Anyone who follows his examples of how to use an angle grinder is asking to get hurt! Innate been using angle grinders for forty years in my trade as a welder and I NEVER run without a safety guard!!! Also the way he is cutting, the direction of rotation will push the grinder right into your body should the blade catch. And to prove he doesn't know what he's doing, when grinding steel you never let the sparks come at you. Always send the sparks away from you in a safe direction! Wear leather gloves, synthetic material and those cheapo gloves will not protect you against accidental contact with the abrasive. I have seen too many serious injuries and suffered a few minor ones myself. But I don't invite disaster. This should have removed!!!!!
I have a saw chain attachment for my angle grinder. I do not dare to operate it without a guard. Also, I actually stopped using the saw chain attachment because it scares me, but also the 80 grit flap wheel is very aggressive on wood, so much so that I actually use that to carve wood. Finer grit flap wheels can then be used to smooth them out, but I prefer air sander if I can as the 80 grit flap wheel has a huge tendency to gouge the work piece. Those flap wheels are more aggressive on wood than most want to admit.
Also some of the disc's he uses. The saw blade type gouging wheels are extremely dangerous. I work at an aluminum boat building company and we use gouging wheels on our grinders and air gougers. *Graphic warning* There was a new guy who took one when he wasn't supposed to, he got inside a small cubby and went to cut out a small tack. Who knows why a cutting disc wasn't good enough for him. He had glasses on but no welding hood or face shield. It kicked back and cut the side of his cheek open. You could see inside of his gums. If it went an inch lower, he would've cut his throat and bled out instantly right next to me. We had to soak up puddles of blood at the bottom of the boat and wipe meat with beard hair attached off the sides of the boat. It got flung everywhere. Absolutely disgusting. Makes me sick thinking of it to this day. If you don't act like an idiot, you'll be fine. I've used gouging wheels for 4 years now. Safety is key.
You forgot the part where the surgeon amputates what's left of your fingers. NEVER work with flimsy gloves or without a guard. As a general rule, "I need a dodgy adapter" is synonymous with "This blade isn't meant to be put on that tool".
That Chain Saw disk for wood is incredibly dangerous. Don't even think about using it. If it stuck in the wood, You will get powerful kickback and bye bye fingers.
I'd say any toothed wheel is dangerous on an angle grinder. They kick and you will at some stage be caught out. And it's not so much fingers. They tend to run up peoples faces, or across feet.
2:20 he's spraying away from himself, so the disc is like a wheel rolling towards his hand. When it grips the grinder fly's towards you. Always aim the sparks towards you just off to the side
I advise those who are friends with their heads and at least understand what the author of the video is doing to put a dislike and a complaint about dangerous actions
Several of these blades are way beyond dangerous and way outside of the intended purpose of a 4 inch “grinder”. I’ve been fabricating, building and repairing all sorts of things my whole life and have more tools than I can count, along with a few scars… I would never bring any of the large toothed stock removal blades shown here into my shop. I’m really surprised many of these blades exist at all with today’s lawyers eliminating most personal responsibility by blaming manufacturers for the stupidity of the end-user
@@altergreenhorn i had a close call with the chainsaw wheel on a bounce back kick. rule of thumb, keep your thumbs and fingers away. i could use it stationary with some sort of table keeping arms length away
That 3-tooth carbide blade took my uncle's pointing + middle finger. So clean was the cut, the surgeon could reconnect it. The only blades that should ever be used on a grinder is grinding-type, stuff that don't 'bite into' material.
I advise those who are friends with their heads and at least understand what the author of the video is doing to put a dislike and a complaint about dangerous actions
I worked in a machine shop we always ditched the guards. Surd you got a skin burn once and a wile but noting serious And it hurt like hell so you learned not to do it really fast. At home I might leave it on depends on what I'm doing. The flap disks are great for taking off rust or removing pain really fast, if your cutting tiles the guard gets in the way cutting a circle for a toilet.
2:05 защитный кожух есть 2:19 защитный кожух был Нравятся вам куски дисков и опилки в различных частях тела - дело ваше. Зачем других такому учить? 2:49 "COOL!" ? Да и одного раза не кул, а кол! Заготовки крепить надо надёжно.
