Your attention to detail even when mowing down brush is great to see, you have the ability to see the end product before it’s done which ends up saving you time and money. Great work. 👍🏻🇺🇸
For those who don't operate some of these types of equipment, you should look at some of the heavy duty "mowers" out there. They'll take down a 4 inch tree and give you kindling. The drum cutters are even more powerful, chewing through 12' trees. First time I hit a deer carcass, I thought I'd killed someone. High-flow hydraulics are not toys. Good to watch someone like Chris operating one, and using proper caution. Those 'mowers' can sail rocks and logs a long way. Keep up the fine work Mr. Chris.
@@kjwoodlief the worst episode was in Austin, where I was clearing a piece of property near downtown. Started working before sunup, and nearly ran over a homeless camp. To have someone pop up in front of you, with all the dust, debris and flood lights, makes you jump a little. 😉 Bet it got their heart beating a little as well.
I like the stick view. It gives a better view of you breaking those trees into smaller pieces. Most of us know what you’re doing. But to someone new to this type of work, it gives them a birds eye view of what’s happening and a better understanding too. 👍🏻
add when the machine needs a low boy and they have to hire a moving service, since that is an expense they can't bill for and have to pad bills with minimums and high hourly rates to cover.
Well the camera on the boom is like an inverted Disney Mr. Todd's wild ride! Brain wants to turn everything over and yet that isn't the right way either. Thanks for sharing your day with us! Have a good evening and we will all be here waiting for you tomorrow!
I've been noticing for a while now how high the mud flaps are on the dump truck when he's "reverse spreading." I mention this because I drove semi for 25 years and one of the many jobs I had over that time was running a 35-yard end dump. I remember DOT regulations for the mud flaps were no more than 4" in off the ground (on any truck) which made it hell to reverse spread. Still could do it but have to make sure to go thin. Even just backing into a job site you could tear them off I just going through some soft mud or something and then you see him laying out in front of you after you backed up. So what you do to get around their DOT regulations is you get out to your cordless drill and a couple wrenches and you drill new holes about 3in" down and mount them in the new holes. Now you're good to go. On the off chance that you might get pulled over for a random inspection once a year or so they will generally let you slide on the fact that you made the effort to fix the problem rather than just ran without mud flaps which would be a much greater problem. If you got the one DOT cop that wrote you a Fix-It ticket then you just put new flaps on long enough to go have it inspected and then you put the old flaps back on
It's incredible how little is left after the brush cutter mows down those big weeds. At one point, the skid steer reminded me of a boat bouncing across waves as it rode the bumpy ground.
well sitting here almost to the end of the video and kinda in a near sleep trance when my 5 year old grandson walks up behind me to see what I am watching and he hollers. "The Claw!" and now I am wide awake and he wants me to start the video at the beginning. :)
Well so far people think you need shims in the thumb. and your mower sound like something is wrong with it. and the bucket slapping around would drive him nuts.
That was the new one60 it don’t have no slack in the bucket of it yet. Chris takes real good care of those machines whether it be his uncles or his own it gets greased every day. JS. Lol
Nice job Chris.a Lot of trees and brush To get rid of.i liked the mowing action on the skidsteer there😁 funny Stuff. Cant wait To See when the pad is gonna get built👍.stay safe man.
Another great video Chris and I was wondering if you ever put the new side boards on John‘s dump truck but anyway brother you and John stay safe and keep the videos coming
Seem like a lot of movement on that upper cylinder pin for the thumb might want to put some shims in that I noticed it on the video while you're looking down the Boom I might want to check that love watching your videos enjoy watching how smooth you are with that big machine it's hard to make it look that easy but somehow you get her done
Tree snappin' machine !! I like how you have the machine on a slight angle when you go to break the trees , the way your set it grabs it on that slight angle and breaks them just about perfect where ya want them to break !! lololol.... My wife says I'm weird to catch little shit like that !!lolol...Ol Unk , gettin' his backwards spread on !! Nice !! lol....Great as always Chris, Have a Great Evening Man !! On to the Next...
