ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
ต่อไป
เล่นอัตโนมัติ
Fix Worx Landroid problemKenneth Steen
มุมมอง 103K
Repair "Lifted up" error using a magnet on Landroid WG796e.1 and other WG7 seriesRoss Cullen
มุมมอง 4.5K
Finishing off a failed box fan motor Technological Heritage
มุมมอง 57
กองเชียร์ #ก้าวไกล เนืองแน่น! ร่วมทำกิจกรรม ณ ที่ทำการพรรค พร้อมตั้งแถวปรบมือ-ให้กำลังใจ สส. #shortsTHAIRATH Online Originals
มุมมอง 64K
ประวัติวิวกุลวุฒิ #shortsKen Bkk
มุมมอง 56K
Worx WG790E.1 løfte fejlWorx Reparation og Tips
มุมมอง 911
🔥 Why isn't this patented yet? Insert the CARDBOARD into the angle grinder!Fix it fast
มุมมอง 99K
Worx Landroid byta knappcellsbatteri KnopfzelleMikael Albrektsson
มุมมอง 28K
Worx Landroid Firmware UpdateBlind Science
มุมมอง 19K
Worx Landroid Garagenbau Teil 1.Socataflyer
มุมมอง 90K
Landroid Worx WG794 - Lifted up ErrorMan Must Build
มุมมอง 3.9K
Mähroboter defekte Leitung finden und reparierenGrasgeflüster
มุมมอง 254K
Worx Landroid - Fix broken battery WA3225Erik dHersigny
มุมมอง 21K
WORX Landroid M700 WR142E - TEIL 1: Mähroboter auseinanderbauenCY Hobby Handwerker
มุมมอง 2.9K
ประวัติซุง Sungstarwin หัวเรือใหญ่ LovePotion + ตลาด SaveOneGo #sungstarwin #nwfinance #ธุรกิจNew World Finance by Thanayos Kongpichetkul
มุมมอง 758K
Now You C-Amy EP.190 I เที่ยวนครนายกทั้งที จะไม่มี น้ำ รพีภัทร ได้ยังไง !!Bangpoon Campus
มุมมอง 118K
“กัณวีร์” สส.เป็นธรรม นำดอกไม้มาให้กำลังใจแกนนำ #พรรคก้าวไกล หลังถูกยุบพรรค #shortsTHAIRATH Online Originals
มุมมอง 124K
นักกีฬาไทย ถ้าแข่งโอลิมปิกได้เหรียญ จะได้เงินกี่บาท!? #วิเคราะห์บอลจริงจังวิเคราะห์บอลจริงจัง
มุมมอง 211K
CAMPปลิ้น | EP.79[1/2] แก๊งไทบ้านพาบุกเมืองบั้งไฟโก้ ยโสธรรรร!!!โคตรคูล
มุมมอง 953K
Magic trick 🪄😁Andrey Grechka
มุมมอง 4.1M
'พิธา' นำทีม พรรคก้าวไกล แถลงหลังถูกยุบพรรค ยืนยันไม่ทิ้งประชาชน | TODAYTODAY - สำนักข่าวทูเดย์
มุมมอง 240K
best way out of the labyrinth🌀🗝️🔝LOL 2
มุมมอง 3.5M
Merci pour ce partage.
J'ai réussi à réparer mon clavier à l'aide de vos schémas sur les contacts.
en fait rien que le fait de décoller le clavier du socle a permis de libérer la pression sur la touche 1, celle que j'utilise la plus souvent.
Je vais m'empresser de modifier mon code pin pour éviter cette touche qui est un peu fatiguée.
merci encore et bonne continuation à vous, peut être pour d'autres tutos sur d'autres pannes...😁😁
Thanks for the feedback, and great work!
Thanks for this video. Saved me a good chunk of time today!
Tack för hjälpen. Bytte sensorn idag.
Mine got wet yesterday, then it would mow for a while and say wheel motor blocked. I started to take it apart but didn’t finish because I didn’t see the screws by the blade motor. After I put it back together, I kept getting a “lifted up” message that wouldn’t clear. Thanks to your video, I’ve taken it apart and have a fan blowing on it to dry it off. Hopefully it will work when I put it back together.
Good luck Adam! Hope the drying will make it work again!
Anders Johnsson I let it sit under a fan overnight. I noticed that the front bumper sensor magnet has rubbed a hole in the plastic. I removed the sensor and the little hole let dirt in and the sensor was dirty. I tried to rub some of the dirt off and put everything back together. I am still getting the “lifted up” error and it won’t clear. I’m not exactly sure what everything means on the menu when you press “2”. I wonder how hard it is to do a factory reset.
Thnkas for this vid, will help me tonight but missing 10s to check the electro inside the mower
Thanks a bunch. I couldn't find the 3 screws under the height adjustment
Matchande T-shirt och verktyg...fint skareva. :-)
Lars Liljeberg Haha! :)
Has anybody managed to replace the outer bearing in the drive gearmotor, any advice to get the hexagon-hub off is very much appreciated.
good vid but I wanted to know how to take the wheels off!
