★☆★ TIME STAMPS ★☆★ 00:00 - Intro 00:11 - Trailer 00:30 - Getting Started 01:07 - Cords & Materials 02:43 - Step 1 : Measure 1x 90 cm (35") cord to 15 cm (6") on one end, fold it over and attach it onto the ring with a Reverse Lark's Head knot. 04:42 - Step 2 : Use the longer end as a working cord for 12 consecutive Vertical Lark's Head knots. 06:19 - Step 3 : Fold the pattern into a loop and bring the anchor cord to the front and around the back for a Double Overhand knot. 07:14 - Step 4 : Measure 1 x 75 cm (30") cord to 12 cm (4.75") on one end, fold it over and attach it onto the ring with a Reverse Lark's Head knot. 07:54 - Step 5 : Tuck the cord ends from the previous section into the Reverse Lark's Head knot Loop of the current section. 08:35 - Step 6 : Make 10 consecutive Vertical Lark's Head knots. 09:25 - Step 7 : Close off the loop with a Double Overhand knot at the back. 10:45 - Step 8 : Repeat the same pattern with 1 x 65 cm (26"), measuring one end to 10 cm (4"). Make 8 consecutive Vertical Lark's Head knots. 12:07 - Step 9 : Close off the loop pattern the same way with a Double Overhand knot at the back. 12:46 - Step 10 : Repeat the same pattern with a 55 cm (22") cord, measuring one end to 9 cm (3.5"). Make 8 consecutive Vertical Lark's Head knots and close off the loop. 14:27 - Step 11 : Repeat the same 4 loops on the left side, mirroring the pattern on the right side. 18:44 - Step 12 : Trim off excess cords at the back. 19:12 - Step 13 : With a 30 cm (12") strand of cord, make a Reverse Lark's Head knot at the top of the ring, then thread the bead through and tie an Overhand knot. 20:12 - Step 14 : Comb through 2 groups of 5 x 30 cm (12') cords. 20:54 - Step 15 : Place one section on the left-side, and one section on the right-side, and comb through the fringe in the middle. 22:32 - Step 16 : With a 25 cm (10") cord, make a Gathering knot onto the fringe. 23:45 - Step 17 : Trim off excess cord ends and the fringe at the bottom. 24:40 - Outro
Your videos are always great. I haven't thank you enough for the ideas. i was abke to follow one of your videos and did 100pcs while im pregnant and use it as a souvenir for my kids baotism day. Thank u so much🎉
Great ideas. Have already started to do my Xmas angels and will make this one for gifts. Gonna add a small ring on head for halo to finish head off. Thanks your fab!!!
★☆★ TIME STAMPS ★☆★
00:00 - Intro
00:11 - Trailer
00:30 - Getting Started
01:07 - Cords & Materials
02:43 - Step 1 : Measure 1x 90 cm (35") cord to 15 cm (6") on one end, fold it over and attach it onto the ring with a Reverse Lark's Head knot.
04:42 - Step 2 : Use the longer end as a working cord for 12 consecutive Vertical Lark's Head knots.
06:19 - Step 3 : Fold the pattern into a loop and bring the anchor cord to the front and around the back for a Double Overhand knot.
07:14 - Step 4 : Measure 1 x 75 cm (30") cord to 12 cm (4.75") on one end, fold it over and attach it onto the ring with a Reverse Lark's Head knot.
07:54 - Step 5 : Tuck the cord ends from the previous section into the Reverse Lark's Head knot Loop of the current section.
08:35 - Step 6 : Make 10 consecutive Vertical Lark's Head knots.
09:25 - Step 7 : Close off the loop with a Double Overhand knot at the back.
10:45 - Step 8 : Repeat the same pattern with 1 x 65 cm (26"), measuring one end to 10 cm (4"). Make 8 consecutive Vertical Lark's Head knots.
12:07 - Step 9 : Close off the loop pattern the same way with a Double Overhand knot at the back.
12:46 - Step 10 : Repeat the same pattern with a 55 cm (22") cord, measuring one end to 9 cm (3.5"). Make 8 consecutive Vertical Lark's Head knots and close off the loop.
14:27 - Step 11 : Repeat the same 4 loops on the left side, mirroring the pattern on the right side.
18:44 - Step 12 : Trim off excess cords at the back.
19:12 - Step 13 : With a 30 cm (12") strand of cord, make a Reverse Lark's Head knot at the top of the ring, then thread the bead through and tie an Overhand knot.
20:12 - Step 14 : Comb through 2 groups of 5 x 30 cm (12') cords.
20:54 - Step 15 : Place one section on the left-side, and one section on the right-side, and comb through the fringe in the middle.
22:32 - Step 16 : With a 25 cm (10") cord, make a Gathering knot onto the fringe.
23:45 - Step 17 : Trim off excess cord ends and the fringe at the bottom.
24:40 - Outro
Beautiful angel 😍😍😍
Angles are my thing at Christmas. Thank you so much for such a beautiful one that I can make for each of my family members to hang on their trees.
You are so welcome!
Your videos are always great. I haven't thank you enough for the ideas. i was abke to follow one of your videos and did 100pcs while im pregnant and use it as a souvenir for my kids baotism day. Thank u so much🎉
Wow that’s amazing! You’re so welcome :)
So beatiful❤
Love this and can't wait to try it out. Thank you!
Hope you like it!
Beautiful
Que lindezaaa!!!😍😍😍👏👏👏👏👏
Thank you!
Great ideas. Have already started to do my Xmas angels and will make this one for gifts. Gonna add a small ring on head for halo to finish head off. Thanks your fab!!!
Great idea!!
Very nice! Thank you
Thank you :)
Nice👏👏🎄
Thanks!
Thank you for your generosity ❤️
Lindooooo😍😍😍😍
Isn't it gorgeous??
❤
👏👏👏👍
❤