I advise those who are friends with their heads and at least understand what the author of the video is doing to put a dislike and a complaint about dangerous actions
Уважаемый автор видео сообщаю вам, что защита на угловой шлифовальной машинке не для красоты. И при роботе с кругами различных типов и направлений она очень нужна, не игнорируйте технику безопасности.
I advise those who are friends with their heads and at least understand what the author of the video is doing to put a dislike and a complaint about dangerous actions
NOTE TO SELF: Whenever using a Grinding or Cutting Disc of ANY kind, ALWAYS have the included Guard firmly attached to the tool. The A.S.M.E. equates the explosive force of a 4.5" x 1/4" x 5/8-11 Type 27 Depressed Center Grinding Wheel spinning at 13,000 rpm to the blast of a 12ga Shotgun. I'm not Bulletproof... Are you..? How do I know these things...? 42 Years of selling Industrial Tools. Safety is YOUR responsibility....
Note to you tool sales man, I used these every day, the guards firmly attached to the trash can. Or scrap barrels. I've got all 10 toes and 10 fingers. And yes I got a few road rash hits over the years. I wont lie. But you'll only do it once.
@@whatfreedom7 what happened to me I was notching Aluminium holding the grinder with two hands. It had the guard on. The saw blade dug into the Aluminium but didn’t cut it, the velocity of the blade forced the grinder into my leg. What saved me that day was new unwashed heavy cotton trousers that wrapped up, taking the energy out of the spinning blade. It still cut me on the upper leg/groin.
@@covidisevent201 yes, these angle grinder tungsten saw blades are dangerous. The depth of cut is hard to control safely handheld. I’ve been a qualified Tradesman for 32 years in a number of industries.
I have an angle grinder in my shop. The only time it even comes off the shelf is when I need to cut something harder than aluminum and there is absolutely no other way to do it. I have often said there is a fine line between respect and fear. I respect all my tools but I fear this one.
I advise those who are friends with their heads and at least understand what the author of the video is doing to put a dislike and a complaint about dangerous actions
I advise those who are friends with their heads and at least understand what the author of the video is doing to put a dislike and a complaint about dangerous actions
I advise those who are friends with their heads and at least understand what the author of the video is doing to put a dislike and a complaint about dangerous actions
You missed how amazing a flapdisk is as a woodworking tool. Shortenening a door 5 mm? It's a 5 minute job to sand it down with a flapdisk. Very quick, yet gentle and easy to work with.
Beside the safety issues, just don't use diamond tools on steel or iron as it would wears them faster. I.E The carbon of the diamonds will dissolve in those metals.
These discs rotate at 80m/s which is ~290km/h (~180mph) and only thinking of getting hit by a part of it when it snaps makes for a very gory scenario. Put the fuckin' guard on. Also I once cleaned a rusted construction with the wire brush mounted on a 1300W (but not bigger than regular 700-800W) clutchless Hitachi flex and it bounced into my chest. It grabbed me by the clothes. Thankfully it was winter and I had many clothes on me. Yet it torn through my winter jacket, two shirts and only the last of it, which was my T-shirt was kept intact. More to say... The grinder still was engaded, twisted in my clothes and I held it quite firmy for a 2 or 3 seconds. I was so shocked I didn't realise what happened and it took me these 3 seconds to actually realise to turn it off, because it wrapped me so tight I couldn't breathe. Like someone sitting on Your chest. Knowing this, for wire brushing and grab-friendly applications I only use 800W grinder with clutch. Also I heard a story, when someone was a cutting a thin wire mesh and the flex grabbed it, torn some of the wires and made itself a huge spinning wire brush... It just minced the operator's skin and flesh on his hand. Thankfully wires weren't long enoug to reach his face. Stay safe everyone.
I advise those who are friends with their heads and at least understand what the author of the video is doing to put a dislike and a complaint about dangerous actions
Amazing, here I was using copper chisels and pounding stones! This is gonna make my work much, much, faster! Wait till you see what I build, you'll never believe me...
