Yup, maybe some thick grease worked into the acme drive thread may take down the noise enough to be bearable. It looks very dry all over - lube needed all over when sitting or in use!
Those bearings sound hideous - both mill and lathe. Disassembly, burr removal, thorough cleaning and lubrication, replacing the existing bearings with a good set of needle bearings and tightening gibs will go a long way to perfecting this machine. I can say that it's already a cut above the basic Chinesium lathes that Horror Fright currently sells in its stores.
For a hobbyist machine, pretty well appointed.That said,(being a retired high-precision engineering professional)I cringe seeing anyone spin a self-centering 3-jaw ( or any )chuck with no workpiece clamped in it.Being brained by a jaw is decidely not funny.
I own one of these and used it for my hobbies over the last 15 years. It's a great hobby or beginner business lathe. It isn't very robust in that the motors won't run forever, I've had to repair them a few times. Other than that it seems to be acceptable for hobby work. This machine seems to be missing the spring item 166 for the Crank Handle Item 163 to manually use the lead screw. I mention this because when you engaged the lead screw auto feed the crank spun. When it has the spring properly installed the crank will not turn. An easy fix but one that should be looked at if your crank handle turns with the lead engaged. Thanks for sharing. Best Wishes & Blessings. Keith Noneya
Smithy is a brand name for another such machine, probably the same questionable quality. Harbor Freight sells Central Machinery, what is this machine really?
Bilo bi mi veoma drago da imam jednu ovaku mašinu. Međutim, cena je sigurno visoka za moja primawa. Uz mala ulaganja mogao bih da napravim brojna poboljšanja, postala bi savršena mašina.
IT DIDN'T SOUND LIKE BEARINGS SOUND LIKE ROCKS GRINDING UP PRISISION -MAC- DONT MALE THAT MUCH NOISE THEY QUITE--AN SMOVE IF IT DON'T SAY PRISISION DON'T BUY IT -SAME AS A DRILL PRESS
I had one of these machines about 25 years ago, and they're generally ok for hobby work/learning. They have a HUGE capacity(which can't be utilised effectively, as the swing is FAR too large/machine lacks power and rigidity ie very tall tool-post assembly, excessive vibration, etc. Get the long bed variant with a screwed capstan riser. The mill/drill is ok, but the rigidity leaves lots to be desired, and forget climb milling!!!! I sold mine, three years after I bought it for the same amount that I paid for it, and it was a good tool for learning. BTW this machine sounds horrendously loud!!!
@@JesusHernandez-lv4rx 25yrs ago I paid £1200 for a new machine with standard tooling ,3 & 4 jaw chucks..... Great machines for learning with and should you spend the time increasing the rigidity, then it would be a good machine for small jobbing work - 225mm swing over bed is ideal for brake disc resurfacing, small cylinder head refacing.......
Of course its noisy when he deminstrates the highest speed and its on the boards on the floor sheet metal covers not steel ,And for the price ,and machining is done alot more slower and I see what others don't and challenges need to be met ,and you would be suprised what I would do with this.
Meine Empfehlung: Finger weg - nicht kaufen! Ich bin ausgebildeter Fräser und Dreher in der Metallverarbeitung und mache meinen Job seit 1985. An dieser Maschine sind die Antriebe veraltet, das Getriebe für die Drehbank hörbar schlecht, und das Hauptlager der Drehspindel ist zu schwach. Deswegen hat die Hauptspindel auch nur 1350 U/min. Die Werkzeugspanntechnik der Bohr- und Frässpindel war vor 30 Jahren mal aktuell. Für den Hobby- und Heimwerkerbereich gibt es für das selbe Geld andere, bessere Maschinen dieser Art.
That machine only has Morse tapers , the chuck shaft is a Morse #4. The drill / mill is a Morse #2 an the tale stock is a morse#2. There is no R8 taper... Those collet's won't fit
Never run an open chuck on a lathe. You should at least close them. Does the drill press also work as mill? Looks like a nice litle machine, depending on price.
