Weather Station BRESSER 7 in 1 solar 6 day 4CAST PRO Wi Fi

แชร์
ฝัง
  • เผยแพร่เมื่อ 2 ก.พ. 2025

ความคิดเห็น • 42

  • @hectormann2559
    @hectormann2559 14 วันที่ผ่านมา +1

    Brilliant tutorial, i purchased this model and git so frustrated with trying to connect to wifi i very nearly returned this, however thanks to you i have now completed this task.. 10/10

  • @mihaibotea
    @mihaibotea ปีที่แล้ว +9

    Great video, very clear useful explanations. Bresser should thank you for this :)

    • @ModsterDTU
      @ModsterDTU 2 หลายเดือนก่อน

      We greatly appreciate it. The Bresser Team.

  • @JoseAntonio-lw5gh
    @JoseAntonio-lw5gh 4 หลายเดือนก่อน +1

    Great review!!! the Bresser is the best... with 5 years warranty that come to handy if one of the sensor come to be fried by the sun...

  • @gertdejonge6050
    @gertdejonge6050 ปีที่แล้ว +1

    Thank you! Very clear explanation.
    73 de Gert - PD0CT
    The Netherlands

  • @zutisch
    @zutisch ปีที่แล้ว +1

    Best Review in TH-cam. Thank you.

  • @captainmorgan8907
    @captainmorgan8907 ปีที่แล้ว +1

    Thanks

  • @CurryBeatZ
    @CurryBeatZ ปีที่แล้ว +1

    8:53 NOT all weather icons are displayed. You will never see windy, thunderstorms, rain (without sun in between). The forecast comes from Openweather, the worst provider I have ever seen. Visibility only goes up to 10km. Otherwise the station is very good. You can also add air quality and lightning sensors to the station. The lightning sensor detected over 280 lightning strikes during a strong thunderstorm called MCS

  • @chrisb012
    @chrisb012 11 หลายเดือนก่อน +2

    Watched this as my Climemet 2000 has died. Will get this station to replace it. Is it me, or all us HAMs also weather geeks? Thanks for the video. 73 de M7LGC.

  • @franccm
    @franccm 2 หลายเดือนก่อน +1

    Hello, can you tell me the diameter of the tube where you place the external sensors, perhaps it is 5 cm in diameter?

    • @franccm
      @franccm 2 หลายเดือนก่อน

      Minute 10:44 thanks

    • @PeterHomer-nn1ou
      @PeterHomer-nn1ou  2 หลายเดือนก่อน +1

      Hi. The tube that I used is 1 1/2 inch (38mm) in diameter

  • @fuball7.756
    @fuball7.756 11 หลายเดือนก่อน +1

    Do you need an extra sensor to display air quality data?

    • @PeterHomer-nn1ou
      @PeterHomer-nn1ou  11 หลายเดือนก่อน

      No it is all built in to the main unit outside.

    • @fuball7.756
      @fuball7.756 11 หลายเดือนก่อน

      ​@@PeterHomer-nn1ouSure? In the manual it says:"4.3.12 AIR QUALITY
      Air quality section shows the visibility distance according to the device location input in PWL. If
      you have optional PM2.5/10 sensor(s), you can also view the corresponding data in this section."

    • @CurryBeatZ
      @CurryBeatZ 11 หลายเดือนก่อน

      Yes

    • @JoseAntonio-lw5gh
      @JoseAntonio-lw5gh 4 หลายเดือนก่อน

      @@PeterHomer-nn1ou air quality? no it doesn't... you should buy proper sensor to test PM2.5

    • @JoseAntonio-lw5gh
      @JoseAntonio-lw5gh 4 หลายเดือนก่อน +1

      @@fuball7.756 you're right... if you have to test PM2.5/10 you should purchase the proper sensor as i had done...

  • @cbbesson
    @cbbesson ปีที่แล้ว

    Dear Peter. Thank you for your video very clear and useful. I might have missed it in your presentation, but do you know how many days of data the equipment can store in the internal memory (or external cloud) and what is the possibility to download raw data on a computer and the related time frequency for downloading the data? Thank you for your answer

  • @esbenhoffmann5421
    @esbenhoffmann5421 ปีที่แล้ว +1

    Thanks for your video.
    It helped me choose this particular weather station.
    I've had a Davis before.
    I have now set up this new weather station. but it shows completely wrong wind direction.
    I thought somewhere I could choose whether the sensor was facing north or south. but now I can't find that place to see if I've chosen the wrong direction.
    Can you remember where it is and explain how I get there.
    Hope you understand my text, I use google.
    Greetings Esben, from Denmark

    • @PeterHomer-nn1ou
      @PeterHomer-nn1ou  ปีที่แล้ว +2

      Hello Esben. It did take me a few minutes searching through the manual, but found the information on page 33. section 6.3. You will find it in the settings setup at the very bottom. You'll see outdoor sensor direction. I hope this helps and thank you for watching the video.