There are some real beasts here! They're certainly not items for those of little or average experience. However, only in the right hands, there are some very useful tools here.
СтАпЭ !!! Ахтунг!!! Не делайте так. всегда ставьте защиту на ушм! Всегда! На производстве случаев полным полно. Техника безопасности написана кровью. Что за изощреные методы самоубийства.
I advise those who are friends with their heads and at least understand what the author of the video is doing to put a dislike and a complaint about dangerous actions
I advise those who are friends with their heads and at least understand what the author of the video is doing to put a dislike and a complaint about dangerous actions
Wow, dude, I realize you were just demonstrating these different cutting attachments but to do it with the blade guard removed is beyond irresponsible. You may inadvertently give some inexperienced user the idea that its okay to remove the guard. Putting their life at risk.
@@gary7708 "Sometimes the guard must literally be removed to use the tool in order to use it correctly" If you honestly think that then you should be no where near a grinder or any power tool for that matter.. I work as a welder/engineer and in my years of work i HAVE never needed to take the guard of something to use it "correctly" or used a stupid attachment that should never of been fitted to a angle grinder in the first place.. If the angle grinder is not big enough for what you need to do then you use a larger one or a different tool like a die grinder or something or a barrel grinder.. The guards are there for a reason
@@gary7708 Safety guard is integral part of using the grinder safely, if you can't use it "correctly" without the guard to do what you intend to you are using wrong tool.
A couple of years ago i made my own bigger Safety-Guard and used a regular (i think it's a 160 mm) circular saw-blade on a one-handed grinder. It cuts and grinds wood like it was butter....
все что показал автор я бы 3 дисками сделал. Шлифовальным , токарным и отрезным.Но дерево бы не резал ни когда тем диском на котором цепь из бензопилы, да еще и без защиты .
wow so awesome to see it and so satisfying i can imagine that person feelings while those blades doing their job of cutting in the most beautiful way. thank you so much for the video i really enjoyed it.
Anyone who follows his examples of how to use an angle grinder is asking to get hurt! Innate been using angle grinders for forty years in my trade as a welder and I NEVER run without a safety guard!!! Also the way he is cutting, the direction of rotation will push the grinder right into your body should the blade catch. And to prove he doesn't know what he's doing, when grinding steel you never let the sparks come at you. Always send the sparks away from you in a safe direction! Wear leather gloves, synthetic material and those cheapo gloves will not protect you against accidental contact with the abrasive. I have seen too many serious injuries and suffered a few minor ones myself. But I don't invite disaster. This should have removed!!!!!
As a retired toolmaker from down under in Australia I totally agree I cringe every time I see a angle used without the guard . That chain saw ?????
Title should read, 13 ways to go on permanent disability......
I have a saw chain attachment for my angle grinder. I do not dare to operate it without a guard. Also, I actually stopped using the saw chain attachment because it scares me, but also the 80 grit flap wheel is very aggressive on wood, so much so that I actually use that to carve wood. Finer grit flap wheels can then be used to smooth them out, but I prefer air sander if I can as the 80 grit flap wheel has a huge tendency to gouge the work piece. Those flap wheels are more aggressive on wood than most want to admit.
Hey bro You’re quite right. There’s crazy Chinees or Russian. I’m not so crazy however I’m Russian :) Safety first (c)
This is one of the worst videos of that kind that I have seen. Just stupid.
13 amazing ways you can learn anatomy really quick
Referring to the lack of disc gaurd? I was baffled at the opening showing safety equipment but then no gaurd.
No guard and no handle. You are just asking for it. But hey at least he hold it rigth, for an amateur.
Also some of the disc's he uses. The saw blade type gouging wheels are extremely dangerous. I work at an aluminum boat building company and we use gouging wheels on our grinders and air gougers. *Graphic warning* There was a new guy who took one when he wasn't supposed to, he got inside a small cubby and went to cut out a small tack. Who knows why a cutting disc wasn't good enough for him. He had glasses on but no welding hood or face shield. It kicked back and cut the side of his cheek open. You could see inside of his gums. If it went an inch lower, he would've cut his throat and bled out instantly right next to me.
