Dynacord SONICUE Sound System Software - Creating Custom Speaker Presets

Arthur from ‪@DynacordOfficial‬ gives you the tools you need to create a custom speaker preset using the SONICUE sound system software.
Find out more: products.dynac...
Equipment used in our videos:
Sennheiser AVX Wireless System - bit.ly/3xDxf0M
Roland Pro AV - bit.ly/36BuSjb
CHAUVET DJ Freedom H1 - bit.ly/36vEkVh
CHAUVET DJ CAST Panel Pack - bit.ly/3AVVcm3
#dynacord #sonicue #loudspeakers #proaudio #livesound

[@normcurtis3689]

Very helpful. Thank you.

[@LionelCorreia-s6x]

Thank you for this video. I did every step as you instructed. But in Sonicue, after I upload the preset to the Passive Speaker, I cannot link it to the amplifier channel. What could be the problem?

[@LionelCorreia-s6x]

This is very helpful. Thank you for this video. But I am facing one issue. I did everything as you instructed. But when I get into Sonicue, after I upload the preset into the passive speaker, I cannot link the speaker to an amplifier channel. What could be the problem?

[@dexxnik]

You didnt say anything about set ohm for limiter

[@dexxnik]

And this limiter is strange, its calculated 69 volts for 600w and 4 ohm but dynacord 1300fd is 56 volts max

[@LeisuretecDistribution]

Hiya! I believe 55.3v is the RMS voltage, not the peak. So the maximum voltage from the amp is more like 79v. I hope this makes sense :) - thanks