  • @gwenm.
    @gwenm. 9 หลายเดือนก่อน

    Thank you Mr Homer ! (l’m french, sorry for the mistakes) Do you think that the height of the station can prevent the connection with my WIFI? Because my station is connected to my console, but my console can't connect to my WIFI, and have no idea where the problem is. If you (or anybody else) have an idea, it is welcome.

  • @qtxalan
    @qtxalan ปีที่แล้ว +2

    How do you changed the Wind from m/s to mph. I wan't to chanhe it to KMH.

    • @PeterHomer-nn1ou
      @PeterHomer-nn1ou  ปีที่แล้ว +2

      Press and hold the "Unit" button on the back of the display until all the setting go blank then press the "Unit " keep pressing the "Unit" button again until the wind is highlighted press the "Up" / "Down" buttons on the back of the display until it indecates "MPH". Press and hold the "Unit" button to return back to normal display. I hope that this helps. Thanks for watching

    • @qtxalan
      @qtxalan ปีที่แล้ว +1

      @@PeterHomer-nn1ou Thanks for helping.😁

  • @wallythornton8439
    @wallythornton8439 ปีที่แล้ว +1

    Hi there since watching your video you convinced me to buy this.would it be ok to ask you some questions about it.thanks Wally.

    • @PeterHomer-nn1ou
      @PeterHomer-nn1ou  ปีที่แล้ว +1

      No problem at all Wally ask away.

    • @wallythornton8439
      @wallythornton8439 ปีที่แล้ว

      Is there way I can Collaborate the uv reading.

    • @PeterHomer-nn1ou
      @PeterHomer-nn1ou  ปีที่แล้ว

      @@wallythornton8439 Sorry none that I know of

    • @JoseAntonio-lw5gh
      @JoseAntonio-lw5gh 4 หลายเดือนก่อน

      and you have 5 years WARRANTY.... which is important because some sensor might get fried under the sun...

  • @AndyWoodger
    @AndyWoodger ปีที่แล้ว

    @peterhomer How is your weather station now? My PWS has a sensor issue not recording temperature. I saw this video and was quite impressed what you get and a 5 year warranty. Is this unit still performing well?

    • @PeterHomer-nn1ou
      @PeterHomer-nn1ou  ปีที่แล้ว

      Yes, I am very pleased with the performance of this weather station. I have had a few in the past and I must admit this is one of the best that I have had and used. It is performing faultlessly. I did buy there lightning detector as an add on and found this to be very disappointing. As regards to the weather station 100 percent love it and I would recommend it. Thanks for watching.

    • @AndyWoodger
      @AndyWoodger ปีที่แล้ว

      @@PeterHomer-nn1ou This is very encouraging. I was thinking of a Davis unit but I'm not too keen to spend so much. I've had a cheap unit before which actually lasted a couple of years, so if this unit has a 5 year warranty maybe I should go for this. Can any other sensors be added?

    • @AndyWoodger
      @AndyWoodger ปีที่แล้ว

      @@PeterHomer-nn1ou I've followed the link to Bresser. Can I ask the price of the unit you got? I've seen another thats similar, a 4 day not a 6 day. The Bresser range all look similar but the prices vary quite a bit from £150ish up to £450 so I'm not too sure which is which!!

    • @PeterHomer-nn1ou
      @PeterHomer-nn1ou  ปีที่แล้ว

      @@AndyWoodger The one that I bought is this one at £245
      www.bresseruk.com/Weatherstations/WLAN-Weather-Stations-Centers/BRESSER-7-in-1-solar-6-day-4CAST-PRO-Wi-Fi-Weather-Station.html.
      Regards Peter

    • @JoseAntonio-lw5gh
      @JoseAntonio-lw5gh 4 หลายเดือนก่อน

      well some sensor might get fried under the sun... i lost OUTSIDE TEMP and i got reply from Bresser which they would send me a REPLACEMENT under the 5 years warranty... so i'm waiting now!!!

  • @NativeGroup-j1t
    @NativeGroup-j1t 5 หลายเดือนก่อน

    when I connect my laptop to the bresser console wifi PWS-E68518, I loose connection and I can not go ahead to install the weather station. what do you advise?

    • @JoseAntonio-lw5gh
      @JoseAntonio-lw5gh 4 หลายเดือนก่อน

      You should have the sensor near the laptop and the monitor... only after the wifi setup you should place the sensor on the proper location (nevertheless you should test the new location as wifi friendly...)

  • @razvanafloarei6256
    @razvanafloarei6256 10 หลายเดือนก่อน

    Can you connect to the weather station with your phone?
    I want to also get info while I am not at that location.

    • @JoseAntonio-lw5gh
      @JoseAntonio-lw5gh 4 หลายเดือนก่อน

      yes throw Proweather Live...