let me know, and I'll do my best to assist you
How can determind the Wsw
Wsw=nw
hi i need some help
Can u send me the simulation MATLAB file
standalone mode of pv system simulation need sir please make a video thankyou sir
Absolutely, I'll proceed with that.
Please simulink !
Thanks for your work. Can u send me the simulation MATLAB file
Hi are you getting the results as shown in the video?
yes
u send me the simulation MATLAB file@@Eng.Khalid_Yahia
Can u send me the simulation MATLAB file