*More suggestions to add to the workshop:* 1. Tool racks 2. Dummies for combat 3. A smelting furnace (idk if it will fit tho) 4. The roof could have glass in the center 5. The doorways that are on the sides (5:32) would work better on the corners since the castle walls are offset from the workshop walls (4:32).
Here’s a good vid idea. Tour each other (kan, squid and John) around everyone’s survival bases so you can see each others progress. Would be a cool video!
idea for the base 1: make the ceiling look like ikea's with spotlights 2: make a flat roof so you can land flying creations with a stair way down 3: make a tower on the flat roof like so scrapman see this.
Ok, just make the entire thing a giant tower that becomes 1 block smaller every floor until it’s a very small room that can detach and turn into a rocket.
TWO IDEAS. One: REplace the second wheel on the wall to a scrap wheel and second, Go paint hunting and for the roof have pipe pieces painted as wires. Flat roof btw.
Thats too easy. It should scan and copy a (simple) figure (4*4 blocks for example)....but maybe thats a better question to ask kan because i don't know how much scrapman is into that logic stuff :D.
You should make a part of the work shop for car experimentation, you could make a car that looks like it is still in the progress of being made. Or you could make like a show room, where you have every tier of every object and block.
For the roof you can try a folding mecanism and when it's day time you can have it open and when it's dark you can close it and that solves the lighting issue
Denis Arhire bruh common toast meant that at night u need light, so closing the roof is virtually useless, since you will need to put lights on it anyway. Why not just have a roof with lights lol
Please add a wave table in the shop for the old guys love then maybe like a small one above the craft boys in the middle so you can look at it wale you craft like so he sees
I whole-heartedly agree. The very first video I watched of his was his very first Piston Workshop video (before he called it that) because I was bored and decided to watch something random. So it's be like going back to the beginning for me. Plus, it just looks really nice.
You need to had a Terrace to that roof ! A place to sit , drink , enjoy and relax after a long day in the workshop ( Looking at the machine working on their own.. that must be exhausting ! )
For lifting the hammer place the piston one block off and place a block on the piston and connect it to hammer handle using a bearing which will just free float putting less stress on piston and making it smoother.
i like the sound of a dining hall above the workshop that seems cool and you can invite people to your world and tell them to go to the dining hall as a part of the tour
Some ideas: The Anvil hammer piston shouldn’t pause at zero length but at something like 4 or 5. In the middle of the press platform you should make a hole and put a suspension with a block ok top so it actually looks like the press is pressing something. Amazing video as always ScrapMan, excited for the next one
The press should have something in a suspension that is hidden underneath so wen the press goes down it looks like that thin ia being compressed 👇like so he see's it
You could add a cheminé with smth that blows air in it and animate it. Also for the roof, a french roof with wood every "..." Block to make it good looking. Amazing video too, as usual
I think the table should have a mounted vice / grip / clamp. Can get more of those recessed curved pieces and a pipe rod for the middle. You can also add drill press, lazer cutter, chizels, grindwheel, computer, mini bookshelves and a drawing table if you want some ideas. I remember these from mutt studies.
To set a certain blok to a chest (only works with stackable items btw) fill every slot with 1 blok and whenever you craft something and other chests are full it will go to its own chest and u can paint each one for its own thing and non-stackable items go to the closest chest and if u place craftbots next to each other the items will passthrough it and u can craft faster.and it will still be looped.also u can use curved vacuum pipes for curved wedges like so scrapman can see
It would look better during the day if you would put the spotlights on a button, so that you can turn them off during the day (to avoid the super bright light)!
Maybe make a kitchen with a double crafted fridge, a ofen, a double sink with a duckie, a fancy toilet or something and a big party-like dining hall on the second floor. By the way, I love the survival series very much and I have been following the series since the beginning (I am subscribed since about a year). I have started a TH-cam-Channel recently hoping to grow some day. It would make my day if you'd heart this or respond to this, whatever. :)
The name you're looking for is Mitre saw/chop saw. Now you need to make it so you can cut different angles 😆. Looks cool. What about a pillar drill? maybe some offset blocks to act like a drill bit?? Or even just a single row of blocks.
a really cool ceiling/floor could be the tree logs you used to make the wood car thing. It would make a really neat looking ceiling and a good floor for the second floor.
