Creating and restoring a recovery drive (Windows 11)
ฝัง
- เผยแพร่เมื่อ 18 ต.ค. 2024
- This time, we will summarize how to create a recovery drive in Windows 11 and how to restore from the created recovery drive.
Windows may become a point of concern due to trouble, and in most cases you can recover by going back to a restore point, but in cases where the Windows system itself is partially broken, you will need to restore from the recovery drive. It becomes.
In the past, recovery drives were mainly created using DVD drives, but recently, large-capacity USB flash drives have become cheaper, so it's worth taking the time to ensure your peace of mind.
Notes)
・Avoid immediately after updating Windows Update
・If the transition time to sleep is short, temporarily extend it.
・Remove external HDD and SSD drives (to prevent accidental operation)
・Sign in with an administrator account
・Connect the AC adapter to your notebook PC, etc.
・Turn off BitLocker
(If you create a recovery drive with BitLocker on, you will be asked to enter the recovery key)
When you restore from the recovery drive, if you are signed in with a Microsoft account, you will need your Microsoft account email address and password to use it in the same environment as before after following the steps. Before proceeding, be sure to write down your Microsoft account email address and password.
(Procedure summary)
0.Preparation work
・Prepare a 32GB or larger USB memory (blank USB memory)
・Turn off BitLocker (system drive encryption)
・Start Menu - All Apps - Windows Tools Selection
・Start control panel
・System and security
・BitLocker drive encryption
・Disable BitLocker
・Confirm - Disable BitoLocker
・Turn off the transition to sleep
・Adjust the valid time so that Windows Update does not run.
1. Create a recovery drive
・Start Menu - All Apps - Select Windows Tools
・Start control panel
・System and security
・Security and maintenance
·recovery
・Create a recovery drive
・Follow the wizard
Back up system files to recovery drive
Make sure it is checked
・Insert the USB memory by connecting the USB drive
Check that it is displayed as an available drive.
·create
·completion
2. Restore with recovery drive
2.1 Reverting the system drive to a restore point
*Boot settings from USB memory (this differs depending on the model, so please refer to the manual)
・Boot from USB
・Keyboard layout selection → Microsoft IME
·troubleshooting
・System restore
・Windows11
・Follow the wizard
*Try restore points in order of newest date.
·Reboot
2.2 Restoring from the recovery drive to the point in time when the recovery drive was created
・USB boot
・Keyboard layout selection
・Recover from drive
Only delete files
·recovery
2.3 Initialize with recovery drive
・Boot from USB
・Keyboard layout
・Recover from drive
Completely clean the drive
·recovery
ーーーーーーーーーーーーーーーーーーーーーーーーーーー
Music title is Hi Bob Create by OrangeMaker
-----
#Recovery Drive #Restoration from Recovery Drive #Windows #Windows11 #Installation #OS Backup #Restore Point
この機能便利ですね。
回復ドライブで同型に機種ならアプリやらアクティーべーションされたまま引き継げる。
事実上のコピーが出来てしまう。
32GBで足りますかね?300GBとか必要になりません?
すいません。誤解されたかもしれません。
回復ドライブで救えるのはOSだけです。
アプリやデータは、回復ドライブに保存されません。
説明が紛らわしかったかもしれません。
丸ごとのコピーは、クローン系のソフトが必要です。
コメントありがとうございます
OSが操作不能になることは想定してないんですが、特定のポイントに復元したい場合は回復ドライブを使うのがベターですか?
あ、復元ポイントというのがあるのですね。
そうですね。
復元ポイントの設定は、ショートでやってまので、
宜しければ、ご視聴ください。
まあ、いずれにせよ、Microsoftが守るのはOSだけです。(笑)
いつもコメントありがとうございます。
2台の物理的なPCがあって、片方のPCの仮想PC(hyper-v)と片方の物理PCを同じLANグループにしたいんですけど、一番簡単なやり方ってどんな感じでしょうか?
最近Hyper-Vを弄ってないので。
記憶になりますが、
物理NICにブリッジした仮想Switchを作成すればできませんか?
コメントありがとうございます。
回復ドライブ作るときパソコン側が3.0・USBメモリ3.0だと稀に失敗するので、パソコン側の2.0に接続するかもしくはUSB2.0のメモリを使ったほうが良いかと思います。
回復ドライブとWindows11システムイメージバックアップを取っておけば新規SSDにシステムを復元出来ますのでクローンソフトは必要にいですね。
情報コメントありがとうございます。
これからも宜しくお願い致します。
@@OrangeMaker777 Windows12でWindows7システムイメージバックアップが使えなくなるような噂を聞きました、使えなくなったら他のバックアップソフトを探さないとですね。