I love how you have a good idea of how home lot your and ideas on how you can make a pond from the ground up and your excavator work and my name is Richard Donovan and I live in Pacific Pines qld 4211 gold coast Australia
If you look round about the 27 min. mark, you have a quite a bit of slop and slide on the linkage for the thumb... This produces the clanking and must be wearing .
I am surprised the developer was allowed to let weeds grow that tall. In my area (N FL) most places require the owner to keep weeds cut down to prevent habitat for rats and other pests. Not kept mowed like a yard, just not overgrown.
Chris is a regular Billy Mayes commercial all in one! He slices, he dices, he cuts he chops, he has a delicate touch and a strong arm! It's Chris the Ultramatic All In One Digging Extraordinaire! Your Ultimate Home Improvement Specialist! But Wait there's More!!! He can Rack the Ric! he can Drain the Swamps, he protects the wildlife and endangered... He's the all around Ultimate Destruction Machine, He's Karen's worst nightmare with a match!... But sorry folks there is only one! no buy one get one free offers for just postage and handling! Nope they broke the mold, so his time supply is limited. Order your time now while the grease pins are still soft and pliable.This offer is not valid, only the man himself can sell his wares. So Get your LetsDig18 On Today! lololol
@@southernhomesteadtransformatio all is going good for me just sitting around being lazy and putting on weight lol. How are thing's going for you these days.
Nice hair cutting machine . Really close shave. LOL. You cut the brush, so there would not be so much over burden to mix with the shaved road dirt. Cleared the sides for better landscaping for looks. Is that right? Another nice start on a project.
Pete that is his uncles brand new 160 it does not have slack in the bucket or the thumb that is just ordinary noise that the bucket and thumb makes. Lol
Hey Chris why not talk a little bit more about the specs about the equipment and options they can have and also the technical side of how or what you do when you grade and blueprint things
Them ‘little’ trees you just grab and pluck out the ground, could you do a size comparison like when you stand next to the bucket and do a scoop comparison? Them little trees look like twigs but I bet they’re still decent size trees 😂
Sometimes those spindly pines getting cleared are just like pulling teeth. Nothing better, nor nothing more you can do, but just grab and tear your way through.
I've seen him hit yellow jacket nests a couple times and he shut the door to keep them out. I don't know about NC, but in GA they are mean as all get out when you dig up their nest and are pretty common.
It's already got roadbase from whoever was trying to subdivide all that property, it's well established just needed cleaned and topdressed with stone, if Chris was having to build the road from scratch I'd agree with the fabric, plus I also didn't see any wash spots and it's only going to have this one guy and his shop, it'll be just fine.
Your attention to detail even when mowing down brush is great to see, you have the ability to see the end product before it’s done which ends up saving you time and money. Great work. 👍🏻🇺🇸
To Chris 👍🏼🇺🇸 another building Lot taking place Good to see America on the move 👍🏼🇺🇸 Jennifer from Australia 👍🏼🇦🇺
The camera angle on the stick is great!
For those who don't operate some of these types of equipment, you should look at some of the heavy duty "mowers" out there. They'll take down a 4 inch tree and give you kindling. The drum cutters are even more powerful, chewing through 12' trees. First time I hit a deer carcass, I thought I'd killed someone.
High-flow hydraulics are not toys. Good to watch someone like Chris operating one, and using proper caution. Those 'mowers' can sail rocks and logs a long way. Keep up the fine work Mr. Chris.
I bet that deer carcass did scare you. I laughed.
@@kjwoodlief the worst episode was in Austin, where I was clearing a piece of property near downtown. Started working before sunup, and nearly ran over a homeless camp.
To have someone pop up in front of you, with all the dust, debris and flood lights, makes you jump a little. 😉 Bet it got their heart beating a little as well.
@@johnthompson9625 Wow! Those things are dangerous. You have to be really careful with them.
