Jak otwierasz obudowę siłownika? Tego nie pokazałeś, w F10 zamek jest nierozbieralny. Ja próbowałem i nie da rady rozebrać, kupiłem drugi, rozebrać można w E90.
That's another great, money saving repair! I was expecting to see a solenoid when you opened up the door, was quite surprised there is a motor driving a worm gear and cog! Nice work as usual, thanks for sharing :)
hello, I have a 2012 BMW F10 535D that has door closers and keyless entry, and I had the same problem at the beginning: I didn’t open the front left door, now it doesn’t open the rear right door, and what’s more, the car goes crazy, it opens on its own, then closes, or doesn’t work without key access please tell me maybe this is all because of the lock like yours? I'm already tired of suffering with him
Hi,Happy new year!I have ben replace parking brake unit,to used one,it is works fine manual,but automate is not .I did all steps as you did on the video,with can clip v.174,steel not work automate the parking brake,and the fault,is:DF052 multiplexed network,DF039 no UHC multiplex signal,what do you think?Vel satis 2004 2,2dci six speeds, manual,.I can not replace the chassis number on the parking brake ECU.clip need 7 character serial number,on the clip sticker has only 5 numbers.
Zsolt Csaplar Happy New year! You will not be able to change the VIN number with clip... the only option for that is remove eeprom, if fitted, and change it manually... or virginize it and then reprogram everything with clip. As for the multiplex faults, it seems obviously that there is no comunications coming from the uch, reason why the parking brake does not work automatically... Either, ensure that the parking brake is the correct one, or check wiring... make sure all the connections are good, etc... Was that working fine with the old unit?
Hey I have a bmw f30 and the door lock actuator looks similar, in my case the pin that moves up and down works, but even when the pin is down that indicates it’s locked I can still open the door from the outside, any idea? Do I need to get a new door lock actuator? I’m not exactly sure how the locking mechanism works so cant diagnose what the exact problem is
For a straightforward repair, get a second hand lock or new if you prefer, and replace it... It can probably be repaired, but they can be a complicated and difficult to work on... But you can always remove it, and closely inspect it... 👍👍👍
Hello, Do you know if this fix is only for cars with soft close. Mine doesn't have soft close but has the same problem. Do cars without soft close have both actuators or only the one with the latch ?
Hey, i got a f11, 2012, my right rear door wont lock from the key or even from the lock button, when i press the button, it goes down but when i take my finger off, it comes back up, whats wrong _
@@Marco-jy9ju You can scan the car, check live data, try to actuate the lock with the scan tool, see if does the same... But what you described, might be the lock...
What can I do when my 2013 BMW 740 LI remote { or the lock/unlock button inside the vehicle } will only lock, unlock the trunk and the rear doors but not the front doors. I have to lock the passenger door manually and the driver door has to be locked and opened with the actual metal part of the key from the remote??? The batteries are good cause it does all the other functions. Both front doors stopped working at the same time [2 days ago]. Please assist.
Great video, I have a audi a6 09 model with a problem in the latching lock on the drivers side I notice the same type of design for the motor contacts is this a common problem? happy new year.
Hi I've got a ford Mondeo and I'm trying to trouble shoot the front headed windscreen I've checked all the fueses and the heater relay all ok but I've noticed a small crack in the glass right across one of the thin wires could this be my problem and can it be fixed arsome vids keep up the good work
eraysha white Hi Thank you for watching! If the circuit in the has been broken, I doubt there anything that can be done... I never came across that issue, nor have worked on one of those screens... sorry I can't help you that much...
if door is locked and cant be open from the inside or the outside. how did you manage to open the door to get the panel off and to get to the actuator?
@@LMAutoRepairs it is not enough to force panel :( I cant open the passanger door. If I force trim panel I will have to unlock manualy blocked actuator. Do you know how to do this? The withe arm is moving up and down but acutator is still blocked. What should I do to unblock it?
Similar to this... rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fitm%2FDC-12V-FC-280SC-20150-Motor-22mm-Long-Shaft-For-Car-Rearview-Mirror-Door-Lock%2F283101157569%3Fhash%3Ditem41ea24d8c1%3Ag%3ArvMAAOSwE9RbNE5z&campid=5338344466&toolid=20008 Thank you for watching!
