PIKO ICE 3 Upgrading - interior light, details

Used materials:
1, Piko H0 57196 Start-Set ICE 3 der DB AG / Gleichstrom analog
2, 1x Piko H0 57691 H0 ICE 3-Mittelwagen
3, ESU lokpilot 3 decoder
4, 24x 3D printed brake disc imitations , 16x simple plates for the rest of the wheels (0,3mm tihickness)
5, Piko 56251 Pantograph (DSA 200 SBB) But probably the Piko 56250 (wider version) is even better
Interior light:
- Cool white LED stripe 12V from "LED and more"
- 2 Pole stecker to add electric connection between 2 cars
www.modellbahn...
- 1x 1200 Ohm Resistor
- Esu flexible wires
The interior light is soldered to the AUX 1 output (digitally switchable with F1)
without resistor it won't work.(too much for 1 output of the decoder)
Colors:
- Vallejo white base color
- Red acryl paint (bordrestaurant seats)
- Grey for the cockpit (custom mix)
- Dark grey for the roof (custom mix)
- Skyblue for 1 isolator (custom mix)
- Revell acryl silver (disc brake imitations)
- Revell brown (wood elements of the interior

[@gabesz]

Rengeteget dobtak rajta ezek az apró részletek! Tetszetős lett.

[@2railnation]

Well done sir! 😎👍

[@grandpaarock]

super👍

[@thegrandwizard1700]

Incredible job. Does the interior already come like that with seats and tables or did you just add the lighting, pedestrians, table lambs, and the paint jobs?

[@danielszakaly]

Originally it's one part the complete interior and blue. Yes as you said, I added the lights, the passangers, and painted them.

[@vendor297]

Very well done. I like! I have the same train. I have a request for a little more detail on connecting the LED lighting. I want to put one up myself. Can you provide a little more detail about the connection method and the components you are using? Any wiring diagram?

[@danielszakaly]

Hello! I don't have any drawing, but the point is: the interior light is soldered to the AUX1 F1 output to the PCB of the model. This function was not used originally. For me the motorised bord restaurant is in the middle of the 5 piece unit. For one direction I was able to use the original Piko electric plugs between the units, because the electric pick up is comint from only one head unit. So just like the AUX 1 output (green cable at the decoder) this one was also perfectly useable. However, for the other head unit direction all of the electric wires are used , so you have to add 2 additional pole, that I solved with mini plugs. You will need a resistor too, that you have to add to the LED stripe circuit. This is the principle, if it's too complicated, write me an email, and I will try to help you!

[@vendor297]

Thanks for answer!

[@trpettuzzo7547]

complimenti bravo

[@bliblablub]

Awesome!

[@danielszakaly]

Thanks a lot!

[@galahad6334]

In fact, the board bistro on most refurbished ICE 3´s is in fact blue. only some small bits are still red.

[@danielszakaly]

I modeled the original one:
de.wikipedia.org/wiki/Datei:ICE3_BordBistro.JPG

[@mittenpulstaktung]

It's exactly the other way around. The original, non-Redesign 403 only had a 'BordBistro' with normal passenger seats and not a proper sit-down restaurant area, while the Redesign 403's have a proper, red sit-down restaurant :)

[@Myron0117]

@@mittenpulstaktung You really are everywhere aren't you

[@Suedtirolerbahn]

It looks so good. Great Job🎉 From where did you get the Pantogtaphs because i need 2 of this for my ICE 3😢😊😮

[@danielszakaly]

Look at the description of the video, I made a list from the materials :)

[@istvangergobagoly8288]

Szia! Az áramszedő milyen gyártmányú, és mennyire kellet faragni hogy helyére illeszkedjen a réginek?

[@danielszakaly]

Szia! Piko az is, a leírásba írtam cikkszámot is hozzá, nem kellett egyáltalán faragni, felment a helyére.

[@jamtart606]

Is that a Piko Talent 2?

[@danielszakaly]

Yes, at the end of the video, you can see the Piko Talent 2 for a short period of time

[@billthai3656]

Hello,
Where can i find the 3d printed Files ?

[@danielszakaly]

Hello, I created them myself, but not so complicated, just a couple of circles :)

[@lars3321]

Can i buy those 3d printed disk imitations somewhere?

[@danielszakaly]

No, I made it myself.

[@lars3321]

@@danielszakaly okay thanks, looks great

[@danielszakaly]

@@lars3321 , Some of the model shops offer metal parts which can be even more realistic, like this: www.modellbahnzentrum-uerdingen.de/h0-d-db-zubehoer-aetzteile-bremsscheiben-ice3-40x.html?language=de

[@lars3321]

@@danielszakaly oh thank you so much!! ill definitely buy that

[@intouchkhaoviset9155]

Look like märklin now!

[@danielszakaly]

I didn't see that version yet in real life, but it can happen :)

[@intouchkhaoviset9155]

@@danielszakaly or you just have the best camera because i am saving up for a piko or roco ICE