Nitro Shop Time
ฝัง
- เผยแพร่เมื่อ 13 เม.ย. 2019
- Hey guys, I'm Kevin Talbot. This is a dedicated RC Channel. No music, no distractions just RC. If you wanna see more 'edited' versions of these videos with some music mixed in then check out my main channel here: / @kevintalbottv
- บันเทิง
I'm only watching this now, three years later and I can honestly say that if you watch two Blokes who are great Mates, having a great time with their RC's and not love it, then the world has lost something.
The movies with you and Stemp in them, especially on the river and such, are my favourite. You Two are such great Mates, and I love watching you Lark about.
So yeah, even Three Years Later, it was Bloody Worth it.
Cheers Guys ❤
you're not the only one!
i have searched every corner of the inter webs trying to find out what happen to stimpy i haven't seen him on this channel in quite some time? anybody know? does he have his own TH-cam channel? and was there a falling out cause i loved these too there is just nothing like there chemistry @@DrewBoyFTW
I love listening to these while I wrench on my own RCs.
I've watched this episode about 5 times it's great to fall asleep too and then you wake up to the sound of the car starting It makes me never want to touch my Nitro RC 10
Stemp next time a little fine sandpaper where the slip bearing contracts the crank shaft. just take the shine off the contact area to give the bearing something to grip.....cheers man
What a pair of lads😅
I thought they were gonna kiss at the end.what a cute couple 🥰 3.17.55
Love it
Only a quick stream kev said at minute 2.3hours plus🤣😅😂🙏 3rd time watching this. You have to love the bodgery by the master 😅🤣😂🙏❤️
Can tell how much u used to listen to Rave/House Music with all the Oi Oi's😄 and in da house's. Lol😂 🤣
What car is that and what engine
You are 1 of my 2 favorite RC channels but I would love a couple more pub vids that was so much fun!! But thats just me, keep it up Kevin 🤘 always got support with me!
Tip nitro out hold the exhaust as you put it and then you know she start right away chaps
I enjoy the live for the conversation :)
"Just gonna be maybe an 1hr video, gotta get up early." 3hrs later...... keep em coming Kev.
Ifii
Shinanigans io
@@jackyboy2213 ใจแค่
9v stamp will light that glow plug
missed live feed, but just watched from start to finish, epic good times lol
I remeber my little acme NB16 similar to this one 🤣🤣 sold all my nitro suck to brushless, got fed up of the constant tinkering and carbs clogging up.
Nitro is awsome, that is an team associated mgt
Hey I missed the live feed but watching it now, whats up Stemp n Kev!
I
You should get your own trailer and pull the monster truck with Andy the landy
I liked that vid dude. I think you should get the 1:16 WLtoys up and running in brushless and race Stemp against this little car.
The clicking in the xmaxx may be comming from a lose pin inside the planetary gear. I was told by my local hobbyshop that its common when you put high torque on it like using the self righting function. My xmaxx is doing the same clicking however i dont seem to notice a problem with it other than the sound.
Shout out from Norway
Do a battery check next time guys, and do a range check lol. Good run Man
I had to leave early sadly but i enjoyed it guys!
Still watching
I would love a nitro rc
Is this a GM Mini B16 Nitro? I have the Brushless version for 12 year now, it was my first RC car. Unfortunately nowadays it’s hard to get spares for it.
I love your chanl
Wow a nitro on the show
Hey Kev from South Carolina
Hi there I am your big fan
Made it through this entire epic quest....and the law of breakage rules all
Alex from America, love the nitros stumpy boosts content value In my opinion 😉 😄
Good stream Kev
Bye the time you bogged all that you could off charge the good stick 😂
Looks like a couple guys have the munchies.
Yes the granite 4x4 blx
kev looks like dexter if he had glasses stemp looks like jimmy neutron from the cartoons thats a god thing lol hell i look like pluto from popye lol
The clicking in the XMAXX is the steering servo...
Good thing you brought all that fuel
Kevy, every video you put out puts a smile on my face 😁
Michigan here
3 hours of foreplay for 1 minute of pleasure! 🤣
LMAO that's a good one
Have you ever had a thunder Tiger Nitro buggy and I've also got a night race Skyline touring car
Hahaa goes round them all like noo can't let ya use that one haha
You review everything but the car i have wltoys a242 1/24 would like to see something on that for a small car it real nice only problem is parts are nonexistent lol anyway u can give some advice on maybe buying a cnc machine to make parts i want or maybe u can point me to a rc part deisgner that can make them probably way more expencive than needed to b but you give great insight and reviews hope to hear back or see a video on these cars
1:57:44 That uhhh... Li-Po safe looks like a GGGGRREEAAT! Way to nuke all your Li-Pos in one gigantic fireball in one go should just one let go...