I like the stick view. It gives a better view of you breaking those trees into smaller pieces. Most of us know what you’re doing. But to someone new to this type of work, it gives them a birds eye view of what’s happening and a better understanding too. 👍🏻
Like that view with camera on the stick. Shows you a whole new perspective on the clearing.
A good idea would be to explain the equipment (trailers) needed to move the various equipment you use!
add when the machine needs a low boy and they have to hire a moving service, since that is an expense they can't bill for and have to pad bills with minimums and high hourly rates to cover.
Not only LD18 is my favorite Destruction/Construction channel... Chris has crossed over to my favorite mowing/lot clearing channel... : )
Well the camera on the boom is like an inverted Disney Mr. Todd's wild ride! Brain wants to turn everything over and yet that isn't the right way either. Thanks for sharing your day with us! Have a good evening and we will all be here waiting for you tomorrow!
I've been noticing for a while now how high the mud flaps are on the dump truck when he's "reverse spreading."
I mention this because I drove semi for 25 years and one of the many jobs I had over that time was running a 35-yard end dump. I remember DOT regulations for the mud flaps were no more than 4" in off the ground (on any truck) which made it hell to reverse spread. Still could do it but have to make sure to go thin. Even just backing into a job site you could tear them off I just going through some soft mud or something and then you see him laying out in front of you after you backed up. So what you do to get around their DOT regulations is you get out to your cordless drill and a couple wrenches and you drill new holes about 3in" down and mount them in the new holes. Now you're good to go. On the off chance that you might get pulled over for a random inspection once a year or so they will generally let you slide on the fact that you made the effort to fix the problem rather than just ran without mud flaps which would be a much greater problem. If you got the one DOT cop that wrote you a Fix-It ticket then you just put new flaps on long enough to go have it inspected and then you put the old flaps back on
It's incredible how little is left after the brush cutter mows down those big weeds. At one point, the skid steer reminded me of a boat bouncing across waves as it rode the bumpy ground.
You've done an awesome job!
I would love to see Chris do a live stream of him working unedited that would be awesome
The Camera attached on the outside to your Boom is Great. The Claw gets quite the Workout. 👍
Well done bud great lil job to have .keeps bringing on more and more .quality counts not speed all tho ya have both going for ya ..godbless
I was hoping for a BAFire from all that brush!!!! Love the burn videos!!! Keep up the good work.
That machine is a Monster,
Awesome video, Thanks for taking Gramma along. 👍♥️
That brush cutter is just the thing I need for clearing my garden path...
👍👍👍 amazing job from Malaysia 🇲🇾🇲🇾🇲🇾🇲🇾
well sitting here almost to the end of the video and kinda in a near sleep trance when my 5 year old grandson walks up behind me to see what I am watching and he hollers. "The Claw!" and now I am wide awake and he wants me to start the video at the beginning. :)
Mechanized labour, work smart, (with some amount of hard) Good job boss. Please continue work safely.
Stick cam gives me a dizzy feeling. Great video. You can really handle that excavator, just like an extension of your body. Thanks for sharing!
It never fails to amaze me how powerful your excavator is. It was pulling them trees out of the ground like weeds.
Like weeds?
It's North Carolina. Trees grow AS weeds there.
Well so far people think you need shims in the thumb. and your mower sound like something is wrong with it. and the bucket slapping around would drive him nuts.
Haha! Yep!
Nah. It sounds like someone working hard.
That was the new one60 it don’t have no slack in the bucket of it yet. Chris takes real good care of those machines whether it be his uncles or his own it gets greased every day. JS. Lol
@@timmyfrierson2684 Thanks
Iwas just repeating some of the comments already being put out there. I know he takes best care on his equipment
Chris great job u n yur crew.... 👍🤓
The upper pin for the thumb could use some shims, video shows it at 26:20 thru 28:50 but as usual an awesome job Chris.
Excellent stuff , very enjoyable, thanks 🇮🇪😎🚴♀️🤠🏊♂️🚜
Good job Chris 👍👍
Thanks for the video Chris 👍🇬🇧🍺
Really good view from thumb side down!