CCP SHIT NOW DAYS YOU CAN'T DRIL ADAM HOLE CCP SHIT KILL-MAC-SHOPS GOT TO WHERE YOU COULDN'T EVEN DRILL HOLES -SPECIALY-400 435O HT TO DAM HARD TO BUY GOOD STUFF
MR .MIERZ- HAVE YOU EVER BEEN IN A MACHINE SHOP AN DO YOU KNOW ANY !!!! THING ON METAL AN FLAVORS--- THAT MEANS KINDS AN DO YOU KNOW ANY !!!THING ABOUT TOOLING TO YOU THAT MEANSTHOSE THING YOU WORK WITH
@@ricardomierz8467 YOU MAY -B -------BUT -------NOT A GOOD QUALITY EDUCATION IS DIFFERENT -------YOUR LIKEING IN THAT IT'S LIKE THE TOOLS ---YOU NEED QUALITY TOOLS -------COME BACK !!!!!!!!!!!!
The reason this puppy is so loud is the fact that the headstock has no oil in it. These machines are all shipped oil free. Oil does wonders when it comes to making those noises go away.
I've been looking hard and long at all the different made lathes. Some of these Milling lathes. This is what I've learned. Everyone says list open the box oh look this is how you turn it on, this is how you crank it this way this is how you crank it that way. It's extremely noisy the motors are no good because you're already upgrading and I can't think of any videos yet that I've ever seen anyone really showing the items making something great. So if it's a $2,000 machine it's already $1,000 machine Sirius and I am being kind when I say that. I honestly think everyone watches 100 videos. Then they go out and buy the lathes and repeat what they have seen.. maybe that's why on TH-cam 2 out of every 10 guys commit suicide after watching.
LOL at your comment. The noise is because of the changeable gear alignment in the back and the Manual Lead Screw Handle on the right is engaged. I've owned one of these for the last 15 years and those problems are an extremely easy fix. Just align the gears, a few cap screws and put the spring on the Crank on the other side. Someone probably assembled it wrong, easy to do. I have a few video of me running this machine, except mines silver, on my channel. Grizzly sells one of these for $2,450.00 plus $175.00 freight. Best wishes & Blessings. Keith Noneya
Roentgen Geiger: The noise you are hearing comes from simple things like the covers/doors rattling because of the thin sheet metal used for those parts. It is a common noise you will hear on most of these mills/lathes. The Smiths have a slightly different design for those parts which normally results in a quieter machine. We would not sell something like this if the bearings were bad.
@@MISIndustrial I think "out" in the previous comment was meant in the sense of "out of alignment" or "not of proper fit" and not that the bearing is actually worn . No-one expects a brand new machine to have worn bearings but badly fitted or badly specified bearings is not something unheard of.
i bought just the drill press about 40 + years ago still use 2-3 times aweek very good mach. i repaced the chuck a couple light bulbs one belt in 40 yrs (can not complain) all you hear is hum of the motor runing very smooth????????
This one is no longer available however here is a link to the current model we have available. www.misindustrial.com/product-page/m-i-s-industrial-mp800-multi-purpose-lathe-mill-3-in-1-combo-machine-smithy
It appears to be of quality construction.....but the milling head looks a bit cheesy and it looks like it was borrowed from the top half of a drill press..... Pretty silly......! 🙃
Just an upgraded version of my 20 yo chinese lathe/mill combo with power feed to the cross slide and one extra gear., I've put a 3 phase with VFD on mine to give infinite speed from about 70 to 3000 rpm with electric X and Y axis feeds. The only thing this has is a second motor for the mill. Mine is run from a bevel gear run by a dog clutch off of the main spindle.
I purchased on 2 decades ago. I am still waiting for Smithy to send me the correct chuck key. My 1924 Model T Ford is more reliable and runs smoother.
Those gears - especially when driving the slides does not sound healthy...
Yup, maybe some thick grease worked into the acme drive thread may take down the noise enough to be bearable. It looks very dry all over - lube needed all over when sitting or in use!
Those handles sureley could knock out some unwary machinists...
Those bearings sound hideous - both mill and lathe. Disassembly, burr removal, thorough cleaning and lubrication, replacing the existing bearings with a good set of needle bearings and tightening gibs will go a long way to perfecting this machine. I can say that it's already a cut above the basic Chinesium lathes that Horror Fright currently sells in its stores.
For a hobbyist machine, pretty well appointed.That said,(being a retired high-precision engineering professional)I cringe seeing anyone spin a self-centering 3-jaw ( or any )chuck with no workpiece clamped in it.Being brained by a jaw is decidely not funny.
