2021 Yamaha MT07 w/ Akrapovic Exhaust ECU Flash + Dyno Tune at Moore Mafia
ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2024
- This 2021 Yamaha MT 07 came in for a dyno tune at Moore Mafia, what do you think of the sound?
Get your ECU Flashed by me.
Call me at 864-608-0119 or www.mooremafia...
Moore Mafia Drag Racing School
www.mooremafia...
Moore Mafia Merch
www.mooremafia...
See some of the performance products we have at:
brocksperforman...?aff=3
ENTER DISCOUNT CODE MooreMafia5 for a Special Discount!!!!!
To have us make your bike go fast like ours. Just call me
864-608-0119 Tuesday-Saturday 9am-6pm EST
Click this link to get 10% off your Chin Mount
chinmounts.com...
Use CODE MOOREMAFIA10 @ checkout
Click this link to get 10% off your Dragy
dragymotorspor...
Use code MOOREMAFIA10 @ checkout
Follow us on Instagram
@chrismooremafia
@bigkountrymooremafia
Tik Tok
@mooremafia
Good gains you'll notice 90 % of the time. Bike obviously has small cams for mid-range and making it easier to get through emissions tests. For anyone wondering, r7 and mt07 engines are exactly the same - the twins racing series bikes have cams and a fair bit of tuning.
I'd also suggest an R6 throttle tube about £20 direct from Yamaha. The standard R7 is very long action at the twist grip. It's made a big difference on the one I tried.
@@shadowred1980 I might try that .. The aftermarket does not make a shorter travel throttle for the MT-07.. I never thought about trying one from an R-6. I really have not worked on throttles for a long time. My Buell Manual says to disassemble and add some graphite powder once per year. Sounds like a good idea.
I installed heated Grips on my FZ-07 one year ago. I am thinking it would be difficult to change throttled tubs now without destroying my heated grip ..but since I have not taken many apart I am not sure if my concern is true or not.
Yes the wrist action is way too long of a twist on the manual throttle MT-07. Also the FZ-07 has too narrow of handle bars. The MT-07 has wider bars.. but my cables and brake lines and clutch cable are already stretched to the max do to the fact that I added 2" risers to make up for my short arms..
Lovely tune. These bikes are super fun around town. Numbers only don't do the justice. Awesome raspy sound from the twin banger too!
I can attest to MM ECU flash. It turned my '19 MT-09 into a Monster! Good Lord mode A is scary!
Mode a? Can you explain this to me I have a 2019 but never knew anything about mode a
@@alexcardenas3206 Your mode button on the right near the throttle, all the MT's have mode selection of some type. I can switch in this sequence from A to Standard (Std) and B mode. I had Moore Mafia flash to where B mode is for wet/mild conditions, Standard for all around riding, and A mode for 100% throttle at set RPM points. I believe MT's that are newer than 2019 the mode acronyms might be different.
That little twin makes some righteous noise w/that exhaust system.
The CP2 Yamaha really benefits from a DNA intake system, or at the very least a Sprint filter. The intake area on these bikes is restricted.
I've done a ton of research on the Sprint filters after installing 1 on my Zx10 and not really telling and difference at all so I got to doing my homework and learned that unless ur also doing velocity stacks that the filter don't change much but I tell u after getting some stacks installed what a huge difference that combo made
@@ALDA2479 That could be the case on a racing bike designed with ram air and wind tunnel work. The MT-07 draws air from under the seat, the stock airbox and intake system is quite restricted. DNA makes a replacement system (not merely the element) which flows much better.
Some bikes have incremental gains. Some bikes have large gains. It's all in the original design. Take the 1290 KTM for instance and the success that Rottweiler Performance has with their air intake replacement kits. There's no universal rules with air filters and power restoration, it's on a case by case basis.
DNA any time😉🏁
could have pulled the snorkel part off it does benifit abit without it on the airbox lid
The DNA filter is a waste of money on the MT07, you need to remove the whole air box in order to make a difference on the MT07
Love the throaty 2 banger sound with that Akrapovic Exhaust. Has to be 10 times better than stock.
Agreed, thats a head turner 🤌
Not much gain but improved drivability and response, on top of that Air/Fuel mixture correction? I'll take it!
