It really is man! So stoked that my giveaway has made you into an enthusiast Richie 💯 Keep in touch and let me know how you’re progressing! These wheels are like having the softness of the clouds, with a wider contact patch and more grip. You might like them. Thanks for watching! 😃👍🏻
⚡ *Maaad wheels* ⚡ Love urethane street wheels, usually 85mm wheels but I like the 105s a lot!! 65mm wide but about 43mm Contact Patch, keeps them nice and nimble.
Excited my n1 i just ordered has these and the air tires!!! I have the cloudwheel rover 110r on my s3 and those are ok but will be interesting to explore new feels
Did you remove the bearings that came with the Boardnamic pulleys????? And just used the Zealous w/ built in spacers on all four????? I really wish people would show how they installed these without skipping important steps like bearings and spacers.
There were already bearings in the Boardnamics pulley's, and I used what was already there for them. The wheels didn't come with bearings, so I used the Zelaots in them. If you watch that part of the video, it's pretty clear...even without me specifically saying so. I showed them as I received them, and then showed what I installed in the wheels. Thanks for watching! 😃👍🏻
@@VaporTrailChannel So for the rear you used the included and then a zealous? You didn't use any additional spacers or the included + a zealous on each side right? (similar to the front) (sorry new to this!)
@@SteveLord ok, now I understand your question. The boardnamics pulleys come with two spacers per side that go on the axle before the pulleys/wheels. I thought I had shown that, but I haven’t watched it in a while. Thanks for watching! 😃👍🏻
I actually asked Brian, the owner of MadESK8. Here’s what he said: “The holes almost go most of the way through the wheel. If the holes were about 1cm longer, they would go through the outer wall of the wheel”
Going from 90mm poly to the 120mm cloudwheels was like night and day. I'm sure these are great for someone that's into carving
It really is man! So stoked that my giveaway has made you into an enthusiast Richie 💯 Keep in touch and let me know how you’re progressing! These wheels are like having the softness of the clouds, with a wider contact patch and more grip. You might like them. Thanks for watching! 😃👍🏻
⚡ *Maaad wheels* ⚡
Love urethane street wheels, usually 85mm wheels but I like the 105s a lot!!
65mm wide but about 43mm Contact Patch, keeps them nice and nimble.
Killer dude! Thanks for watching! 😃👍🏻 and thanks for the support
Should add threadlock on those pulleys screws as Bibration will get them loose over time. Nice Video
Yea, Loctite is a good thing. I do check my gear often before I ride. Thanks for watching! 😃👍🏻
Excited my n1 i just ordered has these and the air tires!!! I have the cloudwheel rover 110r on my s3 and those are ok but will be interesting to explore new feels
I think you’ll be very happy with them! Thanks for watching! 😃👍🏻
love these wheels
Me too! Thanks for watching! 😃👍🏻
Did you remove the bearings that came with the Boardnamic pulleys????? And just used the Zealous w/ built in spacers on all four????? I really wish people would show how they installed these without skipping important steps like bearings and spacers.
There were already bearings in the Boardnamics pulley's, and I used what was already there for them. The wheels didn't come with bearings, so I used the Zelaots in them. If you watch that part of the video, it's pretty clear...even without me specifically saying so. I showed them as I received them, and then showed what I installed in the wheels. Thanks for watching! 😃👍🏻
@@VaporTrailChannel So for the rear you used the included and then a zealous? You didn't use any additional spacers or the included + a zealous on each side right? (similar to the front) (sorry new to this!)
@@SteveLord ok, now I understand your question. The boardnamics pulleys come with two spacers per side that go on the axle before the pulleys/wheels. I thought I had shown that, but I haven’t watched it in a while. Thanks for watching! 😃👍🏻
@@VaporTrailChannel Thanks I just figured it out myself after noticing the pulley was scraping. Whew.
@@SteveLord I’ll try to be more mindful of that type of thing in future videos 💯
How deep into the wheels are the 12 holes?
I actually asked Brian, the owner of MadESK8. Here’s what he said: “The holes almost go most of the way through the wheel. If the holes were about 1cm longer, they would go through the outer wall of the wheel”
Hollow wheels 🤙🏻✌🏻
I’ve heard great things
Staying dry? lol North Carolina is flooded!
Yea, western NC is jacked. We are fine on the coast. Thanks for watching! 😃👍🏻