ฝัง
- เผยแพร่เมื่อ 2 ธ.ค. 2022
- In this vedio i will show you How to make Rc F 18 Hornet Jet air plane with brushless motor from Thermopole foam board. Motor used 1050 KV brusless and ESC 40 A. Servo use 3.
Thanks For Watching and don't Forget Like, Share and Subscribe For More Entertaining and Awesome Videos.
PLAN PDF Link: bit.ly/3F0x5pa
Technical Specifications:
Wing: 32 Inch
Lenght: 45 Inch
Flying Weight : 1 kg with Battery
Control system: 4 - 6 channel, 3 Micro Servos
Motor: GT 2812 1550 KV Brushless Motor
Prop : 9x6
Battery Required: 3s or 4s 2200 mah Lipo
Flying duration: 6 to 10 Min
Material :
1 : Thermopole Foam
2 : Hot Glue gun
3 : Fiber Rod for wing
4: Packing Tape for Covering
Thanks For Watching
#rcplane
#homemade
#diy
#howtomake
#rcmaking - วิทยาศาสตร์และเทคโนโลยี
wow~! Excellent build!
손재주가 대단하네요~😀
The design on this one is very appreciable bro , i too was planning out to make a few falcon series jets but my plane body dissection was wayy too complicated , thanks for making it simpler😊
ขอบคุณมากๆครับ
Отличная работа!👍
Nice idea, looks million dollar.
Love from India great job
Welcome bro
good job ❤👍
👏 good job keep it up
Well done
excellent building and flying.thank you for making this boy and posting video. love from India 🥰🙏
Welcome
Good vedio for making
Great buddy .. awsom...
Stupendo 👍👍👍💥💥💥💯💯💯
❤ excelente!!
I love Rc Community Pakistan
I'm Rc plane maker
very nice
Super
1st Viewer....
Amazing construction. May be an EDF.
EDF are way more expensive
@@carlossalas7945 yes, of course
awesome
Thank you for sharing this cool video! I found it very inspiring! Also thank you for creating and posting the instructions! I followed along and I’m very happy with the result! It looks super cool! One question though, could you give any information on the position of the center of gravity?
I love it
Nice
Very nice jet I will try to make one.
Good luck
Love ❤❤
Excellent build ❤ can you also provide the decals(stickers) that you used
i used selfmade sticker
👌👍👌
Hello Bro, How are you, Great plans, I'll also make it later, it's been a long time since I've flown a RC Jet Airplane👍
The motor will overheat without adequate cooling. I can't see it getting any cooling air in that position.
May i know where your place the CG for tis awesome plane?
one step, not shown here is to use a hot iron to stick the packing tape to the foam. This really improves adhesion, and slightly shrinks the tape, making it much smoother.
Yes, but didn't have a professional iron for shrink
can we install a camera to do surface mapping..on the volcano?
عالی
Is this able to fly with an EDF120mm?
How much thrust does the engine you use provide?
1300g
Plan is for A4 or A3
Please make f16 RC jet
I've printed the plans on A4 but the wingspan is only 28 and a half inches
What is the total weigh of plane with battruly ani what is the thrust of motor plz reply
What thickness is the foam so I can go order it please thank you ❤️
Half inch
@@rcmaking3412 thank you for replying love and best wishes from Scotland 🏴🏴🏴🏴🏴🍺🍺🍺🍺
Hi I have been looking for the motor but can't find it anywhere is there another motor I can use please thank you 🏴🏴🏴🏴🏴
@@satan9474 you can use other size of motor. depend on your model size
@@rcmaking3412 am making it the same size so what motor can you recommend for me please 🏴🏴🏴🏴🏴
And the canopy how you did It?
i will make the vedio
can we use 1400kv with 8045 propller with 11.1v bqttry can this plane ws fly
yes
How much cost by making this plane
Please tell me,how do you make the decals ?!
its self made
@@rcmaking3412 OK,yes but how?Thanks
Dair ho
SIR VERY NICE ONLY BODY PRICE???🔥👍🏻🤯
I can make for 18000 pkr
thermopole foam 🤔??? EPS or EPP, pls reply
thermopole
The material is polystyrene board right?
lits made from thermopole
@@rcmaking3412 can i use foamboard?
@@izz1515 ofcourse
How thick is the foam you used?
half inche
Depron sheets would make more faster
this is exellent my friend, I want to make one but what is the size of the paper to print it on? Is it Letter size paper or A4?
check for Full plan vedio Description
@@rcmaking3412 I just finished reading the description and i looked at the plans but no were does it say if i should print the plans in Letter size or A4 paper.
Can I have a copy of this plan please? I plan to use Correx/Corro-Plas thankyou 😊
i share the plan in vedio Description
How do you sand it so easily ??Little balls chip off when i try and sand it
depend on your foam quility
What is the thrust a motor with 9*6 propller 6:39
the thrust on 4 cell lipo around 1300 grams
does it fly?
yes
@@rcmaking3412 ok
добрый день. можете чертёж этого самолета дать?
hi bro, where is the cg point of this plane, I made it but I don't know the cg point
the cg point is shown in plan
@@rcmaking3412 no bro, there is no cg point in the plan and the specifications listed in the description are different from those in the plan bro.
can i download this plan use a3 paper or only a4?
You can check the pdf. if the pdf is 25 or 30 pages so you can print on the a4 page
@@rcmaking3412 16 pages only
Pls send thermopole material purchase adress
Iska poora material bataye please please
structure material thermopole he
@@rcmaking3412
Kya kya kit laga hai sabka naam bataye please please
@@theexpose786 a vedio check kre sab detail he is me
Hello sir g
Instagram I'd
Instagram I'd milegi kya sir apki ya fir koi bhi Tarika jisee bat ho ske aapse
How much does it cost??
50 doller something
Cg plz
Cg is Also mention in plan
Bro tell me cg
In the desc you* said in this vedio*
what you mean bro
@@rcmaking3412 You miss spellled vedio in the description
What is the weight of body
total weight 960grams
very nice job , thanks for ur efforts .
can u check ur email .. thanks 🙏
What is the total weigh of plane with battruly ani what is the thrust of motor plz reply
What is the total weigh of plane with battruly ani what is the thrust of motor plz reply
What is the total weigh of plane with battruly ani what is the thrust of motor plz reply
The total weight with battery and electronics is 1 kg and thrust is 1.2 kg
@@rcmaking3412 thanks my bro