I’m no expert but, it seems rather loud for a belt drive system. How much does it cost?
To fix?..
Beautiful & multi function
Or you prepared to sale it?
If yes how much your going to Change.
Beautyful Machine! Turn, mill and drill in one - I know this Combination-Features only from CNC-Machines! Very cool!
Driling is posible on any Milling machines as far as i know
But i do agree is cool u can turn also
I own one of these and used it for my hobbies over the last 15 years. It's a great hobby or beginner business lathe. It isn't very robust in that the motors won't run forever, I've had to repair them a few times. Other than that it seems to be acceptable for hobby work. This machine seems to be missing the spring item 166 for the Crank Handle Item 163 to manually use the lead screw. I mention this because when you engaged the lead screw auto feed the crank spun. When it has the spring properly installed the crank will not turn. An easy fix but one that should be looked at if your crank handle turns with the lead engaged. Thanks for sharing. Best Wishes & Blessings. Keith Noneya
Smithy is a brand name for another such machine, probably the same questionable quality. Harbor Freight sells Central Machinery, what is this machine really?
Bilo bi mi veoma drago da imam jednu ovaku mašinu. Međutim, cena je sigurno visoka za moja primawa. Uz mala ulaganja mogao bih da napravim brojna poboljšanja, postala bi savršena mašina.
I'd like to see all the functions put to realistic use?
From iraq my greeting
OMG, Bearings need replacing
IT DIDN'T SOUND LIKE BEARINGS SOUND LIKE ROCKS GRINDING UP PRISISION -MAC- DONT MALE THAT MUCH NOISE THEY QUITE--AN SMOVE IF IT DON'T SAY PRISISION DON'T BUY IT -SAME AS A DRILL PRESS
@@charlesborders2893 What did you say?..
@@ricardomierz8467 O--YES I FOR GOT TO TELL YOU THAT CCP IS CHINA AN CHINA IS CRAP !!!! SHIT !!! TO YOU THAT MEANS AINT WORTH A SHIT
I had one of these machines about 25 years ago, and they're generally ok for hobby work/learning. They have a HUGE capacity(which can't be utilised effectively, as the swing is FAR too large/machine lacks power and rigidity ie very tall tool-post assembly, excessive vibration, etc. Get the long bed variant with a screwed capstan riser. The mill/drill is ok, but the rigidity leaves lots to be desired, and forget climb milling!!!! I sold mine, three years after I bought it for the same amount that I paid for it, and it was a good tool for learning. BTW this machine sounds horrendously loud!!!
How much you pay?
@@JesusHernandez-lv4rx 25yrs ago I paid £1200 for a new machine with standard tooling ,3 & 4 jaw chucks.....
Great machines for learning with and should you spend the time increasing the rigidity, then it would be a good machine for small jobbing work - 225mm swing over bed is ideal for brake disc resurfacing, small cylinder head refacing.......
If you add a potentiometer to make it variable speed, I'll buy one.
Hello do this lathe make all thing you want big or small
Отличный станок. Я себе китайца взял и не жалею. Но этот комбо супер.
Of course its noisy when he deminstrates the highest speed and its on the boards on the floor sheet metal covers not steel ,And for the price ,and machining is done alot more slower and I see what others don't and challenges need to be met ,and you would be suprised what I would do with this.
Meine Empfehlung: Finger weg - nicht kaufen! Ich bin ausgebildeter Fräser und Dreher in der Metallverarbeitung und mache meinen Job seit 1985. An dieser Maschine sind die Antriebe veraltet, das Getriebe für die Drehbank hörbar schlecht, und das Hauptlager der Drehspindel ist zu schwach. Deswegen hat die Hauptspindel auch nur 1350 U/min. Die Werkzeugspanntechnik der Bohr- und Frässpindel war vor 30 Jahren mal aktuell. Für den Hobby- und Heimwerkerbereich gibt es für das selbe Geld andere, bessere Maschinen dieser Art.
What model brand is where I can buy. Thank you .
Never seen a combination lathe and mill worth having not a really good either and I'm sure that's why you selling it,,
Wish they sold this beauty
We have a shipment of brand new ones due in March or April. Keep checking in on our website.
