Increasing Traffic and crowd density settings were causing excessive stuttering, dropping them to low helped. I used amd gpu driver 25.1.1 for running this game.
Every time I use AFMF on any game it stutters as if my fps aren’t syncing. I don’t know what else to do. I see the fps go very high but it’s unusable for me at least. I don’t know what to do. 😢 I notice when you turn it on it always works for you and I turned it on from the AMD software not armory crate and again when it’s active it just doesn’t seem to work at all. Every time I move my right stick it’s terrible so I just turn it off. Is there something I’m doing wrong ? Please help 😢 I have the Ally X btw
AFMF is totally suck bro, i already try it to some games like Ghost Of Tsushima and etc. The game can run like 100fps (sync to my monitor 100hz) but the FPS is not stable, i already compared AFMF and Lossless Scaling and the results is totally different. Lossless scaling is so much better, i didn't get any frame drop like while im using AFMF.
This issue was present in the preview version of afmf, it seems asus used that version in their official gpu driver. Stable release of afmf 2 fixed this issue. I'm using amd gpu driver here. You can try this : go to desktop , click on the windows icon, click on settings. Click on Apps, then installed apps, search for AMD. Open its advanced options, then repair it. Then click on reset. Test afmf 2 again after restarting your pc.
Bro I wish you could always show 1080p as well. I already know from your videos that you prefer to play in a lower resolution to have max performance but some persons could find useful if you can at least always show the 1080p too
No one should be playing AAA games at 1080p resolution, this game crashed at 900p resolution. People should understand the limitations of the processor and the limited physical memory available. However, the main reason for avoiding it here is the increase in latency as I use frame generation. I'm not going to promote frame generation with a base fps of 25 .
@ yep. but I’m not only talking about this game specifically I meant in general. I always watch you and i know that you prefer lower resolutions, and low settings. Just wish that I could see better graphics settings on all games so at least we can see how it works and than we can decide which resolution or graphics settings I wanted to use myself. But if you don’t see this way ok men
I'll be honest, I wish I had more free time Or more people working on the channel to help me make such benchmark videos which is a fairly simple process.
I think it's fixed on new ally's. My first had SD card broken after a few days, I sent it back and they sent me a replacement, now after almost a year the SD card still works
Don't use ally's turbo profiles, set the tdp manually to 25/30 watts and use a custom fancurve. Keep temps under 80 degree c and everything will be fine. I also have the launch version which runs games better than ever after a year.
@@BakaFeniksu Real world latency is more important , compare it with steam deck, night and day difference. There's nothing to watch on the bottom edge.
@@malkiboy you're an idiot. The reason im saying to not include a controller is: 1. rtss overlay already shows input latency, and since he's playing on a controller, is he able to "feel" the input latency ? imo feeling a delay of 50ms is going to be really tough that too on a controller. 2. Bottom part is where spiderman's shadow is going to be. It would be good to see what shadow ghosting artifacts FSR FG introduces.
So I got the game and tried on my z1 extreme and the lag and stutters unreal why is that I don't get it everything is updated
Yeah I also experienced the same thing, and now the game always crashes, how do I fix it?
@@reskyradja4573 yeah it's weird real weird
Increasing Traffic and crowd density settings were causing excessive stuttering, dropping them to low helped. I used amd gpu driver 25.1.1 for running this game.
Where do u get gpu 25.1.1@@GamingDJ4u
Directly from amd
www.amd.com/en/resources/support-articles/release-notes/RN-RAD-WIN-25-1-1.html
How do you install the new version of adrenaline, i have always error 182....
th-cam.com/video/-v8TLC_kpec/w-d-xo.htmlsi=PhgM3yzWi56CoPc6
Every time I use AFMF on any game it stutters as if my fps aren’t syncing. I don’t know what else to do. I see the fps go very high but it’s unusable for me at least. I don’t know what to do. 😢 I notice when you turn it on it always works for you and I turned it on from the AMD software not armory crate and again when it’s active it just doesn’t seem to work at all. Every time I move my right stick it’s terrible so I just turn it off. Is there something I’m doing wrong ? Please help 😢 I have the Ally X btw
AFMF is totally suck bro, i already try it to some games like Ghost Of Tsushima and etc. The game can run like 100fps (sync to my monitor 100hz) but the FPS is not stable, i already compared AFMF and Lossless Scaling and the results is totally different.
