Sir mere pass ufst blue box he usme bhi adopter laganeka pinout hai usme kamhosaktha hye ya nahi sir uska online support bandhogaya hey magar latest model thak update arahahe please saliution dejiye sir thankyou
Forcing erase device... SET_BLOCKLEN failed (return code: 2, CMD Error: CMD CRC fail) !!! CMD7 error, cmd response: 0xFFFFFFFF, card state: 3 (Card is in standby state) status: An erase sequence was cleared before executing because an out of erase sequence command was received
Chand sir Aapka pinout Idea tarif e kabil h aapka jugad professional rehta h manufacturers aapke video ko dekh k award dena chahiye
thank you
Good saliution we need this type of vedios
Chand chand laga diye aapne aaj...
Apka mai sab video dekhta hun bahat achha training dete hen aap.ap ye sab kese pata kar lete hen.
mujhe elctronics ka kaam karte 20 saal se zyada hogaya he aur aap logon ki duaaon se bhi ALLAH meri madad karta he
Bahut khoob nice video like it.
great man in the world
thank you
Awaz v apki bahut acchi hai guru
because it connects the VCCQ connection if it is only VCC, JUST CONNECT the VCC AND ALSO make the connection with UFI BOX
supper bhai
Thanks
Sir mere pass ufst blue box he usme bhi adopter laganeka pinout hai usme kamhosaktha hye ya nahi sir uska online support bandhogaya hey magar latest model thak update arahahe please saliution dejiye sir thankyou
mene ufst kabhi use nahin kia
Connection status: XHCI:HUB3:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-1521
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 20, CMD Error: Invalid response) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---
When i was trying VCC 2.8 then card recognize but auto mood not recognize ....
when VCC 2.8 card not erasing......
What should i do...........
Connection status: XHCI:HUB3:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-1521
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 2.8 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: high-voltage (2.7-3.6V)
Card/BGA: Card (removable) - SDHC
Manufacturer ID: 0x00 (Unknown)
Product name: APPSD0 (0x41505053443088), rev: 0x08, serial number: 0x00888800
Manufacturing date: Oct 2007
CID: 00000041 50505344 30888888 8800AA38
CSD: 400E0032 53590000 FF9FC01F 0A400082
Partition info:
User area: 31.95 GiB(34,309,406,720 bytes)
Erasing userarea data... Failed to erase block 0 (return code: 2, CMD Error: CMD CRC fail)
cmd response: 0x700, card status: 0x0, card state: 3 (Card is in standby state)
status: unknown (0)
Forcing erase device... SET_BLOCKLEN failed (return code: 2, CMD Error: CMD CRC fail) !!!
CMD7 error, cmd response: 0xFFFFFFFF, card state: 3 (Card is in standby state)
status: An erase sequence was cleared before executing because an out of erase sequence command was received
Manufacturer ID: 0x00 (Unknown) need to replace EMMC
@@ilyasrao I tried ok sd card...but still same...
Sir pendrive write protected hai kya ye bhi ufi se Ho jayega
Sir agar Ho jaye to iska bhi ek video Banana zarur
Sir ufs memory card reader ko ufi box me connect karne ka tarika bataye
sir mmc me write protected is methad se hatsakta he
Sir make a one video about laptop ssd can't format problems solution .
Nice sir
sir ips se kese krna h wo bhi bta den pinout kese lagani h
Sir main, punjab (india) se hoon, aapka chahiye tha, because I am beginners
bhai dead card b repair kr sakty hen kia ufi sy ager kr skty to treeka btaen plz
NO
bhai jaan basit bhai say li thi ufi
Good information
Thanks
thank u bro
You're welcome!
write protect memory card repair ??
Sir rmx1945 realme c2 isp pinout s unlock kar rha tha m dead hogya ext csd file read fail bta rha h ufi m help sir
Sir Sd Card ka password agar Remove karna ho without Data loss koi options h ufi me
No
@@ilyasrao Thanks
Hello my friend
Can you explain the reading of isp emcc?
Via UFI USB adapter
Yes
Thank you
You're welcome
Vaee jumper nahi jodna pade ga card reader added
How to Scandisk wire proteted pen drive 32Gb format ufi box
same as in this video
Sir can you do it also with easy jag plus?
yes we will upload a video on easy jtag
I can't format it from the computer?
Sir Qmobile i5i 2019 key Flash file nhe mil rahi koi solution hay
Bhai ji easy jtag par or video banao
Ok
Ufi box support to recovery erased memory card ?
No
bhai Audio is not added?
sir
Not working
Dead memory card repair?
If due to hardware i mean any scrath or broaken than you can not repaire
ATF box se 1 click mai hota hai 20sec only
aap ki bohot mehrbani lekin ha ufi ki training de rahe hen
Sir can we repair write protected card also
Atf server off
yaar apna wattsapp no do
Grup add me sir
join in facebook web.facebook.com/groups/537531790319894/