We had to soak up puddles of blood at the bottom of the boat and wipe meat with beard hair attached off the sides of the boat. It got flung everywhere. Absolutely disgusting. Makes me sick thinking of it to this day. If you don't act like an idiot, you'll be fine. I've used gouging wheels for 4 years now. Safety is key.
You forgot the part where the surgeon amputates what's left of your fingers. NEVER work with flimsy gloves or without a guard. As a general rule, "I need a dodgy adapter" is synonymous with "This blade isn't meant to be put on that tool".
Yep sums it up
Слава Великой Украине
I would gladly amputate my ears so I wouldn’t have to listen to this music.
I am glad to see all the replies on how unsafe these demonstrations were.
You probably read instructions too
@@kellypitts8481 rather be safe than sorry
the legend is back
I think that he will be more legendary if he makes kitchen gadgets test
That Chain Saw disk for wood is incredibly dangerous. Don't even think about using it. If it stuck in the wood, You will get powerful kickback and bye bye fingers.
I'd say any toothed wheel is dangerous on an angle grinder. They kick and you will at some stage be caught out. And it's not so much fingers. They tend to run up peoples faces, or across feet.
@@ibast1 Look at this video: "How to shred 4 fingers with a woodworking power carving disc"
Degloving is my new favourite word.
Слава Великой Украине
I believe the sale of such a device is actually illegal in some countries.
2:20 he's spraying away from himself, so the disc is like a wheel rolling towards his hand. When it grips the grinder fly's towards you.
Always aim the sparks towards you just off to the side
7:01 Apply the polishing paste to the pad, not to the workpiece. This way much less will get flung off.
Обзор то хороший но мне одному кажется что диски по дереву с сильно выступающими быстрорежущими кромками можно по рогам словить...?
I advise those who are friends with their heads and at least understand what the author of the video is doing to put a dislike and a complaint about dangerous actions
@@ИванЗубов-х7э Согласен, защиту на болгарку не кто не отменял...
The second you used a chainsaw disk without a guard I ended this video.
Even with the guard..
Also gloves with rotary tools
Ridiculously dangerous using these adaptations without a guard.
Several of these blades are way beyond dangerous and way outside of the intended purpose of a 4 inch “grinder”.
I’ve been fabricating, building and repairing all sorts of things my whole life and have more tools than I can count, along with a few scars… I would never bring any of the large toothed stock removal blades shown here into my shop.
I’m really surprised many of these blades exist at all with today’s lawyers eliminating most personal responsibility by blaming manufacturers for the stupidity of the end-user
Agreed some of attachments are really scary and I'm working with the angle grinders for more than 30 years. Some of them would never be used by me.
@@altergreenhorn i had a close call with the chainsaw wheel on a bounce back kick. rule of thumb, keep your thumbs and fingers away. i could use it stationary with some sort of table keeping arms length away
That 3-tooth carbide blade took my uncle's pointing + middle finger. So clean was the cut, the surgeon could reconnect it.
The only blades that should ever be used on a grinder is grinding-type, stuff that don't 'bite into' material.
Use the guard! OMG
I advise those who are friends with their heads and at least understand what the author of the video is doing to put a dislike and a complaint about dangerous actions
Seems like a great way to loose a finger. Just think if that blue one hits anything on your body.
I worked in a machine shop we always ditched the guards. Surd you got a skin burn once and a wile but noting serious
And it hurt like hell so you learned not to do it really fast. At home I might leave it on depends on what I'm doing.
The flap disks are great for taking off rust or removing pain really fast, if your cutting tiles the guard gets in the way cutting a circle for a toilet.
@Damon Guinn
Maches shop tool, body repair man tool.
Ex.. painters tool.
2:05 защитный кожух есть
2:19 защитный кожух был
Нравятся вам куски дисков и опилки в различных частях тела - дело ваше. Зачем других такому учить?
2:49 "COOL!" ? Да и одного раза не кул, а кол! Заготовки крепить надо надёжно.
