Fog Light Install w/ Switchback LED Bulbs

แชร์
ฝัง
  • เผยแพร่เมื่อ 11 ก.ย. 2024
  • LIKE, COMMENT & SUBSCRIBE! ❤️
    Hello everyone! This is a guide on wiring/installing a fog light kit for 3rd generation Lexus IS FSport models. This installation can be applied to other vehicles as they are similar in installation process. I finally moved on from the iJDMTOY fog lights but wanted a little versatility between yellow fogs and white fogs, so why not both! I think this is an amazing set up when paired together and couldn't be more satisfied with the results! I really appreciate you all for stopping by, much love. More content is to come so please subscribe, it's free :). If you have any video suggestions or comments just leave it in the comment section below.
    Products in this video:
    Fog light kit amzn.to/3k2L9o5
    LASFIT switchback LED amzn.to/38jVaub
    White LED turn signals amzn.to/3Ki2jIK
    Turn signal resistors amzn.to/3kcCRdb
    Dynamic mirror turn signals tansowerkz.com...
    Other similar products:
    Winjet fog lights amzn.to/3K6Hpwd
    HECASA fog lights amzn.to/3rOmQ1c
    Kojem fog lights amzn.to/37DALQY
    iJDMTOY white fog lights amzn.to/3va0oSo
    iJDMTOY yellow fog lights amzn.to/3EGAvN0
    Auxbeam switchback LED amzn.to/3915yr9
    ALLA switchback LED amzn.to/38jVngX
    Save 10% on Glassparency products using code "Kenny10"
    glassparency.c...
    Film equipment:
    Sony A7iii body amzn.to/2Q3dgrm
    Sony 24mm f1.4 G Master lens amzn.to/3uw5HbF
    Sigma 35mm f1.4 lens amzn.to/3sBHhQo
    Rode VideoMicro amzn.to/3fYc4Rb
    Follow me on Instagram:
    / texus3is
    Business inquires:
    kennyvo.contact@gmail.com

ความคิดเห็น • 69

  • @grind-it-out
    @grind-it-out 2 ปีที่แล้ว +3

    I need this. Appreciate the step by step details. Looks fantastic

    • @KennyVo
      @KennyVo  2 ปีที่แล้ว

      Always! Thanks a lot! 😃

  • @heedless619
    @heedless619 ปีที่แล้ว +2

    Thanks for this! I currently have the ijdmtoy and driver side finally went out so I’m upgrading to this!

    • @KennyVo
      @KennyVo  ปีที่แล้ว +1

      No problem! That is the same problem I had with ijdmtoy. I loved it but the quality control was not being addressed, as it has been an issue with most. This new one, I've had zero problems!

  • @zhieson
    @zhieson ปีที่แล้ว +1

    Great video man! This will be a life saver when I install my fogs. Thank you!

    • @KennyVo
      @KennyVo  ปีที่แล้ว

      Much appreciated! The extra visibility helps a lot!!

  • @MrMlbfan6
    @MrMlbfan6 ปีที่แล้ว

    Last fit lights are amazing

  • @RickyHoowah
    @RickyHoowah 2 ปีที่แล้ว +1

    Love the video. Thanks for making it!!!

    • @KennyVo
      @KennyVo  2 ปีที่แล้ว

      Glad you did and not a problem 😄

  • @turvyz
    @turvyz 7 หลายเดือนก่อน +1

    how did you run the green connection through the firewall?

  • @TheLexusIS250Dude
    @TheLexusIS250Dude 2 ปีที่แล้ว

    looks great keep up the good work with your lexus

    • @KennyVo
      @KennyVo  2 ปีที่แล้ว +1

      thanks thanksss!

  • @Grey3IS
    @Grey3IS 2 ปีที่แล้ว

    Great video Kenny!

    • @KennyVo
      @KennyVo  2 ปีที่แล้ว +1

      thanks so much Mr Grey 3IS 😁

  • @donaldramsamugh1723
    @donaldramsamugh1723 ปีที่แล้ว

    Great video Kenny, that little black thing is a relay to regulate the voltage to the foglights bro..

    • @KennyVo
      @KennyVo  ปีที่แล้ว

      thank you much appreciated

  • @AlejandroMartinez-gw1lw
    @AlejandroMartinez-gw1lw 2 ปีที่แล้ว

    Great video! I have the Ijdmtoy white and yellow haha 😂
    I am also in Houston, would definitely love to see the car, i have an IS as well and your video have helped me do multiple installs bro!