Looking to be a good little project bro. Y'all stay safe
Nice job Chris.a Lot of trees and brush To get rid of.i liked the mowing action on the skidsteer there😁 funny Stuff. Cant wait To See when the pad is gonna get built👍.stay safe man.
Hey, another nice job report from NC! @3:00 I don't wanna get my feet under that thing. ;-)
Great job Chris on to the next project, BATA BING BATA BOMB,
!!!!
Nice job Chris
You handle the heck out of your machines
Looks like a job for your Kubota and brush hog. :)
Making good progress! Show me more!
Great camera work!!! Cheers!
Love how the skid steer brush hog decimates anything in front of it! :
Chris you should do a yard tour showing off your machines.
When in a residential zoned area, do you have to have to have a permit to do land clearing?
Another great video Chris and I was wondering if you ever put the new side boards on John‘s dump truck but anyway brother you and John stay safe and keep the videos coming
the mulch would be good to put around the pond for when you have plants and sell it for people to used around there garden's
Seem like a lot of movement on that upper cylinder pin for the thumb might want to put some shims in that I noticed it on the video while you're looking down the Boom I might want to check that love watching your videos enjoy watching how smooth you are with that big machine it's hard to make it look that easy but somehow you get her done
The boom camera angle shows you could use shims on the thumb cylinder hinge. The ram cylinder slides side to side.
Tree snappin' machine !! I like how you have the machine on a slight angle when you go to break the trees , the way your set it grabs it on that slight angle and breaks them just about perfect where ya want them to break !! lololol.... My wife says I'm weird to catch little shit like that !!lolol...Ol Unk , gettin' his backwards spread on !! Nice !! lol....Great as always Chris, Have a Great Evening Man !! On to the Next...
You edit out the best parts... it's like pulling of the kfc skin and that's the best part
at least these trees are small and easy to remove.
I wish I could get you to come to va to do my clearing and building pad.
Really have learned quite A lot of ways to operate machinery
Hi Chris, looks like you could do with a shim in your thumb linkage.
Enjoying the show
Those weeds played hell on my seasonal allergies
I love how you have a good idea of how home lot your and ideas on how you can make a pond from the ground up and your excavator work and my name is Richard Donovan and I live in Pacific Pines qld 4211 gold coast Australia
Skillful truck driver dat 👍
Looks like the thumb cylinder pin is mighty loose on that beast! (28:41)
That thumb cylinder pin eye supposed to have some shims? Seems like that back and forth slack could be reduced a bit.
is there no continuous flow button for attachments such as brush cutters, my old machine has one ?
If you look round about the 27 min. mark, you have a quite a bit of slop and slide on the linkage for the thumb... This produces the clanking and must be wearing .
Hey Chris, Have you had the fluid flow checked on the skid steer when using the brush cutter?
From the stick camera it sounds like thumb is breathing when it operates! Oh yeah it’s just a chewing up those trees.
Well when you get done with the skid steer with the mower just drop it off at the house lol
is there a high flow hydro system on that machine?
I am surprised the developer was allowed to let weeds grow that tall. In my area (N FL) most places require the owner to keep weeds cut down to prevent habitat for rats and other pests. Not kept mowed like a yard, just not overgrown.
James Rawlings North Carolina is not Florida. Mostly. Lol
@@cathiwim, I'm in Western North Carolina and there is too much Florida here to suit me.
Hi love your vids that top pin in the claw looks a bit slack could that cause damage moving so much
Stay safe bud and keep diggin
Not only can he set individual rip rap, toss corn hole bags, but he can fold laundry too!