I advise those who are friends with their heads and at least understand what the author of the video is doing to put a dislike and a complaint about dangerous actions
и крепёж на 3:05 вызывает сжатие сфинктеров :-)
How to not cut stuff with an angle grinder 101
Уважаемый автор видео сообщаю вам, что защита на угловой шлифовальной машинке не для красоты. И при роботе с кругами различных типов и направлений она очень нужна, не игнорируйте технику безопасности.
Обсолютно солидарен!!!
I advise those who are friends with their heads and at least understand what the author of the video is doing to put a dislike and a complaint about dangerous actions
Есть дополнение, диск должен крутить не от себя, а на себя, при закусывании болгарку дернет в перед и это может предотвратить возможные травмы...
As a tree surgeon using the chainsaw disc is about the most dangerous thing I have seen, bl--y crazy
yep. narrow hand spacing, and not chain brake. What could possibly go wrong ?!!
Wouw showing discs that have been used for decades to do the job right noway ...I am so in awe now 🤔
Köszönöm az összefoglaló videót.Igazán szuper tárcsákat vonultat fel.
NOTE TO SELF: Whenever using a Grinding or Cutting Disc of ANY kind, ALWAYS have the included Guard firmly attached to the tool. The A.S.M.E. equates the explosive force of a 4.5" x 1/4" x 5/8-11 Type 27 Depressed Center Grinding Wheel spinning at 13,000 rpm to the blast of a 12ga Shotgun. I'm not Bulletproof... Are you..? How do I know these things...? 42 Years of selling Industrial Tools. Safety is YOUR responsibility....
Note to you tool sales man, I used these every day, the guards firmly attached to the trash can. Or scrap barrels.
I've got all 10 toes and 10 fingers.
And yes I got a few road rash hits over the years. I wont lie. But you'll only do it once.
I totally agree
It's the most unsafe video I've ever seen.
Working is unsafe but my boss still makes me do it anyway.
@Eric Sundquist 😆😆😆
Degloving is my new favourite word
I nearly severed my femoral artery using a saw blade on a 4 inch grinder. Don’t use them. When they bite, you can’t hold the grinder.
Imagine that blue one with the big notches catching your finger. You won’t have a finger.
@@whatfreedom7 what happened to me I was notching Aluminium holding the grinder with two hands. It had the guard on. The saw blade dug into the Aluminium but didn’t cut it, the velocity of the blade forced the grinder into my leg. What saved me that day was new unwashed heavy cotton trousers that wrapped up, taking the energy out of the spinning blade. It still cut me on the upper leg/groin.
@@tonydoggett7627 ouch that sounds like a nasty wound.
Why? Are you actually serious?
@@covidisevent201 yes, these angle grinder tungsten saw blades are dangerous. The depth of cut is hard to control safely handheld. I’ve been a qualified Tradesman for 32 years in a number of industries.
I have an angle grinder in my shop. The only time it even comes off the shelf is when I need to cut something harder than aluminum and there is absolutely no other way to do it. I have often said there is a fine line between respect and fear. I respect all my tools but I fear this one.
So just a heads up the concrete surfacing disc should be used with a dust extraction shroud. Concrete and ceramic powders are extremely harmful.
The guard is made for 115 mm disc and he’s using some 125s without a guard...
But he is using gloves 😀!
Слава Великой Украине
Señor chapuza la protección no se quita nunca
Always Best.... 🇮🇳
6.18-значит втулку они в комплект положили,а запасные руки где,я не понял?
Тут тебе понадобиться уже доп.жизнь)))
Лишняя запчасть🤣🤣🤣
I advise those who are friends with their heads and at least understand what the author of the video is doing to put a dislike and a complaint about dangerous actions
Видео о том как остаться без некоторых конечностей или органов
I advise those who are friends with their heads and at least understand what the author of the video is doing to put a dislike and a complaint about dangerous actions
и болгарки
ВИДЕО О КРУГАХ, А О "ТБ" КАЖДЫЙ ДОЛЖЕН ЗАБОТИТЬСЯ САМ
Ну как без защиты-то!? Круги хорошие, но меры безопасности бы подтянуть...