Precis vad jag behövde
somebody knows how to control the front sensors of the wg791e worx robot there is one that controls the worm and the other one that controls the limitation of the boundary wire and I believe that it is this one that makes my robot mow well but when he has finished his work more than average (he comes back to the base of food even if I push on home he does not recognize the cable of limitation of the ground everything is OK except that he does not want to return on the base (and one tell me it was the delimiting sensor or found it !!!) thanks for an answer
Sorry, no. But please join the Worx Landroid Lawn Mower group on Facebook and ask the question there!
quelqu’un sait comment contrôle les capteurs avant du robot worx wg791e il y en a un qui contrôle la tonde et l autre qui contrôle la limitation du câble périphérique et je croit que c est celui-ci qui foire mon robot tond bien mais lorsqu'il a fini son travail plus moyen qu(il revienne sur la base d 'alimentation même si je pousse sur home il ne reconnais pas le câble de limitation du terrain tout est OK sauf qu'il ne veut pas revenir sur la base (et on m'a dis que c'était le capteur de délimitation ou le trouvé!!! ) merci d 'une réponse
My screen has condensation in it. Anyone have any idea how to clear that? If I blow warm air on it, from which direction should that be? The top? The underside? Should it be upside down? Upside right? At an angle? Surprised this isn’t clearing just sitting in the sun. I don’t know how the water got in so I don’t where to try to have it come out.
To answer my own question if anyone has the same question. First I tried letting it sit in the sun…no change. Then I figured since the water may have gotten in underneath I’ll leave in the sun upside down and maybe it’ll heat up and evaporate out…86 degrees in the sun all day…no change.
Then I tried letting it sit on top of a blowing floor vent all night…no change.
Then I tried laying it at 45 degrees with the screen on the downside and blowing a warm air heater on it. Helped a little but it quickly came back.
Then tried blowing it on the underside while it was on its side with heater blowing at a bit of an angle from the back. That seemed to be slowly helping….it looked like a car window defrosting from the bottom up. Then I tried opening the battery compartment, taking out the battery, and blowing the air in to the compartment while it was still laying on its side. That seemed similar to the other way but maybe a little better.
We left it blowing on it like that for about 12 hours and it very slowly finally cleared. Rain sensor started working properly again too (it was stuck on Rain Delay unless I turned that off altogether).
Finally good as new.
Something went wrong for me😬.
Thought i assembled everything (put new sensor in) however it started Up, ran for 10 sec and stopped with error saying engine blocker(reset doesnt Work). My thoughts are, that i somehow installed the engine or "wheel"/knob in top in wrong- the knob that controlls the height og the grass. In your video i cannot see or figure out how to asemble Thise two parts again 😭
As far as I remember, I only rotated the cutting height adjustment so that the highest setting actually raised the knife disc to max. If you can't solve it, there is a good Facebook group called Worx landroid lawn mover!
Thx alot! Think sensor initially was the problem - so damned a new one appeared
My Landroid Worx M doesn't keep the data when it switch off. They told me tht is the tampon battery and they need to open the Landorid ( 2 weeks... of job! lol...) So I followed this video and open the Landorid, but I don't find the tampon battery. Do you have any idea where it is please? Thanks from italy
Hi! Sorry, but I don't know where it is. But please join this group and ask the question there!
facebook.com/groups/210034662723898/
На этой модели батарейка cr1220 находится на плате, в углу, залита серым силиконовым герметиком.
Hej!
Jag tror att lager är slut vid skivdisken eller längre in på axeln på min Worx Android 1000m2. Det visslar när jag snurra på axeln. Måste riva hela skalet för att komma åt eller kan man få ut axeln under ifrån?
Det vete tusan, tyvärr! Men nån annan kanske har svaret här? Eller så kan du ställa frågan i Worx Landroid-gruppen på Facebook!
I miss the part with the wheels or the blade motor
When I will run into problems with those, I will film and post a video! :)
Hello.My Landroid 790E.I just switched from English to french and cannot recognize the pin code.What can I do?
Oh. Don't know. Search for "Worx landroid lawn mower" on Facebook and join the group. There, you can ask the question!
Use google translate?
hello, I'm Italian, I have a wg757 and some keys such as the down arrow, key 6 and key 7 and the OK key do not work and I cannot continue with the programming
Do you kindly have information on how to restore the functioning of these bubble tests?
Thank you
Mario
Hi, sorry to say, I don't have any information about how to solve this. However, you can join this Facebook group and ask the question there! facebook.com/groups/210034662723898
Finns det något backup batteri i roboten och var sitter det då isåfall?
Hmm. Vet faktiskt inte! Vad vill du nollställa eller fixa?