Lossless scaling is so much better, i didn't get any frame drop like while im using AFMF.
@ thanks ! Will have to try Lossless scaling on the Ally.
@@xbox360J welcome
This issue was present in the preview version of afmf, it seems asus used that version in their official gpu driver. Stable release of afmf 2 fixed this issue. I'm using amd gpu driver here. You can try this : go to desktop , click on the windows icon, click on settings. Click on Apps, then installed apps, search for AMD. Open its advanced options, then repair it. Then click on reset. Test afmf 2 again after restarting your pc.
How is the performance with lsfg??
Did you upgrade the storage? I saw many games installed in your z1e.
Yes I use a 2 tb ssd + sd card
Bro I wish you could always show 1080p as well. I already know from your videos that you prefer to play in a lower resolution to have max performance but some persons could find useful if you can at least always show the 1080p too
No one should be playing AAA games at 1080p resolution, this game crashed at 900p resolution. People should understand the limitations of the processor and the limited physical memory available. However, the main reason for avoiding it here is the increase in latency as I use frame generation. I'm not going to promote frame generation with a base fps of 25 .
@ yep. but I’m not only talking about this game specifically I meant in general. I always watch you and i know that you prefer lower resolutions, and low settings. Just wish that I could see better graphics settings on all games so at least we can see how it works and than we can decide which resolution or graphics settings I wanted to use myself. But if you don’t see this way ok men
I'll be honest, I wish I had more free time Or more people working on the channel to help me make such benchmark videos which is a fairly simple process.
Do for OnePlay
does we need to uninstall amd software first?
i cant install the update
th-cam.com/video/-v8TLC_kpec/w-d-xo.htmlsi=HVac_s7iYTa-4AxD
What you use to measure latency and f0s
Amd latency monitor for latency and afterburner / rtss for performance metrics.
Bro which vpn do you use for geforce now
Europe for free tier, no vpn required for paid tier.
Bro plsss try spiderman 2 on oneplay plssss❤❤
great device but still sdcard slot issue
I think it's fixed on new ally's. My first had SD card broken after a few days, I sent it back and they sent me a replacement, now after almost a year the SD card still works
@albertgejmr8922 got mine for 3 months rog ally z1 extreme first week my sd card got burned and now my sd card slot doesnt even work
@@albertgejmr8922fix it how? Isn't it more of a sd slot hardware placement issue?
Don't use ally's turbo profiles, set the tdp manually to 25/30 watts and use a custom fancurve. Keep temps under 80 degree c and everything will be fine. I also have the launch version which runs games better than ever after a year.
@@GamingDJ4u well my rog can't read sd cards anymore and my device isn't even a year old or even 5 months old
hey, can you not include the controller in the view
@@BakaFeniksu Real world latency is more important , compare it with steam deck, night and day difference. There's nothing to watch on the bottom edge.
@@GamingDJ4uon everybody he’s just a hater don’t listen to him ur vids are hella useful your the reason I may or may not get a ally
@@GamingDJ4u are you saying that real world input latency differs from rtss latency ?
@@malkiboy you're an idiot. The reason im saying to not include a controller is:
1. rtss overlay already shows input latency, and since he's playing on a controller, is he able to "feel" the input latency ? imo feeling a delay of 50ms is going to be really tough that too on a controller.
2. Bottom part is where spiderman's shadow is going to be. It would be good to see what shadow ghosting artifacts FSR FG introduces.
@@BakaFeniksu In what world are you living? The vast majority of people don't even know what latency numbers mean.