That machine only has Morse tapers , the chuck shaft is a Morse #4. The drill / mill is a Morse #2 an the tale stock is a morse#2. There is no R8 taper... Those collet's won't fit
কেউ কি বাংলাদেশের আছো ভাই আমিয়ে লেদ মেশিন কিনতে চাই কিভাবে কিনতে পারবো কেউ যদি বলতেন
Muito bom quanto custa ?
if you need a mill and a lathe get them but if you need a combo of the two get a damn CNC and be done with it.
Is like all the companies advertised that products but never give any information about. We're you can buy it or how much is the cost. Bla bla
We have one and it does ok for use as a hobby and lite real work and work
It’s still a Chinese lathe. SLOW IT DOWN and OIL IT.
Never run an open chuck on a lathe. You should at least close them.
Does the drill press also work as mill?
Looks like a nice litle machine, depending on price.
I want this machine contact please
Harga berapa
Bbt
Why youtube consoring the search of the "mill lathe"?
STOP run away!
Such great hobby of mini lathe for nut and bolt project?
Please give me answer this
How many price
Muy buena maquina pero es de muy alto precio para mí. Nunca podría comprarlo
I have used many lathes. This is the loudest I have heard. It sounds like a train.
CCP SHIT NOW DAYS YOU CAN'T DRIL ADAM HOLE CCP SHIT KILL-MAC-SHOPS GOT TO WHERE YOU COULDN'T EVEN DRILL HOLES -SPECIALY-400 435O HT TO DAM HARD TO BUY GOOD STUFF
@@charlesborders2893 In what language are you writing your replys?
MR .MIERZ- HAVE YOU EVER BEEN IN A MACHINE SHOP AN DO YOU KNOW ANY !!!! THING ON METAL AN FLAVORS--- THAT MEANS KINDS AN DO YOU KNOW ANY !!!THING ABOUT TOOLING TO YOU THAT MEANSTHOSE THING YOU WORK WITH
@@ricardomierz8467 YOU MAY -B -------BUT -------NOT A GOOD QUALITY EDUCATION IS DIFFERENT -------YOUR LIKEING IN THAT IT'S LIKE THE TOOLS ---YOU NEED QUALITY TOOLS -------COME BACK !!!!!!!!!!!!
@@charlesborders2893 TH-cam for some reason is pulling all my replys to you..
But the Bottom line is that your a inbred moron.
Hi what will it cost for the unit and postage to Melbourne australoia thanks
Since lathe operations and drilling opeations would not be simultaneous, single motor should be adequate.
Boa ideia nunca vi um torno desse modelo parabens
The reason this puppy is so loud is the fact that the headstock has no oil in it. These machines are all shipped oil free. Oil does wonders when it comes to making those noises go away.
Thanks for stating that... saves me asking the pressing question that haunted me through the entire video!
It's not a new machine, it's a used machine. IT SOUNDS VERY LOUD & SHOULD HAVE OIL IN IT IF IT'S A USED MACHINE.
Mine was shipped with oil in it ! I checked before running it.. it's loud because it's very cheap made !
I need one to the Mexico Mexico hamach
You can pretty much get anything online to get ship to any part of the world.
I've been looking hard and long at all the different made lathes. Some of these Milling lathes. This is what I've learned. Everyone says list open the box oh look this is how you turn it on, this is how you crank it this way this is how you crank it that way. It's extremely noisy the motors are no good because you're already upgrading and I can't think of any videos yet that I've ever seen anyone really showing the items making something great. So if it's a $2,000 machine it's already $1,000 machine Sirius and I am being kind when I say that. I honestly think everyone watches 100 videos. Then they go out and buy the lathes and repeat what they have seen.. maybe that's why on TH-cam 2 out of every 10 guys commit suicide after watching.
LOL at your comment. The noise is because of the changeable gear alignment in the back and the Manual Lead Screw Handle on the right is engaged. I've owned one of these for the last 15 years and those problems are an extremely easy fix. Just align the gears, a few cap screws and put the spring on the Crank on the other side. Someone probably assembled it wrong, easy to do. I have a few video of me running this machine, except mines silver, on my channel. Grizzly sells one of these for $2,450.00 plus $175.00 freight. Best wishes & Blessings. Keith Noneya
Need 220/240 Volt machine, and shipping to Africa. How that works?
eu gostaria de saber o preço se estaria em minha condição
I take it this is a prototype but...You can hear something is not running smooth...should be checked. Great machine tho..