Scrapman idea for roof (if ur not planning on more floors) : Get some of those pieces that u put some for hank’s house And line up the sides of the roof with those and keep that hole in the middle and put some ropes (or rope looking stuff) hanging and connected from both sides of those pieces and since my english is bad asf heres a module so hopefully this makes sense First piece Second piece -----_ _----- \_. ._/ \__/ Rope And ps maybe add some lights on the rope thing so it gives that old times market vibe
for the roof how about building smaller roofs around every wall and leave it kinda like an aopen area in the middle,or just glass something like this casepractice.ro/wp-content/uploads/2016/07/case-cu-gradina-interioara-Interior-courtyard-houses-13.jpg
upstairs you should put three rooms in it a bed room, a dining room with a window that looks out the sea and your glow bug farm ,and most important of all a bathroom ps love your vids
for the ceiling in the workshop you should use some metal girders for structural supports and ceiling girders, and some of the fat yellow pipes for ducts (both found at warehouse) find some pictures for some irl warehouses
You could do like smaller castles or towers in the middle of the lake and put different things in them, like a zoo/museum for example or something like that, or rooms and a dinner room and then connect all with bridges so it doesn't lag that much. I don't know if I explained well. Hi from Spain!
you should make the hydraulic press be crushing something, like a metal block. when the press is up the block is fully up but then as the press is down it crunches a bit, when the press moves up the block is mostly compressed. this can be done via a piston that is hidden in the base of the press. you could also make it so that the block is slowly pressed flat over multiple presses by the hydraulic press. Just a suggestion you don't have to take it, i really enjoy your videos and always try to watch them.
I think for that sawblade cutting thing, you should put it against the wall on the corner right beside the craft bots and the refineries because it's in a really odd place, to close off the entrance to add some variety and i also feel like there's just too many openings.
The saw you built is a chop saw. More tools: Drill press Table Saw Lathe I love the power hammer; reducing the counterweight would make it fall faster which would look more accurate I think. Was also wondering if you put a metal block under the hammer (unattached) if it would spark...
You could do the ceiling out of glass and tier 2 or 3 metal in a grid patern. That way, you would be able to see your workshop through the floor of your dinning room.
Above the workshop, make a helipad for you to land your future hovercraft on, and also a chimney with a fireplace under it in the workshop with embers in it. And maybe right next to the anvil.
Use "Generator Coil Segments" and "Generator Coil Corners" from warehouse roofs to build a border to your roof, then do the top with beams and glass skylights.
one idea for how to make the craftbot loop more visually appealing and feel like they are set into a wall without sacrificing the accessibility of it could be to use the chests as said wall, by having them loop around over the tops of the craftbots instead of just under them. this might require the use of a few tubes to make the turns look nice, but it would probably look even cooler than it does now, just by turning the slab shape into more of a ring shape that hugs the sides of the system a bit more.
The top roof should be a stepped roof (instead of using bearing for an angled roof) so it has a "sloped" appearance. Going off some other suggestions, make a raised section that is flat to land flying creation on. Then that means you need to make a flying creation to land on it!
Hello, Scrap Man! The hydralic press should have some piston with a block on the bottom, and whe the presser comes down the pisto with the block ontop should go down, so it looks like it's getting pressed!
I have a suggestion for the stabilized mug. Since it isn't an SM mug, I think you should paint it red so at least it isn't blue. Another thing, I doubt that Marvel would allow this, but it would be epic if you could make a mini Iron Man suit in the workshop.
I started watching this episode and when you said that you want to keep your chest linked to you craft/refinery boys you can use the clear tubes to connect these so you could have your chests on one wall and use the tubs to connect the craft bot to another wall so all your resources are still together and you can do loop crafting I hope this was help and yes I know this is not grammatically correct
Hey Scrapman, if you have made an anvil, it has to have a purpose. An anvil doesn't mean anything without a crucible, so I suggest making a crucible with pistons to animate the fire, and have a small chimney.