это пока петух не клюнет, я тоже когда то без защиты работат, пока рука не сползла, палец до кости подпилил, больше не снимал !
Да ладно, ему только видео отснять, чтоб покрасивее было
I advise those who are friends with their heads and at least understand what the author of the video is doing to put a dislike and a complaint about dangerous actions
You missed how amazing a flapdisk is as a woodworking tool. Shortenening a door 5 mm? It's a 5 minute job to sand it down with a flapdisk. Very quick, yet gentle and easy to work with.
These discs will leave you speechless…when you loose one of your body parts.
Beside the safety issues, just don't use diamond tools on steel or iron as it would wears them faster. I.E The carbon of the diamonds will dissolve in those metals.
These discs rotate at 80m/s which is ~290km/h (~180mph) and only thinking of getting hit by a part of it when it snaps makes for a very gory scenario. Put the fuckin' guard on. Also I once cleaned a rusted construction with the wire brush mounted on a 1300W (but not bigger than regular 700-800W) clutchless Hitachi flex and it bounced into my chest. It grabbed me by the clothes. Thankfully it was winter and I had many clothes on me. Yet it torn through my winter jacket, two shirts and only the last of it, which was my T-shirt was kept intact. More to say... The grinder still was engaded, twisted in my clothes and I held it quite firmy for a 2 or 3 seconds. I was so shocked I didn't realise what happened and it took me these 3 seconds to actually realise to turn it off, because it wrapped me so tight I couldn't breathe. Like someone sitting on Your chest. Knowing this, for wire brushing and grab-friendly applications I only use 800W grinder with clutch. Also I heard a story, when someone was a cutting a thin wire mesh and the flex grabbed it, torn some of the wires and made itself a huge spinning wire brush... It just minced the operator's skin and flesh on his hand. Thankfully wires weren't long enoug to reach his face. Stay safe everyone.
The use of a cup stone grinder was banned in NZ some 10 years ago and this demonstration shows why.
I was just waiting for this to turn into a video nasty! Blood and fingers everywhere? Safety guards do get in the way though 😂
Those extension mounts will result in heavy wear on the spindle bearings.
im crush on u your clip gajeds experiments all is cool DUDE
yyyeeeAAAAHHHHH
О чем это видео? О том, как гуманитарий знакомится с инструментами обработки материалов. Как первоклассник, прямо.
I advise those who are friends with their heads and at least understand what the author of the video is doing to put a dislike and a complaint about dangerous actions
Залипалка для незнакомых с болгаркой, судя по просмотрам
Целых две минуты потратил и выключил эту фигню.
Диски по дереву очень опасные. Я одним из таких ногу себе сильно поранил. Теперь их обхожу стороной.
@@Stroitel_kommynizma Щетка еще опаснее - я чуть в церковный хор петь не пошёл.
7:10 using the guard with the less dangerous attachment… 🤦🏼♂️
I'm dying here, because this guy is so ridiculous in handling tools. And calls himself Mr. Hacker. Hack off his fingers
Its also the only time he is aiming the debri spray towards himself (so if the grinder grabs it fly's away from you not towards)
3:20 here too, guard, less dangerous, correct spray direction
Brilliant video thank you
Love from india bro 😎
Wow awesome job 😎👍
Amazing, here I was using copper chisels and pounding stones! This is gonna make my work much, much, faster! Wait till you see what I build, you'll never believe me...
Well done
Darwin award material
You are legend dude
There are some real beasts here! They're certainly not items for those of little or average experience. However, only in the right hands, there are some very useful tools here.
Техника безопасности? - Не, не слышал!
amazing, good metod
СтАпЭ !!! Ахтунг!!! Не делайте так. всегда ставьте защиту на ушм! Всегда! На производстве случаев полным полно. Техника безопасности написана кровью. Что за изощреные методы самоубийства.
I advise those who are friends with their heads and at least understand what the author of the video is doing to put a dislike and a complaint about dangerous actions
Put the rouge paste on the disc.
That stuff probably flew off onto the wall first contact.
