Hello, I hope you’re still active on here! You are so much help with everything by the way. Quick question, I have a mythos grinder that is not stop grinding with the hopper in place, I’m leaning towards it needing a new switch and was wondering if that could be the issue? Thanks!
Typically, if your grinder will not stop with hopper in place, it is the relay on the main power board stuck closed. I an sorry to respond so late. TH-cam usually sends a notification and if they did Ruth did not see it. Let me know if I can help you further.
@@noahedborg8184 Thanks for visiting our Channel and for the kind words. Issue: If your grinder continuously runs when turned on and the hopper is in place, the problem is likely a stuck relay on the main power board. Solution: Replace the power board relay to resolve the issue. I hope this helps-good luck!
Thank you for all that you do! I do have a question, my Simonelli Mythos Plus is getting power according to the red light on the on/off switch but the display isn't coming on. Could this be something with the control panel itself or something else?
Hello, A few thing to check. Your on-off switch could still be bad, the ribbon cable could be disconnected or the safety switch on your hopper could be disengaged. Take a look at those things and let me know what you discover, Dave
You are welcome. Thank you so much for suggesting the topic. The price on the activation switch is around $70 but it can vary depending on who you purchase it from.
Love your videos, please keep them coming!
Thank you! Will do!
wish to see a full disassembly of Mythos one :)
Great video . Do you have a video for replacing the capacitor on the mythos one ?
Hello, I hope you’re still active on here! You are so much help with everything by the way. Quick question, I have a mythos grinder that is not stop grinding with the hopper in place, I’m leaning towards it needing a new switch and was wondering if that could be the issue? Thanks!
Typically, if your grinder will not stop with hopper in place, it is the relay on the main power board stuck closed. I an sorry to respond so late. TH-cam usually sends a notification and if they did Ruth did not see it. Let me know if I can help you further.
@@EspressoServiceNetwork any insight how to fix this I have the same issue right now! Would love to hear back keep up the good work!
@@noahedborg8184 Thanks for visiting our Channel and for the kind words.
Issue: If your grinder continuously runs when turned on and the hopper is in place, the problem is likely a stuck relay on the main power board.
Solution: Replace the power board relay to resolve the issue.
I hope this helps-good luck!
Thank you for all that you do! I do have a question, my Simonelli Mythos Plus is getting power according to the red light on the on/off switch but the display isn't coming on. Could this be something with the control panel itself or something else?
Hello, A few thing to check. Your on-off switch could still be bad, the ribbon cable could be disconnected or the safety switch on your hopper could be disengaged. Take a look at those things and let me know what you discover, Dave
😍😍😍
Thank you for doing it. How much is the activation switch?
You are welcome. Thank you so much for suggesting the topic. The price on the activation switch is around $70 but it can vary depending on who you purchase it from.
Great to hear from you, Bill. NS is 15030009 or Sproparts 729019.
What is the exact part number of the switch? That part is cut off before it is sold for replacing in the grinder.
Great to hear from you. NS part # is 15030009 or you could purchase from Sproparts. Their part # is 729019.
@@EspressoServiceNetwork Thank you…
🥰❤️😏