MT-07's? Not many.....but I know a lot of people with R7's that are racing them here in SoCal. I forwarded this video on. The middle weight twins is a big class in MotoAmerica.
Peak power may not be worth bragging about at your next bike night parking lot but riding it the power is everywhere you’d need. Obviously not a race bike but it’s more than enough to have a great time on the street. Also considering mine made 63hp bone stock and a worse powerband, the changes from that ecu flash are night and day different and it’s all useable power. All the power is where you’d want it on a bike like this and honestly is more than most street riders know how to use outside of a straight line. Uncork the airbox and you’d seen even more gains through the entire rev range.
I believe the mt07 stock dynos at 67 HP so you got 3 HP at the wheel that's pretty good
Stock is rated at 75 at the crank so you might be over 80 at the crank now
I'm not an expert on this of somebody knows how to describe a better please do so
(edited voice to text mess up)
I NEED to see what you can do to a Rocket 3 and then before and after drag run results!
Please get a 2018+ CB1000R ECU Flash on your channel. I’ve gotten my 2019 CB1000R flashed by you guys👍🏻
Those factory soft forks are death trap
Belray 20wt fork oil is cheap.
Have you done a 2022 ninja 650… it’s not a top of the line fast bike but I have one and will send my ECU to you
I never had the check engine light problem when unplugging the ECU on this bike, never powered on the bike without the ECU installed though.
Wow, the exhaust sound is what I need. I have this same bike but stocked everything. Rides nice as it is but man I be just a tiny bit cooler with this exhaust.
it way better with that exhaust i have the same one on my bike, before she was running hot like 90 plus stock now rarely passes de 82 celsius
@@pedromartins-cm1vn I have a black widow full system, sounds amazing and ive also noticed the temps are lower too
So with the exhaust and no tune the bike was already running low 13's at WOT?
So that means it's just at part throttle the bike was running lean then?
The before and after flash WOT AFR didn't actually seem remarkably different.
I noticed the same. The AFR doesn't seem too much off except during sudden declaration (letting off the throttle)
@@georgiospergeris6146 sudden declaration (letting off the throttle) always displays off the chart lean on any bike with any tune because the sensor is still trying to measure while the engine isn't really producing anything measurable.
@@__Max-oe6zm Do you need an ECU for the mt07? (Considering getting the same exhaust for my 2024 model) / Will it run lean? OR not run lean enough to damage the bike?
@@MrMT.07 It's not a massive deal on these bikes, but it's worth getting a tune eventually.
Since the CP2 engine is not really that restricted from factory, what are the benefits of disabling the O2 sensor for this bike? So does that mean that when you disable the O2 sensor (on any bike) the engine will always run on Open Loop mode? Thanks for the video. It is nice to see practical bikes being dyno'ed and to see the ECU parameters they have.
You disable the 02 so the bike doesn't correct the afr back to factory and stays at what the tune parameters are
@@ichista thanks man but what if there is no tune...will the ecu just stay on open loop?
@@ManCannotRide it will default to a richer condition to protect itself from running lean. You’ll end up with less power too.
@@JRodSMX Got it, thanks man.
holy shit i never thought that the new mt07 had right side up forks.
Yeah, and they are soft as heck in stock form.
I have a 2015 BMW K1300R has shorter diff ratio than S model, don't think America gets the R, fitted Arrow muffler only and live in Australia, have you dynoed one (probably not) or know anyone like Brentune in Victoria Australia, luv your work.
I have the same bike and same exhaust. Sound could be better imo. Sounds more like a scooter than a motorcycle. I really thought about sending my ECU in to you
If I put on my 07 full system Akra exhaust and k&n open filter, it’s critical to dyno/flash it ??
I have this same motorcycle in a 2019. Its a great bike and fun with an exhaust. Needs some tuning though and a comfort seat.
I have the exact same bike, with a power commander and the same exhaust with the accent blue steel braided brake lines. I've been thinking about getting the ECU flashed because the throttle is hurky jerky, know what I mean. But this bike is a blast to ride. Take it to the track all the time, even pass ducaties (on the turns).