La ce preț este.
👍👍👍
How much u wants for all dat.😮
How many price
ممكن سعر والعنوان او الرقم هاتف
Muito bom 👍 forte abraço de nós do CANAL FERREIRA MOTOS 👍
Sir tell me Company nem model number
How the price
How the google
@@Mile-long-list how indeed
How you do?
Gostaria de saber o valor dessa máquina ou se vendem essa?
Is the drill head strictly for drilling, or can you do light milling with it?
These can definitely be used for milling. It is technically a milling head which any milling head can be used as a drill press head as well.
Hi
very noisy machine..
🌹🌹🌹
CUANTO VALE LA MAQUINA
!!!.
Bộ này giá bao nhiêu vậy anh bạn ơi 💖💖👍👍
Anh chị cho em hỏi máy này có giá là bao nhiêu tiền ạ
xin cho biết giá và sơ ĐT liên hệ.
Well, the main bearing is out or what ? Have you heard a Smithy running. No such noise !
Roentgen Geiger: The noise you are hearing comes from simple things like the covers/doors rattling because of the thin sheet metal used for those parts. It is a common noise you will hear on most of these mills/lathes. The Smiths have a slightly different design for those parts which normally results in a quieter machine. We would not sell something like this if the bearings were bad.
@@MISIndustrial I think "out" in the previous comment was meant in the sense of "out of alignment" or "not of proper fit" and not that the bearing is actually worn . No-one expects a brand new machine to have worn bearings but badly fitted or badly specified bearings is not something unheard of.
Price
كام السعر لو سمحت
This is a serious tool??
How much price
i bought just the drill press about 40 + years ago still use 2-3 times aweek very good mach. i repaced the chuck a couple light bulbs one belt in 40 yrs (can not complain) all you hear is hum of the motor runing very smooth????????
How much as is
Rate please
SOME DAY
Traduire en français
Price
مساء الخير...اخي العزيز اني محتاج واحدة مثل هاذي المكينة للخراطة...كم السعر مع التوصيل للعراق....وشكرا لك...⚘🌹🌷👍
How much is the Idlib link in the north of the liberated Syria?
how can I get from Bangladesh?
Sorry this machine is sold.
O_O I would like this in the workshop.
You should say what a range of pricing is, even if the machine is sold. {Then, we know about how much to budget-for to get its sister/brother ;) }
Jack, I appreciate the interest. This one was around 2k.
How much is the cost with the all accessories ???
This one is no longer available however here is a link to the current model we have available.
www.misindustrial.com/product-page/m-i-s-industrial-mp800-multi-purpose-lathe-mill-3-in-1-combo-machine-smithy
It’s a nice little machine, alot of nice tooling with it.
Please tell about price in india and how can i buy this
Muito topp
What is price
Thanks from an old German machinist.
I want one
It appears to be of quality construction.....but the milling head looks a bit cheesy and it looks like it was borrowed from the top half of a drill press..... Pretty silly......! 🙃
Hermosa herramienta donde se compra?
dam nosie machine.
Lol...😁
Dont give up your day job😎🤣
Very very god machine
Это на продажу? Сколько стоит?
Brother, how much does it cost
Eu quero comprar uma maquina igual a essa - só não sei onde procurar .
Wiertarki stołowe
how price is this machine
www.misindustrial.com/product-page/m-i-s-industrial-mp800-multi-purpose-lathe-mill-3-in-1-combo-machine-smithy
How much this machine
www.misindustrial.com/product-page/m-i-s-industrial-mp800-multi-purpose-lathe-mill-3-in-1-combo-machine-smithy
Just an upgraded version of my 20 yo chinese lathe/mill combo with power feed to the cross slide and one extra gear., I've put a 3 phase with VFD on mine to give infinite speed from about 70 to 3000 rpm with electric X and Y axis feeds. The only thing this has is a second motor for the mill. Mine is run from a bevel gear run by a dog clutch off of the main spindle.
how much this model sir? thanks
How much sir.