For more animation, alter the hydraulic press in to a butterfly press, that way the top spins 1 way as it presses down, and the other way to raise it up
![2 Experiments! Vacuum Pump Gun? Raid Capture? - Scrap Mechanic Survival Mode [SMS 58]](http://i.ytimg.com/vi/ayjDQzgcs_0/mqdefault.jpg)
![2 Experiments! Vacuum Pump Gun? Raid Capture? - Scrap Mechanic Survival Mode [SMS 58]](/img/tr.png)
![This "Helmet" Build Isn't What You'd Expect [Scrap Farer Mod]](/img/n.gif)
*More suggestions to add to the workshop:*
1. Tool racks
2. Dummies for combat
3. A smelting furnace (idk if it will fit tho)
4. The roof could have glass in the center
5. The doorways that are on the sides (5:32) would work better on the corners since the castle walls are offset from the workshop walls (4:32).
people should be liking this comment
you have some good ideas!
Another thing to add could be a plasma cutter/Cnc router table
Here’s a good vid idea. Tour each other (kan, squid and John) around everyone’s survival bases so you can see each others progress. Would be a cool video!
Yeah
:)
It is a cool for I dill
:):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):):)
I would like to see a survival Sunday with the four of them. Or Saturday.
Put a block on a suspension in the hydraulic press you "press" a block down
I like this idea, imma comment to make the algorithm like it
@@zealousdoggo appreciate it bro
Hey, that's pretty good!
Or instead of a block a suspension so it compresses
That's what I was going to say
This theme of living powertool is like Beauty and the Beast: Dwarven Edition
Scrap mechanic developer team: My haybot
Scrapman: *OUR* haybot
*Communism intensifies*
*USSR ATHEM INTENSIFIES*
The Hmmm lol
Yuan Kyle Gaudier ?
juwa aliyu ?
Most youtubers: plaguing us with RAID: Shadow Legends!
Scrapman: They wouldn’t like it, get outta here!
Me: OhMyGosh thank you so much-
YellowPhoenix_31 but at some point I can bare a 30 second sponsor I can skip for the sake of scrap man making some extra money
@@lance3529 as long as it's something related to building
like a building-based game or an actual hardware company
thats exactly what i thought
His house is gonna became a 10 story hotel on the end
I feel that would be hank's house
Hank must have mansion
@@Xx_Rustin420_xX ye lol
There is not gonna be a end...
@@JifalosJM to infinity and beyond!
It would be awesome if he makes a a open and closing roof for flying creations
Nice i idea
aedi i ecin
That actually would be really cool
Would be cool but laggy af
@@wiktorldaplag2695Yeah.
The holy hole of holiness you will feel special when going through it
:-0 take my like and leave this comment section
Thats what she said! XD
Hello
Thats what she said 🤣
The hole to heaven
The lights in the toll booths at warehouses are crazy bright and one could light up ur entire work shop
idea for the base
1: make the ceiling look like ikea's with spotlights
2: make a flat roof so you can land flying creations with a stair way down
3: make a tower on the flat roof
like so scrapman see this.
I like your idea
I like your ideas but the “like so scrapman can see” deters me from liking
Magnus - Gaming u spelled liking wrong
Billy Guo No? I did not spell liking wrong
Billy Guo lol no he didn’t
Ok, just make the entire thing a giant tower that becomes 1 block smaller every floor until it’s a very small room that can detach and turn into a rocket.
...maybe
Stupid idea
30:45 "Don't know how long it will be available" available until Monday
Lol
Lol
Lol
TWO IDEAS. One: REplace the second wheel on the wall to a scrap wheel and second, Go paint hunting and for the roof have pipe pieces painted as wires. Flat roof btw.
BRO I HAD THE SAME IDEA FOR THE WHEELS
If you raid a warehouse roof the generators up there have nice wires and even a fuse panel
@@darkwarrior1588 oh really? Nice let's add that to the idea lol
And for today's upload time report: scrapman was 10 seconds late. Very good
I was going to do this awwww
I love your videos 😎
Ahh man 3 mins late
I’m running slow I was four minutes late
@@guy5409 haha noice
You should put a suspension price under the hydraulic press and also a Newton’s cradle
nice idea :)
Thank you
uoy sknahT
Backward comments be like
BTW am the only person who thinks the craft station now looks like a torture room?? Fits well i guess??
I do not see it as a torture chanber.
@@2kkl4wz chamber?
not just you
Yeah lol
I love cursed comments
Scrapman!
Add an item on a suspension at the bottom of the hydraulic press, so when it goes down, it looks like the item is crushed
You should make a 3d printer, since you can place blocks with the vacuum pumps.