Trick a lot of people use is Concrete masonry breeze blocks, the ones with the holes in that don't go all the way through. A battery in each hole with a Ziplock bag full of sand on top. So if a Li-Po goes while charging it melts the ziplock bag and buries the Battery and contains the fire, and the concrete walls keep the heat from the batterys in the other compartments.
Dirt cheap too, much cheaper than having a Lipo safe bag for each Li-Po....
my HPI FS 10T nitro started doing the free spinning pull starter today ffs. Whats the issue and how does one go about fixing it please?
Cool put together ones but I have just electric one didn't like gas
Thanks for reminding me of why I have boxes & shelves of nitro stuff gathering dust. lol
the batteries you pulled out of the glow plug was 1.2v in series. meaning it was running 2.4v. you have connected up all those 1.5v batteries in parallel, giving you 1.5 total volts.
Great
Lets get him on temprature
Where would you find a gas powered rc
Hey, the fruitcake bun is gone! Nice
Hey guys grorgie smith here thunderbay been watching for a while i just moified my rustler vxl to 3s lipp and put bandit bidy on it andv16 tooth sprocket on motor insane everyyime i use it i break somthing it does back flips i just btoke axle i put bigger tiiires andvtims on it 33/4 , tires on it and wheely bar on it insane boys ive been wstching lot s i could just imaggine 4s its a blast
Is that a hpi wheel king I see or a nitro monster king??? I want to buy it if so.
Sup from PA kev
You've relived the terror of nitro for us all, now we can all remember why we have electric again. ;]
Are you going to get the Traxxas XRT
What about building a 1/14 scale Scania Tamiya truck and trailer to match your monster truck
I fill the carb with fuel and it will take off for a second then it will idle normal
Have you had an axial yeti..???????
It will work if you use a 9v just to get the glow plug going iv done more then . Once and it work
That's how I break stuff.fix it for hours to break it in ten seconds..wltoys 12428 is gonna be here this week.already have some 2s packs made up n ready.
Me agsin i purcasedcd 2 mgt nitro s been runnkng homade fuel out of methanol and caster oil prrtty crazy im hooked on speed and power any sggedtons on tuning them we can not get nitro in town ..any ideas on good supplyer to order from thanks boy basher for life oldest teenager i know ..
Leeds!! But I used to live near you boys in bse
I love my tmax
Ffom the start. Its worth it
Florida America
Good Kev 👍
U can get that little nitro from nitrotek
what is a cap pack and how does it work??
Clean carb with some sea foam ? Clean barrings with break cleaner then spray silicone liquid wrench.Take the compressor and blow it out .Im a gangster From Detroit Mate the Mow-ar City 🌃
Vap batter will work
that was funny haha
Hello from The netherlands
I have two nitro cars but one I got yesterday and it hasn’t ran in about 16 years and I’m trying to get it to run but my other nitro runs but the clutch broke
😔 So have a good day out bashing stamp and ken 👍
Need more nitro stuff please
Yes
Yo Kevin u should get a revo 3.3 they are bad ass
Car finally starts
Subtitles: [Applause] [Music]
Hi guys I'm mark from London. I've got a rs4nitro. Where r u from
Why are your pupils so huge kev??? At around 3hour mark when you get ready to go out side
What's the name of this rc
I swapped out the engine with a 9port o.s racing motor. Took a lot of work but its blistering fast. Please stop yelling.
I got a savage nitro and nitro condor
What is the name of the buggy
Kevin get your on monster truck trailer then you don't have to rely on anyone else
Too rich I'm an expert 😁
What kind of motor you guys got in that buggy
Hai
ok na
Ggr4d
Hi Hi Hi po
ok
Nitro RC's can be awesome when there running right but also can be frustrating LOL
They`re*
ffs..
And you can`t run them in residential areas, not in most places anyway.
Andy from Lynchburg va
Little buggers fast
Lol finally got it going after 4 yrs
Hey kev im having trouble will my revo 3.3 it wont suck fuel in the carb .... Through the lines and i went through five glow plugs today it started right up then died now it wont suck any fuel in the carb
@Stri Ker no the carb isn't cracked i found out it was just the tune was off
@@alexrcworld4357 I reccomend rebuilding your carb. Theres most likely old fuel gummed up In there or the black ring below the hsn isn't aligned with the needle to let the fuel in. Or the way the lines are wrapped around the roll bar limit the flow.
Put your finger on the exaust
HI
HI
HEY
Heat the engine up
rc maddness amazing how much that matters.
Block the exhaust and pull the fuel through to prime the fuel into the motor
I have 4 Trinity next 2 are nitro and 2 electric
Canterbury UK
You should do a giveaway on 3X maxes
No bloody nitros!!!! 😂 I like peace and quiet!!! 😣
My dad never spent a 250k on me if I lived 20 lifetimes
Run with it letter RIP
If only if they keep running