Seriously it’s so inconsiderate for you to make a video about this and skip such a crucial step. Every other DIY for lock actuators shows the version held together by screws. There are no DIYs on how to open this kind of actuator. You skipped over that entire section. I CANNOT GET THIS THING APART 😭😭😭 HELP ME PLEASE
Thx great video but psssst there is a Trick for the litle Plastik pin in the door... just push it all the way in then it falls out wenn you Clip the trim lose
They are 12 volts... Everything else I don't know now... Look for one that is compatible with what you are looking for... if is advertised to fit your car, then should work...
Hi there happy new year to you I follow you and its very instructive thanks a lot for sharing your experience and diagnosis If you come to france (south east let me know ) IT LL BE A PLEASURE to meet
amine berrahma Hi Thank you for watching and for follow the channel, much appreciated! Don't know if that is going to happen... although the missus has family in France... 👍
The door lock comes attached to the soft close motor mechanism... The door lock itself doesn't have screws... The unit is reverted together and once opened then that's it... The unit you hold with the with replaced motor seems way smaller than the actual door lock... My eyes could have deceived me but... I did check your video before stripping my car door and then called the dealership as well as some used spare agents who than confirmed some of the points I raised after noticing the discrepancies... But jaah.... Maybe it's model difference matter and my apologies if it is. Keep well sir
Can you please tell me how you got the actuator to come apart?!
Jak otwierasz obudowę siłownika? Tego nie pokazałeś, w F10 zamek jest nierozbieralny. Ja próbowałem i nie da rady rozebrać, kupiłem drugi, rozebrać można w E90.
That's another great, money saving repair! I was expecting to see a solenoid when you opened up the door, was quite surprised there is a motor driving a worm gear and cog! Nice work as usual, thanks for sharing :)
thejoneseys
Thank you for watching!
How do you open up the actuator housing?!?! You skipped that very important part of the video. 🥵
Yes. How was that done please let us know!? 🫣
Yes that’s the most important part
hello, I have a 2012 BMW F10 535D that has door closers and keyless entry, and I had the same problem at the beginning: I didn’t open the front left door, now it doesn’t open the rear right door, and what’s more, the car goes crazy, it opens on its own, then closes, or doesn’t work without key access please tell me maybe this is all because of the lock like yours? I'm already tired of suffering with him
Hi
If you have a lock that you know is not working correctly, I would have that sorted first...
👍👍👍
Thanks for the video!!!! Helps a LOT!!!!
☺️
👍👍👍
Hi,Happy new year!I have ben replace parking brake unit,to used one,it is works fine manual,but automate is not .I did all steps as you did on the video,with can clip v.174,steel not work automate the parking brake,and the fault,is:DF052 multiplexed network,DF039 no UHC multiplex signal,what do you think?Vel satis 2004 2,2dci six speeds, manual,.I can not replace the chassis number on the parking brake ECU.clip need 7 character serial number,on the clip sticker has only 5 numbers.
Zsolt Csaplar
Happy New year!
You will not be able to change the VIN number with clip... the only option for that is remove eeprom, if fitted, and change it manually... or virginize it and then reprogram everything with clip.
As for the multiplex faults, it seems obviously that there is no comunications coming from the uch, reason why the parking brake does not work automatically...
Either, ensure that the parking brake is the correct one, or check wiring... make sure all the connections are good, etc...
Was that working fine with the old unit?
Hey I have a bmw f30 and the door lock actuator looks similar, in my case the pin that moves up and down works, but even when the pin is down that indicates it’s locked I can still open the door from the outside, any idea? Do I need to get a new door lock actuator? I’m not exactly sure how the locking mechanism works so cant diagnose what the exact problem is
For a straightforward repair, get a second hand lock or new if you prefer, and replace it...
It can probably be repaired, but they can be a complicated and difficult to work on...
But you can always remove it, and closely inspect it...
👍👍👍
CAN YOU PLEASE INFORM ME HOW YOU GOT THE ACTUATOR APART!!!!!!!!!
Average cost to repair from a local shop/dealer?
Hello, Do you know if this fix is only for cars with soft close. Mine doesn't have soft close but has the same problem. Do cars without soft close have both actuators or only the one with the latch ?
I believe the locks are very similar...
So, probably the same in this section...
Thank you for watching!