    • @KennyVo
      @KennyVo  2 ปีที่แล้ว

      Thanks! That’s neat lol, yeah for sure. I daily this car so I’m really all over the city lol. I’m glad these videos helped, sharing what I know is ultimately my goal here 😊

  • @teez390
    @teez390 2 ปีที่แล้ว

    Clean definitely need a set!🤙

    • @KennyVo
      @KennyVo  2 ปีที่แล้ว +1

      Highly recommend these!

  • @Drew_Tuber
    @Drew_Tuber 2 ปีที่แล้ว

    Dope video thanks for making the video!

    • @KennyVo
      @KennyVo  2 ปีที่แล้ว +1

      of course! thanks for watching 🤜🏼

  • @SonnyD95
    @SonnyD95 2 ปีที่แล้ว +1

    I was planning to do this for sometime, just have kept postponing it lol Glad someone did this! Looks awesome. So every time you go for a drive at night, the foglights will be a different color? Or they only switch colors when it's a rapid switch on/off.

    • @KennyVo
      @KennyVo  2 ปีที่แล้ว +1

      the fog lights will be whatever color you switch it to, rapid switching/slow switching will do the same thing. It starts up white then if you switch the fogs off and on it will turn yellow, switch again then white, it’s just back and fourth lol

    • @SonnyD95
      @SonnyD95 2 ปีที่แล้ว

      @@KennyVo ah interesting! How well do they match your headlights?
      Also thank you for sharing links. Might get these fog lights instead of the winjet, if they work as well.

    • @KennyVo
      @KennyVo  2 ปีที่แล้ว +1

      @@SonnyD95 The fog light on white claims to be 6000k which has a slightly more blue tint than the headlights. The output itself is white.

  • @its_1chain
    @its_1chain 2 ปีที่แล้ว

    Loved the vid & kit

    • @KennyVo
      @KennyVo  2 ปีที่แล้ว +1

      thanks for watching 🥹

    • @its_1chain
      @its_1chain 2 ปีที่แล้ว

      @@KennyVo anytime brother

  • @JR28K
    @JR28K 9 หลายเดือนก่อน

    Just got my car back last week. It was stollen had my bumpers fixed. Will this one fit on the 2018 is300 fsport. Cant find a kit for it. Only 2016 bezel.

    • @KennyVo
      @KennyVo  8 หลายเดือนก่อน

      Stollen, jeez sorry to hear. These fogs are for the pre face lift IS 2014-2016. The facelift one you have 17+ fsport does not have aftermarket fogs but the non fsport 17+ does and people cut those out and jb weld it to your "vent duct" where the fogs would actually go. if you're on Instagram @grey_3is makes the fogs, and paints them the same bezel color. Hope this helps.

    • @JR28K
      @JR28K 8 หลายเดือนก่อน

      @@KennyVo thanks! It does. Been having a rough few months. They tried to steal it again a second time, now my motorcycle but failed. Now someone hit it now I have to fix it again but luckits not totaled.

  • @BrightBoyRandy
    @BrightBoyRandy ปีที่แล้ว

    This was very helpful
    Thank you!
    But I have one little issue. Do you know why my fog lamp indicator won’t light but fog lamps work fine? Thank you very much !

    • @KennyVo
      @KennyVo  ปีที่แล้ว

      The OEM foglight indicator is if you wire it to the OEM foglight harness. Also the ones that have it have a stalk with the foglight switch on it. Its like a secondary dial. The one on ours with one click up is DRL for tails and the DRL light itself

  • @Parsalebosslessandog
    @Parsalebosslessandog 2 ปีที่แล้ว

    Where do you hide the set of wires that connect the two fog lights to the battery and button? How do you undo the wheel well?

    • @KennyVo
      @KennyVo  2 ปีที่แล้ว +1

      its hidden in the plastic thats right above the fender/wheel well in the engine bay. for the wheel well there is a few plastic tabs that you have to remove using a flat head to twist off the skinnier ones and then basically prying the larger ones.

  • @tau_tv
    @tau_tv ปีที่แล้ว

    hey, now that you have had this for a while, which do you think i should install? the ijdm ones or these?

    • @tau_tv
      @tau_tv ปีที่แล้ว

      Okay I watched the whole video and I’m gonna get these. Thanks for the in depth tutorial as always

    • @KennyVo
      @KennyVo  ปีที่แล้ว +1

      @@tau_tv No prob! sorry for the late reply, these are way better

    • @tau_tv
      @tau_tv หลายเดือนก่อน

      @@KennyVohey man, I finally got around to checking my box and found out they didn’t give me a switch. Any fog light switch should work right ?

