How to Fit a USB Power Socket for Rear Passengers in a Nissan Qashqai
ฝัง
- เผยแพร่เมื่อ 22 ก.พ. 2021
- DISCLAIMER: This is a guide and i can not be held responsible for any damage caused by you attempting this mod, please also note that if your car is on finance, it is unlikely that you can do this modification as it is irreversible.
Such a simple, quick and easy mod to do that should help with those long journies!
Product Links:
12V Car Charge Socket
amzn.to/3bBfrcG
Scotch Locks
amzn.to/3khJzOn
/ theqashqaiguy - ยานยนต์และพาหนะ
good video, it helped me to fir an extra socket. Had to pause it to zoom in to see what colour wire connects to what, but was able to see once paused. Thanks for taking the time to put these videos together.
Planning on doing this next week, have watched this clip a few times, so wish me luck. Cheers
Getting my first qashqai over the weekend 2013 with an 1.6 117bhp engine think it's a tekna in white with black door handles it has cruise control and a 6 speaker system. Can't wait to get it home.
Great just bought the Socket and I'll do this on my Qashqai J11
Nice one. I think this should be possible in my Nissan Pulsar as well. I would, however, have taken the cover off as it makes it look out of place to me, and have chosen one without the display. When it's very dark even a bit of light can be annoying to the eyes of the ones in the back.
It was useful, thanks!
Well done. Nice job.
Nice mod. Might do the same thing for my Nissan Qashqai.
Would you make a video of how you neatly tuck in the dashcam? looks very nice and compact.
Yeah sure, will add that to my list, thanks
Good video as always but i think you need to get a microphone as you are very quite and we have a job to hear what you are saying
Yeah theres a socket as well with a blue and black wire.....thats the one with the 3 pin as per your vid, sorted.....thanks once again
No worries.
Hi Dan, great vid.
Any idea if it can be done on a 2019 model? I've pulled the back panel off but I don't have as much space behind as you do, there's another plastic panel there
I'm not sure I'm afraid. It needs a good 2 to 3 inches clearance behind
Do you still know if the blue and the black one are the negative or positive pole?
Hi Dan, great vid. Ive bought a socket. To clarify did you put the 3 pin socket back in so you also had the USB working in the glove box as well as the new socket? Thanks Alan
Hi yeah the plug went back in and all working as it should.
Cheers thanks for getting back so quickly. One last question my socket is actually a USB connection (2016 Tekna) when i removed the cover there are no exposed wires like on your vid. If i cut the USB wire do you think there will be 2 wires to join the positive and negative to the new socket as i dont want to cut the wire and find i cant wire it up! Thanks Alan
No the usb is used for data transfer too so I wouldn't use that. Is there no power socket in the armrest?
I'm not that knowledgeable, but I've tried to do this at the front cig lighter and am not getting any power? I think I've checked the right fuse at the top 2nd from left, and seems fine. Wondered if you could help?
Check it with a volt meter to see it's getting power. Could be a faulty unit
Nice tidy video 📹..I used a glue gun to help it keep in place 😀
hey on a 2014 qashqai when you plug the usb charger in the lighter port it stays getting power even when off. is there any to male it go off with the key?
Not that I know of. The one in the arm rest goes off after around a minute.
is there possibility of running too much current or voltage from the one line (while using the dashcam and charging devices from the mod)?
dash cam draws very little power. usb ports also between 2.1A to 4.8A it depends on the usb itself and the device you charging. but any way if there's too much current it will blow the 15A cig fuse.. if you tap into tap of course..
Hi dan, when we disconnect the battery, do we need to disconnect both the negative and positive?
Just positive and make sure it's away from the terminal
Also make sure you have any stereo codes if applicable. I didn't have an issue though.
@Dan Smith thanks 🙏🏻. Do you know where I might find my stereo codes
If applicable, they may be in your service book or owners manual
Its better to remove the negative in case the positive touches the frame of the car which is all connected to the negative!
does the battery disconnected first or not before connecting electric cables?
Disconnect
Did you plug the original socket back in as well ?
Yes
I've just checked and mine looks different Inside , doesn't look like I can access the 12 volt from the back panel
Can you turn the voice off on sat nav j11
Yes you can. Check out my video on the sat nav.
32mm hole saw is too big you need 29mm