Hello. Recently I bought Fendt 722 S4 (2016 year) Profi version. It has 7" display. Previous owner had Topcon receiver and some kind of display. I'm wondering can I put new reciever in the roof and connect it to 7" display like you did? Thank you in advance.
Bought me a 718 profiplus last week, second hand, and to be honest i didn't even know it could autosteer until i found this vid :D (i still don't have the tractor here to start discovering it)
During your implement setup you skipped over the navigation point and worked area measurements, you left these at 0. You really should input a value into these boxes as the tractor uses them to help guide the implement online and also the worked area coverage map will start and stop in the correct position. When you leave this as 0 the system uses the receiver location (right above your head) as the point that it tries to steer online and the worked area starts and stops at this same position, rather than the implement or position of the product application. I presume your spreader is 3pt mounted and since you are using autosteer as the coverage map enabler these measurements are somewhat redundant, however if you are using a drawbar mounted implement and are looking for accurate coverage maps then these measurements are crucial.
And your dog has also fun on the "Sightseeingtour "😁
Great video! Just wondering about your gps. So you can’t create a field with boundary? Only waylines?
From this equipment I only have a dog! :D
I don't even have a dog XD
You have done a fantastic job, very simple instructions , thanks, by the way you have a great dog [ Mate] , he loves riding in the tractor !
Hello. Recently I bought Fendt 722 S4 (2016 year) Profi version. It has 7" display. Previous owner had Topcon receiver and some kind of display. I'm wondering can I put new reciever in the roof and connect it to 7" display like you did?
Thank you in advance.
Your doggo is gorgeous!
Best video out there, thanks allot for this great and simple explanation.
thanks mate
Bought me a 718 profiplus last week, second hand, and to be honest i didn't even know it could autosteer until i found this vid :D (i still don't have the tractor here to start discovering it)
Maybe if its possible i wonder if you could make a vid with a deep review about the gps system and auto steering from the beginning.
Thank you
if i remember i will
Cool stuff
nice vid now I know how to do that just need money to buy the tractor lol 😁
Thank you. That was helpful!
During your implement setup you skipped over the navigation point and worked area measurements, you left these at 0. You really should input a value into these boxes as the tractor uses them to help guide the implement online and also the worked area coverage map will start and stop in the correct position. When you leave this as 0 the system uses the receiver location (right above your head) as the point that it tries to steer online and the worked area starts and stops at this same position, rather than the implement or position of the product application. I presume your spreader is 3pt mounted and since you are using autosteer as the coverage map enabler these measurements are somewhat redundant, however if you are using a drawbar mounted implement and are looking for accurate coverage maps then these measurements are crucial.
Great video mate thanks for doing my request!
Ryanhow long does it take to fertilize the field.
about 20 mins
Thank You for have had to pull teeth to get the answer asked like that about you my friend.
What tractor is this 500 series?
720 I believe
Both of your fendts are probably profi spec, right?
Good video:)
is this in the 716 or the 720 as theres are camera on the front and in your last vid u didn't have it
the 720 i just wired it in
FarmingLife nice
It's a power plus version for which the small screen terminal doesn't have camera ports
good video but im still a bit confused