    • @KennyVo
      @KennyVo  หลายเดือนก่อน

      @@tau_tv yes any should work

  • @TheMadIsRealXXR
    @TheMadIsRealXXR 2 ปีที่แล้ว

    Wish they made these for the RC 😩

    • @KennyVo
      @KennyVo  2 ปีที่แล้ว

      I've seen RC have fog lights but I'm not sure if they really have a good aftermarket support for them or even if the bulbs are interchangeable. Need to get my hands on one to see lol

  • @andrewjordan8713
    @andrewjordan8713 2 ปีที่แล้ว

    Hi where did you get the switchback turn signals for your mirrors ?

    • @KennyVo
      @KennyVo  2 ปีที่แล้ว

      Hey they’re dynamic signals from TansoWerkz! You can get it here tansowerkz.com/product/sequential-smoked-mirror-turn-signals-3isrcgs/

  • @shayanmehdi2229
    @shayanmehdi2229 2 ปีที่แล้ว

    Hey bro what happened to your front lip? It’s not installed in your car anymore

    • @KennyVo
      @KennyVo  2 ปีที่แล้ว

      broke lol, these driveways too steep and so much debris on the road here

    • @shayanmehdi2229
      @shayanmehdi2229 2 ปีที่แล้ว

      @@KennyVo oh damn..I liked your installation so much I ordered the same ones

    • @KennyVo
      @KennyVo  2 ปีที่แล้ว +1

      @@shayanmehdi2229 I have another one lying around just need to paint match it. It's pretty durable and takes a lot of hits lol. Its just that im lowered and yeah my driveway is steep at the entrance.

    • @shayanmehdi2229
      @shayanmehdi2229 2 ปีที่แล้ว

      @@KennyVo ah got it

  • @stevendinh3470
    @stevendinh3470 2 ปีที่แล้ว

    Can I put this on an RC 300?

    • @KennyVo
      @KennyVo  2 ปีที่แล้ว

      this is specific to the 3IS platform. the bulbs itself can be added to any vehicle but for the RC i believe they only make OEM one with the housing for the lower grill and assembly. i read that it is like our headlights so you cant remove the bulbs in the RC

  • @bryantmunozsantos2532
    @bryantmunozsantos2532 ปีที่แล้ว

    WILL THIS FIT A 2018 IS300?

    • @KennyVo
      @KennyVo  ปีที่แล้ว

      This is for preface lift 2014-2016.

  • @xav264
    @xav264 ปีที่แล้ว

    clear signals in headlights?

    • @KennyVo
      @KennyVo  ปีที่แล้ว

      I had amber LED signals but swapped them to white for a cleaner look. Very bright and noticeable still.

    • @xav264
      @xav264 ปีที่แล้ว

      @@KennyVo how? You baked the headlight open?

    • @KennyVo
      @KennyVo  ปีที่แล้ว

      @@xav264 the bulb for the blinker/signal is interchangeable you can remove it just by twisting the bulb housing counter clockwise

    • @xav264
      @xav264 ปีที่แล้ว

      @@KennyVo do you have link for led?

  • @UnknownUser-zw9od
    @UnknownUser-zw9od 2 ปีที่แล้ว

    Oh shit.. the secrets out now lol

    • @KennyVo
      @KennyVo  2 ปีที่แล้ว

      hahah it's game changing!

  • @kevinly1112
    @kevinly1112 2 ปีที่แล้ว

    🥵🥵

    • @KennyVo
      @KennyVo  2 ปีที่แล้ว

      🫡🫡

  • @tima8495
    @tima8495 2 ปีที่แล้ว

    քʀօʍօֆʍ 🤩

  • @tuando4479
    @tuando4479 2 ปีที่แล้ว

    Do you wanna trade car ?

    • @KennyVo
      @KennyVo  2 ปีที่แล้ว

      yes pls🫰🏼

  • @n3morest184
    @n3morest184 2 ปีที่แล้ว

    what does the little green wire do that u tapped into I think I blew a fuse or something

    • @KennyVo
      @KennyVo  2 ปีที่แล้ว

      it serves as a positive power that comes on and off when the car is on or off position when the interior button lights come on for the odometer button etc. when tapping make sure the light position is off and the ground is not making contact with anything else

    • @n3morest184
      @n3morest184 2 ปีที่แล้ว

      @@KennyVo I think I might have blown that fuse do u know where it's located thanks in advanced