@@hemmaproffs Har glömt min pin kod och det kostar 1000kr att få min maskin resetad av Worx...har en WG796E.1
@@MRJOHNPL1 Ajdå! Men jag undrar om det skulle räcka med att bryta strömmen. Jag tror pinkod är lagrad i minne som inte behöver ström. Men jag är osäker!
@@hemmaproffs Ja så kan det vara...bara att bita i det sura äpplet! Tack för responsen 👍
@@hemmaproffs Kan man bare trække stikket ud og sætte det i igen også ændre pin?
Snygg film! Är det någon som vet var man kan köpa reservdelar till landroid? Jag hade behövt byta keypad pga vattenskada....
Tack!
Borde gå att hitta svaret i Landroid-gruppen på Facebook! Är du med i den?
@@hemmaproffs Den kände jag inte till. Går med nu! 😊
@@henkeCHL Kanon! Där finns många tips att söka efter - eller såklart - fråga efter!
Hi, has anyone experienced this problem with this robot:
It will not charge anymore. Bought a new battery but the same thing happens. It is on the charging station and the light switches between red and green, -red light for about 5-6 seconds, then green for a second. The Worx Support in Denmark hasn’t heard of it before.
Hi!
Try posting this in the Worx Landroid lawn mover group on Facebook! There are a lot of people there, and I think I have seen a post with this issue!
@@hemmaproffs Tak! Calle Hellestam has had the same problem and could tell me how to solve it.
I do not know how to have the display to enter my account pin j pressed the button on off and the display does not light up what to do my robot worx wg791e do you have a reply thank you
Hi! Is the robot completely discharged?
Try this:
1. Remove the battery.
2. Put the robot (without battery) in the charger station.
3. Wait one minute.
4. Remove the robot from the charger station.
5. Put the battery back into the robot.
6. Put the robot back into the charger station.
7. Now, the display should say: "Emergency charging".
@@hemmaproffs bonjour je n ai plus moyen d allumé mon robot worx landroid wg791e j ai changé la pile de l écran se trouvant sur la platine du circuit imprimé a l 'intérieur (cr1225 3v ) servant pour l écran celle ci était morte 0,5v depuis plus moyen d allumé mon robot !!!! NB/ quand je le mets sur la station sans la batterie la lampe verte vire au rouge j appuie 2secondes l écran s allume et m'indique batterie en charge 0a100%puis me dis code incorrect au revoir puis il s'éteind !!!! si je remet la batterie et que je fais la même opération il ne s'allume pas !!! même si je le fais hors de la station plus moyen de l 'allumé plus aucune touche ne fonctionnent l'écran ne s'allume pas que faire NB ; la batterie est chargée nouvelle batterie merci pour votre réponse si il y a !!!
@@jeanbn3621 Hi! Please join one of the Facebook groups for Worx Landroid and post your question there! I think someone might be able to help you!
Hi, is ist possible to exchange the Keyboard without unscrew the whole bot?
Hi! Not sure, actually! I haven't tried to change the keyboard.
Anders Johnsson thanks for your response.
Looks like a no on the WG794 Type 2. I'm changing mine out now. For anyone curious, there is a slit that the ribbon cable goes through that makes it impossible. Could be different on other models though.
@@typo_ I have a replacement keypad on the way for my WG794. Looks like it's straightforward to get the orange cover open. Was it difficult to actually replace the keypad?
@@Andrewflusche I believe it was as simple as unplugging a couple wires and plugging in the new ones.
Wo kann ich ein Frontsensor bestellen?
Maybe this would help?
positec.ricambio.net/site/pagece5.wplus?ID_COUNT=ce_5_login&LN=4&CELN=2&CEME=4&CEPV=Positec001
quelqu'un peut-il m'aidé plus moyen d allumé mon robot worx wg791e pour rentrer mon code pin même a partir de la base recharge manuel çà ne marche pas tester la batterie elle me sort 24,9v merci pour une réponse
Hi!
Sorry, but I don't speak French. I ran your question through Google translate, but couldn't understand it.
bonjour je n ai plus moyen d allumé mon robot worx landroid wg791e j ai changé la pile de l écran se trouvant sur la platine du circuit imprimé a l 'intérieur (cr1225 3v ) servant pour l écran celle ci était morte 0,5v depuis plus moyen d allumé mon robot !!!! NB/ quand je le mets sur la station sans la batterie la lampe verte vire au rouge j appuie 2secondes l écran s allume et m'indique batterie en charge 0a100%puis me dis code incorrect au revoir puis il s'éteind !!!! si je remet la batterie et que je fais la même opération il ne s'allume pas !!! même si je le fais hors de la station plus moyen de l 'allumé plus aucune touche ne fonctionnent l'écran ne s'allume pas que faire NB ; la batterie est chargée nouvelle batterie merci pour votre réponse si il y a !!!
Very bad brand, 1000 problems (I called the after-sales service several times without being able to get an answer regarding the robot's problems, or warranty coverage). A Chinese scam!
Garbage engineering and bad design all over this mover