Thats too easy. It should scan and copy a (simple) figure (4*4 blocks for example)....but maybe thats a better question to ask kan because i don't know how much scrapman is into that logic stuff :D.
I like your idea of 3d printer
@@sanitoeterscc3416 hmhp interesting
That's a really cool idea
So Hank had a couple of friends over and there were two bodies in his front yard. Now im not saying Hank’s a killer but....
Or maybe it’s his house, and his friends left, and the reason there are bodies is because his neighbor is a warlord. (Dont whoosh me I got the joke.)
They stole his vending machine so he did what was necessary
@@haydennewcomer3561 heh I would do the same
No, c’mon a killer? he looks so docile.
He can make a garage upstairs with a catapult to launch his vehicles when he goes out
Lol
Won't they break
It would probably be super laggy tho
He whould need atleast 6 pistons
We can imagine
You should make a part of the work shop for car experimentation, you could make a car that looks like it is still in the progress of being made. Or you could make like a show room, where you have every tier of every object and block.
For the roof you can try a folding mecanism and when it's day time you can have it open and when it's dark you can close it and that solves the lighting issue
That can give a lot of lag
@@deborahruijters3378 yeah but that will look soo cool
@Common Toast but when is day you won't
Denis Arhire bruh common toast meant that at night u need light, so closing the roof is virtually useless, since you will need to put lights on it anyway. Why not just have a roof with lights lol
That would be like. His draw bridge. But 10 times bigger. The game will die
Please add a wave table in the shop for the old guys love then maybe like a small one above the craft boys in the middle so you can look at it wale you craft like so he sees
I whole-heartedly agree. The very first video I watched of his was his very first Piston Workshop video (before he called it that) because I was bored and decided to watch something random. So it's be like going back to the beginning for me. Plus, it just looks really nice.
That sounds great but that can go on the next floor. As the center piece.
As much as this would be a cool idea I don't know how laggy that would be for his frames...
Scrapman logic:
My base looks like medieval castle
Lets make a modern workshops with modern machinery for it
JK scrapman luv ur vid
You need to had a Terrace to that roof ! A place to sit , drink , enjoy and relax after a long day in the workshop ( Looking at the machine working on their own.. that must be exhausting ! )
At the beginning of a new survival world: It feels like after ten seconds of gameplay, your inventory is full.
For lifting the hammer place the piston one block off and place a block on the piston and connect it to hammer handle using a bearing which will just free float putting less stress on piston and making it smoother.
Is everyone feels that scrapman has improve his editing skills
im pretty good at editing my comments
@@wyvernknight nah, dhdjrbjxudb difheb ifbdnif udnkapfj idn fhsj
edit: what I said is Nah, actually I am better at this
watching the shadow of the hammer is sick
3 minutes (my best ever!)
Mine is a second
Moos MW he means 3 minutes since the video was posted until he clicked on it
Show off );
@Moos MW 3 minutes after release
i like the sound of a dining hall above the workshop that seems cool and you can invite people to your world and tell them to go to the dining hall as a part of the tour
Scrapman:we'll just leave hank over here so he can watch us build
Me:theres a wall
Some ideas:
The Anvil hammer piston shouldn’t pause at zero length but at something like 4 or 5.
In the middle of the press platform you should make a hole and put a suspension with a block ok top so it actually looks like the press is pressing something.
Amazing video as always ScrapMan, excited for the next one
I feel like the saw table should just have a saw in the table like a table saw so you push stuff into the saw
For the hydraulic press you should attach a mug or something attached to a suspension inside of it to make the effect of it pressing
The press should have something in a suspension that is hidden underneath so wen the press goes down it looks like that thin ia being compressed
👇like so he see's it
manugamer3880, a rubber duck.
Scrapman I like the new workshop! especially with the animated stuff, The hammer is my favorite. Keep up the good work!
I just finished watching the last episode
You could add a cheminé with smth that blows air in it and animate it. Also for the roof, a french roof with wood every "..." Block to make it good looking. Amazing video too, as usual
"And then a bucket of tools"
Yes scrapman beacuse that *totally* makes sense.
Finally! The workshop is working. Thanks for continuing to post.
Suggestion: make a DOOMS DAY BUNKER that can only be accessed with a code pannel.
Or a money vault.
Determinator K
Why was that capitalized
@Depressed sans like to play with a lit lightsaber because its a *DOOMS DAY* bunker
Determinator K
That's completely normal
What if I just
CORN HUB
@Depressed sans like to play with a lit lightsaber WTF! What did i get my self into!!
