Router Plate Installation
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- Comments are always welcome...
If you have seen my previous video about my wooden table saw wing, you already know that I plan on using it as my router table. So the next step in the evolution is to install the router plate into the wooden table saw wing. There isn't a lot to it. I chose to build a frame, using the actual router bit as a template. Then, using the frame as a pattern, I used a flush trim router bit at the correct depth to cut out the recess for the router plate. All I needed for this application is a 3/8" shelf that is 1/4" below the surface of the table. I cut out the waste and cleaned everything up with a chisel. It ended up fitting great and now I am ready to build the router lift that will mount underneath. I hope you enjoy the video!
Instagram: / thomaslightle
Facebook: / redbarnwoodworking
Etsy: www.etsy.com/s...
Twitter: / tnlightle
Website: www.redbarnwood...
Music:
EDM Detection Mode by Kevin MacLeod
Guit Guit Happy Happy by Mike B. Fort
The Big Beat 80s by Kevin MacLeod - แนวปฏิบัติและการใช้ชีวิต
I used 1/8 th inch hard board with 0,020 FR4 laminated to form an eight inch round plate. ❤❤. Simple circular to route.
nice work! That came out really well. I am looking forward to the lift part.
Lol! I was listening through headphones and I yelled for my dogs to shut up! Great vid, btw!
I do that with doorbells on tv shows lol.
picked up thhe same top at a garage Sale - $10 bucks CAD
missing magnets and level screws
Excellent
+Daniel Zobrist thanks!
I think you need to invest on a good vacuum
Looks great!
+Sarcastic Guitar thanks!
how do you add the router to that insert?
You take the baseplate off of your router base and use the screw holes to attach to the underside of the router insert.
wow....nice.........i enjoy watching rough to finish projects........but....hay.....a dust mask will save your lungs......dont cheat yourself of craftsmanship.....wear a dust mask......please...! peace bro...!
+NhguaVhayz Ajerutas I appreciate your concern. Thanks!
No problem with that Rousseau plate so far?
Thanks for the video.
MustacheVerra no
I juste bought the same... Did you install the other parts?
Which parts?
Corner Snuggers, Leveling système hardware
I did use those, yes. Can’t remember if I documented it.
What's the plate made of????metal or phenolic???
Phenolic. Don’t buy it. It isn’t perfectly flat which has caused me issues.
Vvvvvvv
Watched until the annoying music came on then I went elsewhere.
+4vinos I'm sorry you don't know how to use your mute button.