My check engine went off sfter the second crank up. Mine made 78 from 2wdw
Hey Chris! Just recently ran into your channel and love the content and the tunes you guys are doing, you have me convinced! One question, since I am soon buying a bike, as I am from Europe (Romania), am I able to ship my ECU to you guys for tuning? I would love to get a tune from you guys since it is SO HARD to find a good tuner in Europe in general, but especially in Romania :( .
Chris works with Woolich Racing software. Check out Woolich Racing Europe for your nearest tuner
Nope. Different gas….
@@dbtrackz33 We just use different rating systems, pump gas is still the same.
@@Emily-ou6lq Thanks, I will look into it but hopefully Chris can reply as well, might send them an e-mail as well.
@@cartof123 check woolichracing, under their contact page you'll find the email address for the eu.
My R1 ecu costs 1800€ new and is not available anymore. So I'm certainly not gonna send it around the world, insured for max 500€....Fyi, ThornBike in France is the main central distributor for BeNeLux and of course France.
I have the dna intake and a yoshi full exhaust on my 2021 and after having it flashed my check engine light went off after a few minutes riding it
The dyno doesn't figure in the weight loss of the bike also when changing the pipe. Less weight = faster acceleration.
Very true. The stock piping was about 17lbs heavier than my Akra carbon
do a snorkel delete
wonder how much better a R7 does on the dyno....
With the same mods they'd be no different. Engine configurations are identical between the two bikes
Chris man truly what Naked Bike is your Favorite Overall like it’s Really and Truly All Around Great and Sounds Right?
Hello. I have a 2021 model mt 07 vehicle.
When I start the engine it sounds like the cam chain is rubbing. Is this normal?. When you start the engine for the first time, pay attention to the noise coming from behind.minute (2.56-3.00) I hear the same noise. What is the reason? I would be grateful for your help. Thanks.
the mt07 has some throttle body restrictions and air box restrictions you need to change. i bet with an open filter & airbox you can get more gains
very close to a ninja 650 as well. only a couple hp different but the mt07 has a bigger engine so it makes up for it. but overall, you cannot go wrong with the new styling of the mt07
Its a two cyl too bruh
I got an Mt 07 too
Hey guys, i have a 2021 mt07 with a full akro titanium exhaust, bigger intake, derestricted and full tune.
If i was to remove the db killer, would it need to be retuneed/is it safe to ride without doing a retune on it.
Question for you sir. How close will my 22 14R with the flash for Brocks dual CT exhaust with sprint p08 to streatable running with pair blocking cap inst? Will there be any talking on decel for this bike exhaust combo or no?
can u de-restrict from 35 kw to 55 kw by flash tune? I was asking Yamaha dealership if they can open it for me (Europe regulations) and they said that it's not worth it because it's locked by ECU soif i wanted to unlock it i would need a new ecu and that is not worth it. they said it would been better to sell it and get a different one but i kinda like my mt :D
I Chris, how can I get a flash drive off you for the Land Yacht, Suzuki Boulevard M109R to stop the full on full off jerky throttle?
Go to his website. He has the instructions for how to remove the ecu and ship it in. He just did a flash for the 109r a few months back. Had some huge gains and fixed that jerky on off issue.
So I just got one for my first bike and I thought I was doing something wrong with the on/off throttle. Good to know it’s not just me 😂
My check engine light went away after a couple rides
My Check engine light went off after a couple cycles after flashing it! I didn’t have to get the codes cleared. I have FTECU!
Did u flash the ecu yourself ? Or where did you send it to get it flashed ?
should of pulled that snorkel off the airbox lid cover
Yamaha also has an air filter restriction, after changing air filter and exhaust it's gain around 78HP, with tuned ecu
Great vid Chris always big supporter Sky Champion on Powamoto so I brought all these thumbs ups for ya algorithms fam 👍👍👍👍👍👍👍👍👍👍👍👍🚀👈👀💃
Bro your TH-cam must got hacked keep getting messages from you lol im probably not the only one 😂
theyre fake accounts look closer
Its fake bro , I get em of alot of the people in subscribed too, jus ignore em 👊😎
just report them. same shit on the 650ib channel
You could at least once analyse the 'quality of of the exhaust fumes' with and without ecu-flash while running a bike on the dyno? I bet, 10% more torque in mid range come with 300 or 500% 'more bad quality for the environment'. 'If i want to be good to the environment i dont flash' - true or false?( And how could an 'eco-friendly ecu-tuning' look like? Maybe there is a market for that?)