I think the table should have a mounted vice / grip / clamp. Can get more of those recessed curved pieces and a pipe rod for the middle.
You can also add drill press, lazer cutter, chizels, grindwheel, computer, mini bookshelves and a drawing table if you want some ideas. I remember these from mutt studies.
Scrapman: You should do another dress bot video again.
Like So He Can See
To set a certain blok to a chest (only works with stackable items btw) fill every slot with 1 blok and whenever you craft something and other chests are full it will go to its own chest and u can paint each one for its own thing and non-stackable items go to the closest chest and if u place craftbots next to each other the items will passthrough it and u can craft faster.and it will still be looped.also u can use curved vacuum pipes for curved wedges like so scrapman can see
I just want to say to anybody who’s reading, have a good day.
Thanks lmao 😀
You too, bro
Thanks even tho it's 4am, u too
Thanks m8.
Thank you :)
You should put a mug or some object on a suspension for the hydraulic press!!
Make a ccok-bot mech with wheels making it go in a circle or stay still
You colud make for example mug on suspension on Press that goes down when press does and up when press does too
Build a glass ceiling on the workshop
No
@Dishank Parmar the purpose of a glass one is to look cool
You should put a greenie head in the press like you are crushing it
You should make actual farming equipment,like tractors or something.
@@pixy6239 noooooooooos
@@TheGreatBigBo11 you say no to everything
Tractors interesting ummm yeah how small scrap man gonna do that ;-; his farm not like squid
@@intantarmizi6138 I know but it would be cool.
23:24 Yay!!!!!!! Suspension mug :)!!!!!!!!!!!
Put the tote head on a sensor so when you walk to the table like its saying hi
Yes!
It would look better during the day if you would put the spotlights on a button, so that you can turn them off during the day (to avoid the super bright light)!
Put A Lamp In Hank's Balcony (Somehow)
Maybe make a kitchen with a double crafted fridge, a ofen, a double sink with a duckie, a fancy toilet or something and a big party-like dining hall on the second floor. By the way, I love the survival series very much and I have been following the series since the beginning (I am subscribed since about a year). I have started a TH-cam-Channel recently hoping to grow some day. It would make my day if you'd heart this or respond to this, whatever. :)
Build a rotodyne in trailmakers please
The name you're looking for is Mitre saw/chop saw. Now you need to make it so you can cut different angles 😆. Looks cool. What about a pillar drill? maybe some offset blocks to act like a drill bit?? Or even just a single row of blocks.
You do realize you would need to start a season 2 pretty soon right?
I dont really think so.
@@2kkl4wz bruh, scrap is being asked, not you
@@TheGreatBigBo11 i wasnt trying to be rude, I just thought that a second season wouldnt make sense right now.
I’d like to see another level above the workshop!
Hey scrapman make tank that shoots bombs or make the auto turret turn for more killed bots and defense
No
thats a waste
but its cool
a really cool ceiling/floor could be the tree logs you used to make the wood car thing. It would make a really neat looking ceiling and a good floor for the second floor.
make them gradualy look more advaced like levleing up an engine
No
Iori Jei yes
No
jules de jongh yes
advanced
Scrapman idea for roof (if ur not planning on more floors) :
Get some of those pieces that u put some for hank’s house
And line up the sides of the roof with those and keep that hole in the middle and put some ropes (or rope looking stuff) hanging and connected from both sides of those pieces and since my english is bad asf heres a module so hopefully this makes sense
First piece Second piece
-----_ _-----
\_. ._/
\__/
Rope
And ps maybe add some lights on the rope thing so it gives that old times market vibe
for the roof how about building smaller roofs around every wall and leave it kinda like an aopen area in the middle,or just glass
something like this
casepractice.ro/wp-content/uploads/2016/07/case-cu-gradina-interioara-Interior-courtyard-houses-13.jpg
upstairs you should put three rooms in it a bed room, a dining room with a window that looks out the sea and your glow bug farm ,and most important of all a bathroom ps love your vids
And image on steam it's the same as my TH-cam image
?
@Thomas Sager idk but my other comment vanish somehow so
@@VampVR1 idk but my other comment vanish somehow so ehh
This is really cool! It inspired me to build my own workshop. Also, yeah, you do have the saw backwards.