Hey, i got a f11, 2012, my right rear door wont lock from the key or even from the lock button, when i press the button, it goes down but when i take my finger off, it comes back up, whats wrong
_
Possibly the lock itself...
But difficult to tell without further checks...
👍👍👍
@@LMAutoRepairs can u give me any advice what should i check?
@@Marco-jy9ju
You can scan the car, check live data, try to actuate the lock with the scan tool, see if does the same...
But what you described, might be the lock...
I have the same issue I am from Birmingham where can I contact your business please
What can I do when my 2013 BMW 740 LI remote { or the lock/unlock button inside the vehicle } will only lock, unlock the trunk and the rear doors but not the front doors. I have to lock the passenger door manually and the driver door has to be locked and opened with the actual metal part of the key from the remote??? The batteries are good cause it does all the other functions. Both front doors stopped working at the same time [2 days ago]. Please assist.
Hi
Have you checked fuses etc?
Have you scanned the car?
Thank you for watching!
@@LMAutoRepairs Checked the fuses, scanned the car, changed the remote battery, unplugged the battery to reset. Got nothing.
@@TheHodi66
No codes?
Can you actuate the looks individually with the scan tool?
Great video, I have a audi a6 09 model with a problem in the latching lock on the drivers side I notice the same type of design for the motor contacts is this a common problem? happy new year.
vincent o'donnell
Hi
Not sure if this is a common problem... was the first time I came across this...
Thank you for watching!
Hi I've got a ford Mondeo and I'm trying to trouble shoot the front headed windscreen I've checked all the fueses and the heater relay all ok but I've noticed a small crack in the glass right across one of the thin wires could this be my problem and can it be fixed arsome vids keep up the good work
eraysha white
Hi
Thank you for watching!
If the circuit in the has been broken, I doubt there anything that can be done...
I never came across that issue, nor have worked on one of those screens... sorry I can't help you that much...
clever guy.. nicely explained wish i lived near you
😊
👍👍👍
where did you find the small motor?
Hallo brother, my bmw 320D driver door lock is also not working, what happen with that, according to your experience.
sonu yadav
I am not a wizard... lol
Remove it and check it... it might be something simple! 😉
Thank you for watching!
Was the problem causing your fuse to blow?
Also noticed you had accessed the fuse box location on passenger saide, so maybe.
@@twistedcells
Was long time ago... I don't remember... but I am under the impression that was not blowing the fuse...
if door is locked and cant be open from the inside or the outside. how did you manage to open the door to get the panel off and to get to the actuator?
By forcing the panel at the top corner...
Thank you for watching!
@@LMAutoRepairs it is not enough to force panel :( I cant open the passanger door. If I force trim panel I will have to unlock manualy blocked actuator. Do you know how to do this? The withe arm is moving up and down but acutator is still blocked. What should I do to unblock it?
@@tomaszgajek4680 hello, did you got open the doors? I have the same problam us you and i do not know how to open the doors
Hiw do I open my door it's shut and won't open from the inside or outside
You need to split open the interior door panel... creating a gap to allow you to be able to open the door...
Thank you for watching!
What is the name of the motor, i know i can buy it on ebay, people are wondering what the name is or what type it is?
Similar to this...
rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fitm%2FDC-12V-FC-280SC-20150-Motor-22mm-Long-Shaft-For-Car-Rearview-Mirror-Door-Lock%2F283101157569%3Fhash%3Ditem41ea24d8c1%3Ag%3ArvMAAOSwE9RbNE5z&campid=5338344466&toolid=20008
Thank you for watching!
Bmw 7 seris remote center loking all door not working please help
Seriously it’s so inconsiderate for you to make a video about this and skip such a crucial step. Every other DIY for lock actuators shows the version held together by screws. There are no DIYs on how to open this kind of actuator. You skipped over that entire section.
I CANNOT GET THIS THING APART 😭😭😭 HELP ME PLEASE
Thx great video but psssst there is a Trick for the litle Plastik pin in the door... just push it all the way in then it falls out wenn you Clip the trim lose
😊
Thanks!
👍👍👍
can you tell me how to open the moudul.. you cut it ?
Hi
If recall correctly, is clips all round... there is however, a metal pin that you need to grind, or force it through...
Thank you for watching!
another great repair. Thanks for the video and happy new year to you and the family , looking forward to more videos in 2018, Thanks
Mark Eastwood
Hi
Thank you for watching!