😂😂
Stumpy Nubs says the Wood carving chainsaw discs should be banned...what's your opinion?
Great video 👏
Wow amazing,
Perfect 👍
Thank you so much for your lovely support 😍 thank you so much for 47 😊😇🙂🙃 50 karva do plzZzz 🙏🙏🙏🙏🙏🙏🙏..
I advise those who are friends with their heads and at least understand what the author of the video is doing to put a dislike and a complaint about dangerous actions
Diamond pads for polishing Granite you only need 50,100,200,400,800,1500,3000 that's all we use at work and its perfect
5:20 is extremely dangerous, i almost cut my arm off, while I was using it without a guard, that disc is not made for angled grinders, STAY SAFE.
Good job
Like
Informative
ကောင်းတယ်နော်
Wow, dude, I realize you were just demonstrating these different cutting attachments but to do it with the blade guard removed is beyond irresponsible. You may inadvertently give some inexperienced user the idea that its okay to remove the guard. Putting their life at risk.
Guard?! What guard?!
That’s the first thing you throw away.
Yeah. I thought the same thing.
@@gary7708 "Sometimes the guard must literally be removed to use the tool in order to use it correctly" If you honestly think that then you should be no where near a grinder or any power tool for that matter.. I work as a welder/engineer and in my years of work i HAVE never needed to take the guard of something to use it "correctly" or used a stupid attachment that should never of been fitted to a angle grinder in the first place.. If the angle grinder is not big enough for what you need to do then you use a larger one or a different tool like a die grinder or something or a barrel grinder.. The guards are there for a reason
@@gary7708 Safety guard is integral part of using the grinder safely, if you can't use it "correctly" without the guard to do what you intend to you are using wrong tool.
A couple of years ago i made my own bigger Safety-Guard and used a regular (i think it's a 160 mm) circular saw-blade on a one-handed grinder. It cuts and grinds wood like it was butter....
From someone into lapidary, that diamond blade will be much more useful and work for far longer if water is used
Your information is good and useful
все что показал автор я бы 3 дисками сделал. Шлифовальным , токарным и отрезным.Но дерево бы не резал ни когда тем диском на котором цепь из бензопилы, да еще и без защиты .
Да и с защитой я б не рискнул
Video géniale
Merci 👏
Are you legend?
Testing it on the softest wood pine, of course its gonna work well
Nas mãos de um profissional , dá pra fazer muita coisa útil .
Any one from india ❤️❤️
👍💖
The legent 😎
awesome
If grinding concrete always wear a full sealed mask. Concrete dust can cause silicosis and then death.
Very nice 👍👍
噴片的日子不遠了，哈哈哈
اللهم صلِّ وسلم وبارك على سيدنا ونبينا وحبيبنا وشفيعنا محمد صلى الله عليه وسلم
Beautiful idea and cool idea
Nice blades, I also admire your lack of care while operating an Emergency Room Scheduler machine...
The chain saw one was my favorite
and probably one of most dangerous
@@karwolxd agree
Very useful and amazing way of claiming your life insurance.
Nice video man
технику безопасности при работе с режущим инструментом знаю как свои восемь пальцев
У меня все эти "новинки" уж много лет как в ящике с УШМ лежат.
This guy is awsome
wow so awesome to see it and so satisfying i can imagine that person feelings while those blades doing their job of cutting in the most beautiful way. thank you so much for the video i really enjoyed it.
It’s new for me))
Nice lagunda
super👍👍👍
No guard on that?
You’re brave.
I need that red all purpose diamond cutting wheel!
bosch carbide multi wheel very handy as well
Grinders scare me even when unplugged and stored in a case on a shelf that's out of my reach.
Nice
I severed an artery just watching this guy cut everything backwards and without a guard
😂😂
Awesome
Those wood cutting discs are more dangerous than a shootout in an elevator.
Thanks to the proliferation of cordless power tools like the angle grinder, ALL bicycle locks are obsolete! Store your bicycle indoors.
Yep, it's the universal master key ! Works well on all doors, buildings, etc where noise isn't going to alert anyone.
Awesome...