Chris is a regular Billy Mayes commercial all in one! He slices, he dices, he cuts he chops, he has a delicate touch and a strong arm! It's Chris the Ultramatic All In One Digging Extraordinaire! Your Ultimate Home Improvement Specialist! But Wait there's More!!! He can Rack the Ric! he can Drain the Swamps, he protects the wildlife and endangered... He's the all around Ultimate Destruction Machine, He's Karen's worst nightmare with a match!... But sorry folks there is only one! no buy one get one free offers for just postage and handling! Nope they broke the mold, so his time supply is limited. Order your time now while the grease pins are still soft and pliable.This offer is not valid, only the man himself can sell his wares. So Get your LetsDig18 On Today! lololol
@@audreywilt5608 you nailed😁
Good view from the boom break up trees.
Hey Scruffy, hope all is well!.... :-)
@@southernhomesteadtransformatio all is going good for me just sitting around being lazy and putting on weight lol.
How are thing's going for you these days.
@@scruffy6151 LOL....I have been chipping away at it one day at a time!
@@scruffy6151 I just today used the Chain shortening device you suggested I make....works great!
@@southernhomesteadtransformatio i am watching you dropping your thumb video i will comment on your channel.
Talk to you soon.
Nice hair cutting machine . Really close shave. LOL. You cut the brush, so there would not be so much over burden to mix with the shaved road dirt. Cleared the sides for better landscaping for looks. Is that right? Another nice start on a project.
That bucket slapping around would drive me nuts........
Pete that is his uncles brand new 160 it does not have slack in the bucket or the thumb that is just ordinary noise that the bucket and thumb makes. Lol
Hey Chris why not talk a little bit more about the specs about the equipment and options they can have and also the technical side of how or what you do when you grade and blueprint things
There is a problem with this video. Where's the water? The soupy mud?? Are you becoming a landlubber on us? Great vid as always.
Hey Chris, ever thought of using a smaller front end loader instead of the skid-steer?
Does that mower have a balancing issue on its hub or does it shut down automatically when you lift the mower head?
As Chris said... "It sucks". The mower is low flow and needs to be lifted so it again starts spinning.
Not sure what camera you used but right after you finished mowing it was screwed up
Them ‘little’ trees you just grab and pluck out the ground, could you do a size comparison like when you stand next to the bucket and do a scoop comparison? Them little trees look like twigs but I bet they’re still decent size trees 😂
Damn son, that mower deck is a boss!
What brand(?) is it? I may have to try to rent something like that next Spring.
Yessir folks in the Carolinas got lots of money.... I hope he didn't pay developers price for the land.
What is the hydraulic bypass whine?
Sometimes those spindly pines getting cleared are just like pulling teeth. Nothing better, nor nothing more you can do, but just grab and tear your way through.
good video
Bucket POV 👍💪
looks like you need some spacers on the thumb
Tha grapple cylinder need bushing , Tel your uncle and it's new 160 .
That truck sure holds a load of brush !
Crunch crunch crunch crunch crunching away
I'm really surprised you don't run into any bee hives ..
I've seen him hit yellow jacket nests a couple times and he shut the door to keep them out. I don't know about NC, but in GA they are mean as all get out when you dig up their nest and are pretty common.
@@georgiapatriot4575 I know we have them here in N,.J. when I cut the grass
You should be a director
👍👍👍👍
No geotextile under the stone, usually you do!!
It's already got roadbase from whoever was trying to subdivide all that property, it's well established just needed cleaned and topdressed with stone, if Chris was having to build the road from scratch I'd agree with the fabric, plus I also didn't see any wash spots and it's only going to have this one guy and his shop, it'll be just fine.
Is that a loose bucket on that new 160? Or is that the old 160?
can’t believe it wasn’t full of abandoned vehicles,car tyres, drums of industrial waste and concrete
And shopping trolleys 😁
roadrash90 shopping carts to us Yanks, and buggies if youre from the rural South 😁
Thumb needs some shims where it pins to the boom
Is this a regular brushog or or dimand blades
finding dry dirt right now at a premium in your area?
The small Volvosaurus eats trees as good as the big one.
do you do jobs by the hour or by job?
That thumb could do wi shimming alot of sideways movement
👍👍😀🍁
Yep...that thumb needs shims both sides. It's got enough play to beat itself out of round. I thought that was your new one for a second...