Happy New year!
I have the same problem bro
Thank you very much
BMW part $1000- AUD, thank you for your video. Excact same problem on 640i F06 same door.
😊
👍👍👍
Superb job
😊
Thanks!
👍👍👍
Hi , great video. Where can you purchase that motor that you’ve replaced please
You can usually find the on eBay and places alike...
Thank you for watching!
Holy crap can you PLEASE help me figure out how to get this stupid thing to come apart!!!!
Great video
Thanks!
👍👍👍
YOURE A WIZARD HARRY!!
😋
Thanks!
👍👍👍👍
Useful video! Do u remember the length of the original motor shaft?
Pass... don't remember now... sorry...
Thank you for watching!
Good explaining 👍
😊
Thanks!
👍👍👍
Nice video. Amigo. Good. Happy New Year
Mechanic Technician Repair
Thank you for watching!
Happy New year!
Sir you did not show to us how to open the motor unit.it is very difficult part of it.cos it has some reverts.
It kinda does, but it is a quite straight forward procedure...
Next time I will try to capture that...
👍👍👍
I found at my left rear door wasn’t locking after they got into my car and stole all my sh!t.. now I’m here trying to find a solution
I have this exact same fault, same side and everything. Local german specialist wanted £500. Will try this myself...once it bugs me enough
😊
I am sure you will get it sorted...
Thank you for watching and for your comment!
Thanks. Did you own a f02 BMW for a while then? What kind of issues did you have? I knew it was coming...but its defintely been a money pit so far!
@@davidcroney3
I never owned it... was a friend's car, that he asked me if I could fix it...
Doing this fix tomorrow
How do you know?
😊
Thank you for watching!
Great video mate... where can I buy that motor?? What is that motor??
Hi
You can find them on eBay... an probably on Amazon...
Thank you for watching!
@@LMAutoRepairs there is a variety of these motors on eBay, do you have the size, volts. and length of shaft please
They are 12 volts...
Everything else I don't know now...
Look for one that is compatible with what you are looking for... if is advertised to fit your car, then should work...
good job as always thanks for the video
sadik mamoun
Thank you for watching!
Great video! How did you tear apart the actuator to reach the gears and motor? Do you have a video for that?
Hi
No, I don't have a video for that.. sorry...
@@LMAutoRepairs no worries. Can it be taken apart without cutting?
@@joegoh1968
Yes...
I think it is just a little metal pinion that needs fiddling with... if I recall correctly...
👍👍👍
@@LMAutoRepairs that's good to know.
@@joegoh1968
👍
Nice information 👍🏻
Thanks... for watching and for your comment!
I have de same problem with f30
Hi there happy new year to you
I follow you and its very instructive
thanks a lot for sharing your experience and diagnosis
If you come to france (south east let me know ) IT LL BE A PLEASURE to meet
amine berrahma
Hi
Thank you for watching and for follow the channel, much appreciated!
Don't know if that is going to happen... although the missus has family in France...
👍
Hello, how to repleace lock motor?
You need to open the lock assembly...
Thank you for watching!
Gostava de ver um vídeo a abrir o fecho, que sem partir nada não deve ser facil.
Com paciência e determinação...😋
👍👍👍
Big Thumbs Up...
Mike James
Thanks!
👍
Naaah something doesn't add up here.... Many steps not shown 😢
Everything that I thought was important to show, I have showed...
What exactly doesn't add up?
I showed ultimately that it can be done...
👍👍👍
The door lock comes attached to the soft close motor mechanism... The door lock itself doesn't have screws... The unit is reverted together and once opened then that's it... The unit you hold with the with replaced motor seems way smaller than the actual door lock... My eyes could have deceived me but... I did check your video before stripping my car door and then called the dealership as well as some used spare agents who than confirmed some of the points I raised after noticing the discrepancies... But jaah.... Maybe it's model difference matter and my apologies if it is. Keep well sir
@@MisterMsas
Your eyes definitely have deceived you...☺️
👍👍👍
me too nice job
Magid
Thanks!
Skills
😊👍👍👍
magic
lol
Thank you for watching!
HELP ME PLEASE
HELP
I like you
yassine keziwa
Should I be worried?
😉 LOL
Thank you for watching!