Day 56 of trying to become a meme
H
for the ceiling in the workshop you should use some metal girders for structural supports and ceiling girders, and some of the fat yellow pipes for ducts (both found at warehouse) find some pictures for some irl warehouses
You should build some type of a living room or bedroom to just chill out in with some sofas and entertainment and that type of stuff.
You could do like smaller castles or towers in the middle of the lake and put different things in them, like a zoo/museum for example or something like that, or rooms and a dinner room and then connect all with bridges so it doesn't lag that much.
I don't know if I explained well.
Hi from Spain!
you should make the hydraulic press be crushing something, like a metal block. when the press is up the block is fully up but then as the press is down it crunches a bit, when the press moves up the block is mostly compressed. this can be done via a piston that is hidden in the base of the press. you could also make it so that the block is slowly pressed flat over multiple presses by the hydraulic press. Just a suggestion you don't have to take it, i really enjoy your videos and always try to watch them.
I think for that sawblade cutting thing, you should put it against the wall on the corner right beside the craft bots and the refineries because it's in a really odd place, to close off the entrance to add some variety and i also feel like there's just too many openings.
The saw you built is a chop saw.
More tools:
Drill press
Table Saw
Lathe
I love the power hammer; reducing the counterweight would make it fall faster which would look more accurate I think. Was also wondering if you put a metal block under the hammer (unattached) if it would spark...
Why did the shadow at 17:26 look like a t-posing Mega Man?
His channel has grown so much. I'm happy for him.
that editing with the mask was so smooth man
You could do the ceiling out of glass and tier 2 or 3 metal in a grid patern. That way, you would be able to see your workshop through the floor of your dinning room.
Above the workshop, make a helipad for you to land your future hovercraft on, and also a chimney with a fireplace under it in the workshop with embers in it. And maybe right next to the anvil.
Bruh his videos are just SOOOO good, seriously ScrapMan your videos are very entertaining!
This is the first channel I have ever really considered buying merch from.
Use "Generator Coil Segments" and "Generator Coil Corners" from warehouse roofs to build a border to your roof, then do the top with beams and glass skylights.
"Push Buttons"
from Have Rocket Will Travel-the Three Stooges
Great reference!
i like what scrapman did with the work bench
one idea for how to make the craftbot loop more visually appealing and feel like they are set into a wall without sacrificing the accessibility of it could be to use the chests as said wall, by having them loop around over the tops of the craftbots instead of just under them. this might require the use of a few tubes to make the turns look nice, but it would probably look even cooler than it does now, just by turning the slab shape into more of a ring shape that hugs the sides of the system a bit more.
The top roof should be a stepped roof (instead of using bearing for an angled roof) so it has a "sloped" appearance. Going off some other suggestions, make a raised section that is flat to land flying creation on. Then that means you need to make a flying creation to land on it!
Hello, Scrap Man! The hydralic press should have some piston with a block on the bottom, and whe the presser comes down the pisto with the block ontop should go down, so it looks like it's getting pressed!
Add in living quarters on the second floor
You could place chests at the wall and connect them from the back with pipes to the crafting system
I have a suggestion for the stabilized mug. Since it isn't an SM mug, I think you should paint it red so at least it isn't blue.
Another thing, I doubt that Marvel would allow this, but it would be epic if you could make a mini Iron Man suit in the workshop.
I started watching this episode and when you said that you want to keep your chest linked to you craft/refinery boys you can use the clear tubes to connect these so you could have your chests on one wall and use the tubs to connect the craft bot to another wall so all your resources are still together and you can do loop crafting I hope this was help and yes I know this is not grammatically correct
Move the saw against the wall!
I haven't been watching for a while and WHATTT YOUR BASE IT LOKKS SO COOL
Hey Scrapman, if you have made an anvil, it has to have a purpose. An anvil doesn't mean anything without a crucible, so I suggest making a crucible with pistons to animate the fire, and have a small chimney.
A workshop needs a calendar. As far as I know, there are only two wall calendars in the game: one on each crashed ship. Looking great so far!
For more animation, alter the hydraulic press in to a butterfly press, that way the top spins 1 way as it presses down, and the other way to raise it up
You should craft some beams and make an industrial-style ceiling with the stairs leading up to the second (or third?) story on the outside!