I just picked up a 2016 F150 in excellent condition. The last thing I want to do is drill holes in the truck to install a traditional antenna mount for my HAM radio. I discovered this BulletProofDiesel mount after a little research and decided this is exactly what want. You did an excellent job showing how to install this. Thank you, great video!
Just purchased. Can’t wait to put it on my ‘19 F-150. Mine did not come with an antenna for the other NMO mount. Waiting to get both of my antennas in before I mount.
Just installed my antenna mount today. Your video really helped with the installation on my 2024 Ford Maverick. The light connector was a bit different but still easy. Tomorrow its the radio installation. Should be easy as my battery is under the rear seats where my antenna wires are now placed. I noticed the cabling was manufactured by DX Engineering. I assume they partnered up with Bullet Proof Diesel. Impressive! Great job!
Did you ever put an SWR meter on the GMRS side? I also have a ham radio setup in my 2015 F150. Due to having an ATAS-120 on the front driver side quarter panel area and a dual band vertical on the front passenger side quarter panel I'm short on space for a GMRS antenna with good ground.
@@DIYRAY Already done. Have you done any range testing with your GMRS radio? I own a 2015 Ford F-150 and since it is mostly aluminum I have been looking for a way to install a decent GMRS 2 way and maybe a HAM 2 way. Your video brings hope to my problem. Keep up the positive work.
@@ldean2832 my range is very good. I’m able to hit my clubs repeaters a few miles away from my house also having the antenna at its highest point help with reception.
Great video. I'm leaning towards this mount, but I"m still not sure I'm willing to drill into my truck. Looks wise, this is exactly what I want, plus it gets the antenna higher. What is the bracket you have your radio mounted to? Looks like a good way to mount the radio to me.
Hi..thank you for making this video - will attempt the same installation on my 23 SD Tremor. Can you advise how your routed 12v power from the battery to the radio's behind your back seat?
Thanks for your comments. Please watch the videos short on my channel on how I install my radio. Good luck 🍀 and please remember to subscribe and like the videos.
I want that same GMRS radio, I have the same Builtright industries molle panel which i never used so I'd like to put the radio there too, how are you extending the handheld?
I was told you shouldn't roll your extra cable up, cut and shorten or run through your vehicle. Have you found and loss from it being rolled us as you showed in video?
Very clean install. I have the single antenna version on my truck and i love it. It is super clean and an amazing look for the truck. What is that rack you used to mount the radios to behind the seat? I have an f150, not sure if it would work, but would like to research 🤔
Thanks for your comments. Please read the information listed in the description below. I believe I listed it. If not let me know. Please remember to subscribe and like.
@@RP-ks6ly Yeah, God blessed me with the opportunity to buy some toys for myself. You can’t take it with you when God calls you home. So enjoy the gifts the Lord has given us and give honor and praise to the heavenly father.
I just picked up a 2016 F150 in excellent condition. The last thing I want to do is drill holes in the truck to install a traditional antenna mount for my HAM radio. I discovered this BulletProofDiesel mount after a little research and decided this is exactly what want. You did an excellent job showing how to install this. Thank you, great video!
Thanks for your comments. It’s expensive but worth it. Buy once, cry once.
Great video. You got right into it, no 30 second video lead in! No nonsense and very informative.
Thanks 🙏🏽 for your comment.
I was just about to install my radio in my truck when I saw this. Outstanding, sir.
Thanks 🙏
Clean setup,going to get this for my F250 so I can install 2 way radio.
Excellent video. Been looking for a clean install on my f250 Ty for making this video.
Just purchased. Can’t wait to put it on my ‘19 F-150.
Mine did not come with an antenna for the other NMO mount. Waiting to get both of my antennas in before I mount.
That manual is awesome! Detailed with pictures, and like you said, you don't see that anymore.
Thanks 🙏🏽
Those mounts look great, I wish there was an option for my truck.
Thank you, based on this video I purchased & received this same bracket for 2022 F250. will be doing the exact same install.
Thanks for your comments and please remember to subscribe and like the video.
That is a clean look! Thanks for sharing.
Welcome 🙏🏽 thanks for your comments.
Nice installation Ray! Very happy to see a guy still using hand tools. #OldSchool
👍🏽
DIY RAY - can you share what antennas you used? Would love to see a video on those and your radio setup inside of the cab.
Very nice demo, pricey it is, but it’s the best option out there, love the video🙋🏻
I agree. After getting over the sticker shock. I glad I went with it. Thanks for your comments. Please remember to like and subscribe to the channel.
Thank you for this video. My truck just arrived and I’m installing this same antenna bracket. This will be very helpful!
Thanks for the feedback and please remember to subscribe and like the video.
Just installed my antenna mount today. Your video really helped with the installation on my 2024 Ford Maverick. The light connector was a bit different but still easy. Tomorrow its the radio installation. Should be easy as my battery is under the rear seats where my antenna wires are now placed.
I noticed the cabling was manufactured by DX Engineering. I assume they partnered up with Bullet Proof Diesel. Impressive!
Great job!
Great job 👏, thank for sharing your experience. Remember to like and subscribe to the channel.
Rey I like the setup very clean instal thanks for the time to make the video
Thanks for the feedback.
Thank you for sharing. It was a big help.
Thanks for the comments, Please remember to like and sub to the channel.
Did you ever put an SWR meter on the GMRS side? I also have a ham radio setup in my 2015 F150. Due to having an ATAS-120 on the front driver side quarter panel area and a dual band vertical on the front passenger side quarter panel I'm short on space for a GMRS antenna with good ground.
Outstanding job, and very clean install. Nicely done.