Typically if you make more power you had a more efficient fuel burn, not always the case as with the increase in fuel usage etc, but the emissions aren't always going to be increased by a more powerful engine. All depends on how you're managing the fuel and spark, how the pressures are in the combustion chamber (compression/boost), air flow, etc etc
What are you basing that on? There's no way emissions would be 3-5 times worse just from tuning. Disabling dfco, changing timing, changing afr... can have an effect but, unless you're physically changing parts, I don't see emissions getting considerably worse.
Also chris have in mind mtz 07-09s all gens have a very good map from factory thats why the gains are low... Good job once again brother
How about breaking in the engine? How does that work when you tune a new bike?
Once I get the DNA filter and cover for my R7. I have the Akropovic full go exhaust system once I send you the ECU to tune will I have to refine once I get a quick shifter?
Tuned with Stock air filter ? Hi guys, wanting to know if Should I leave it the air filter stock or put K&n or DNA(which one is better), but do not want to remove the snorkel.. doing tuning soon with full exhaust.. Thanks
Asmr Akrapovic ❤❤❤
Factory 🏭 exhaust is best
This guy should have done more research and done the airbox mod and a filter. Another 3-5 easy….
Aprilia 660 version has HUGE intake and throttle bodies. And makes much more HP.
That's a sports bike lmfao
And only costs $5000 more 🤣
Whazzup GaiZ I talk like a youtuber now
Why you didn’t post for darlington
Hey brotha , what would it cost me to bring my 19 mt-07 up to you and have a dyno tune done?
Your mic is not happy
Does anyone of you know if the quickshifter of the r7 fits on the 2021/2022 mt07?
No it won't fit.
@@spiffanator doesnt have the plug for the qs?
@@01Pascal01 BN6-E81A0-V0-00: R7
BS2-E81A0-V0-00: MT-07
Idk if the part number don't match up it's been my experience that it doesn't work out. You can try it but to me it looks like it won't work.
@@spiffanator last partnumber is only for the 900 engines unfortunately
@@01Pascal01 ah. It appears so. Well I'm just taking out my ass. Ignore me.
Does the code keep popping or is it a one time thing?
I asked on another vid and never got a reply back, but does any company make an exhaust that isn't restrictive but also isn't intentionally loud? I know it goes against the 'culture' but I don't want anything to do with a loud bike. I'm not an asshole that likes to annoy my neighbors when coming and going. I don't need to draw attention at stoplights and what not. But I would like a better performing bike when it comes to riding. Any suggestions on the exhaust system for that?
Hey Chris, Wow 5 months no response from anyone well the first company that comes to mind is yoshimura also most exhaust manufacturers usually include a baffle which reduce the decibels drastically. I hope this helps good luck.
Hey Chris, Wow 5 months no response from anyone well the first company that comes to mind is yoshimura also most exhaust manufacturers usually include a baffle which reduce the decibels drastically. I hope this helps good luck.
Which bar end mirrors are those?
My name is chase almond I have a 22 Mto7 stock should I get it flashed or dyno tuned
They really are made for flashing and full exhaust unless you don't want to commit the bike fully
MR.C just sent you a text message...
👍💪🔥
Clearly, the Japanese know how to design an efficient exhaust system
Do you even need to tune with a different exhaust?
You should. The fumes get to you after a while and you notice a loss in power. You can sound cool but will be slower.
Weed out the scammers messing up the channel
👍🏽🇺🇸👍🏽
✌😎💪🇺🇸
Please change your voice 😬
ITS REVS PER MINUTE.
americans loves to add an S on the end of RPM. Its sounds so dumb man. Its RPM revs per minute not minute's
How do I make my mto7 have pops and bangs setup/tune
SV 650 Might be a better option , then .
I doubt it
I installed akra full exhaust just like that on my 2018 mt07. Did not tuned it. Is it still ok to run with factory tune plus akra exhaust? Wont hurt the engine?
Same here getting my tuned next week, do I have to? idk
Pops and bangs an option for the mt07?
Can you do 2019 sv650 please 🙏