Thanks for commenting. Please remember to subscribe and like the video.
@@DIYRAY Already done. Have you done any range testing with your GMRS radio? I own a 2015 Ford F-150 and since it is mostly aluminum I have been looking for a way to install a decent GMRS 2 way and maybe a HAM 2 way. Your video brings hope to my problem. Keep up the positive work.
@@ldean2832 my range is very good. I’m able to hit my clubs repeaters a few miles away from my house also having the antenna at its highest point help with reception.
I like it, thanks for the video!
Thanks for your comments. Please remember to subscribe and like.
@DIYRAY after all this time, how is it working? I'm looking at getting a single antenna mount for my Ram
@@jamesweatherby5520 working just fine. It’s expensive but I don’t regret buying it.
the bullet proof mount is the cats meow. but they are way to much in love with it.
a cheep lumber rack would cost far less.
Thanks for the comments. Please check the description section of this video for more details about items used in this video. Links are provided
Really nice presentation!
Thanks 🙏🏽 for your comments.
So how has it worked out? Maybe a long term review? Any promplems? Have you tested different antennas?
Great video. I'm leaning towards this mount, but I"m still not sure I'm willing to drill into my truck. Looks wise, this is exactly what I want, plus it gets the antenna higher.
What is the bracket you have your radio mounted to? Looks like a good way to mount the radio to me.
Thanks for the question, please read the description section of this video. All links are provided for items in this video.
Nice video! Do you think the standard 15' coax that comes with it will reach to under the front seat?
@@aa5az423 Thanks for your question, yes i think it will be enough. Coax to reach the front.
I so wanted this! I checked out their website and no love for a 2008 F-150. 😭😭😭
@@devinhedge you know, you know what that means? Time for a new truck!🛻
How was SWR?
How has this held up a year later on?
It’s holding up well, I don’t have the swr rating but it seems to be working fine. Thanks for your comment.
VERY good video. What were your SWR readings on both radios?
I haven’t installed the second radio yet. Once I do then I willing measure the swr.
How did you run the wire from the radio to the faceplate I'm assuming? Solid work and very clean.
Using the cable that was supply with the item. Please check out the video shorts that i recorded showing my set up.
Where is the link to Bullet proof Diesel where you purchased the antenna mount bracket?
I didn’t add it in the description. Sorry. Just do a search for bullet proof diesel.
Thank you!...I have the same bracket and getting ready to do the install...I have the same Midland...what are you going to use for the Ham radio??
I haven't install my Ham radio yet. Still doing doing other projects. But will get to this soon. Maybe will be going with a Icon.
Hi..thank you for making this video - will attempt the same installation on my 23 SD Tremor. Can you advise how your routed 12v power from the battery to the radio's behind your back seat?
Thanks for your comments. Please watch the videos short on my channel on how I install my radio. Good luck 🍀 and please remember to subscribe and like the videos.
Nice job. Wonder if they make those for the Nissan Frontier?
Thanks
Very Nice!
Thanks for the feedback and please remember to subscribe and like the video.
Damn nice video!
Thanks for the feedback and please remember to subscribe and like the video.
Nice Video
Thanks
I want that same GMRS radio, I have the same Builtright industries molle panel which i never used so I'd like to put the radio there too, how are you extending the handheld?
@@carlosandrade7439 Check out the playlist on my channel- th-cam.com/play/PLZMvf-wrhRkYprtpyeN6i9Mf1pTgRdKNg.html&si=YPVMVtQx9nc-yl-T
I was told you shouldn't roll your extra cable up, cut and shorten or run through your vehicle. Have you found and loss from it being rolled us as you showed in video?
I haven’t had any problems with my installation. Thanks for the feedback.
5 min later, I saw a video that tested out this very theory. I linked it in another post if you felt like watching it.
How is the noise floor with the antennae that close to the oem antennae on the roof?
Question did you have any water leaks at all great video install thank you
Nice video. I want to do gmrs and cb Will this work or do i have to specify what i want when ordering? Thanks
This will work for your project. Good luck 🍀
Great video, and great work, thanks for sharing. How has the mount help up? Any leaks or other problems? How's your SWR? Very interested in this.
Absolutely no problem been holding up well and highly recommend.
How is it grounded?
Though the installation on the roof and radio cables to the radio.
Very clean install. I have the single antenna version on my truck and i love it. It is super clean and an amazing look for the truck. What is that rack you used to mount the radios to behind the seat? I have an f150, not sure if it would work, but would like to research 🤔
Thanks for your comments. Please read the information listed in the description below. I believe I listed it. If not let me know. Please remember to subscribe and like.
@DIY RAY thank you. I found it shortly after I had made the comment. I might have to get the under seat one too 🤣
What is the dril size that u use
Thanks for your question. I started the size of the drill bit in the video. Please watch again for that information. Good luck 🍀.
Great video thanks for sharing KI5VOY 73
Thanks for your comments. K2SDS 73
You've spent some serious cash on your truck, between the antenna mount and the tonneau cover (diamondback) you're $2.5k deep in accessories.
@@RP-ks6ly Yeah, God blessed me with the opportunity to buy some toys for myself. You can’t take it with you when God calls you home. So enjoy the gifts the Lord has given us and give honor and praise to the heavenly father.
@@DIYRAY good on you. Keep working and showing the world how to DIY.
I had no idea ya had a gmrs license
Yes, WRQG291. How looking for my ham radio set up. 73
Way to much money for an antenna mount😂 get a pocket mount or a tool box for the bed would be cheaper
I’m of the mind, buy once and 😢 once. I’m totally fine with it.
@@DIYRAY 😂😂