it's a shame too when you realize probably no one is going to go through the effort to build a new rotor because A. metal = expensive and B. BIG rotor size
@@wigwagstudios2474unless they could find one from a parts P-50 but the only parts P-50 I know of is the former state fair park siren with the fried motor in ASC's yard. Even then, that would be super hard to do so cause you would essentially have to buy that siren from ASC. Assuming they are willing to sell it for parts.
@wingochan9400 Before the sirens rotator failed and later the siren sucked some fiberglass from the horn and blew up the chopper and stator got cracked and destroyed it will need a new stator and chopper and rotator
That's a rough way to go :( At least now I know what sound is left after a siren suddenly cuts out, and with one of the beefiest electric ones at that! So who wants a repair and restoration project now? Gonna need $$$ that's certain!
Stopping a 80 pound at least chopper spinning at 3450 RPM in a blink of an eye? That's more impressive then Sawstop! I present to you all, Sirenstop! Patent pending.
@@rainbowrailroadcrossing7798 eh prb won’t be enough to knock you out, as for example, that’s about the noise level aircraft maintenance personnel are exposed to when they’re literally sitting under a fighter jet as they test the engine on the ground at full afterburner, and I mean, they handle it well (with hearing protection ofc) although it is prb a bit less as 185dB is like being 500-1000 feet away from a rocket taking off
Probably not. Because your gonna need a freaking big 3D printer to print something that size. For one. And two, the plastic or whatever the printing material is called would likely shatter and self destruct from running at that speed.
i dont think a 2 feet IN DIAMETER piece of plastic is gonna survive being spun around 60 TIMES PER SECOND in a slightly bigger piece of metal in a 1000+ pounds big-ass metal bucket
@@Airplane432this p50 took quite a beating in a storm 10 years ago, and around 2 months before sirencon 2024, a piece of the broken projector got sucked into the chopper and cracked it, that's why the siren was taken off the pole and replaced, and when sirencon 2024 kicked off, the chopper finally fractured from the high rpm, the gradual bump start, and fatigue. The chopper then friction welded itself to the stator, frying the motor in the process. The reason for the bump start was because they were worried that the high load from the chopper motor on the generator would cause it to fail prematurely, they took the same precaution the previous year with ASC's stored cyclone 125, which uses the same motor and chopper as the p50
I think the Problem Here was that the Chopper welded it self to the rotor Because of heat (Friction) I never heared a P-50 Go high like that so Maybe the Overvoltage you put on it Caused the Chopper To spin as Fast that it Welded it self Thus Locking the Chopper Because a Normal Penetrator 50 Uses a Brush Type While T-135 Type P-50 Uses Some else.
In TSM p-50 was crapping in allertor and calling him a big toilet and also, calling modulator mentos when he got in jail with him so that's how p-50 deserves it for bullying other sirens
@@polygoned_cheese me neither! One video shows a guy with an STH-10 and he pushes a stick into the chopper while it's spinning very slowly and it chopped the stick. They don't call em choppers for nothing!
@@polygoned_cheese Actually, P-50's are 50 horsepower. The horsepower your bikes engine is equivalent to a P-15 which is a 15HP siren. The penetrator sirens are modeled by their motors horsepower. I.e. P-10= 10HP P-50= 50HP etc.
I think this possible to replace by going to a tornado siren junkyard and find a p50 and get that chopper and put it on the this siren that cracked making a replacement
135 Db's at a 100 feet. That's 100 feet! Now imagine you right next to the thing without hearing protection. I can imagine anything above 250 to 300 Db's! This thing could actually kill you if you were up close without hearing protection.
i love how the mic just goes from earrape to mere echo and then people screaming "OH FUCK!" in under a second
You mean they were saying “AWW FAAWWWK”
I love the initial realization at the end that this is never sounding again
it's a shame too when you realize probably no one is going to go through the effort to build a new rotor because A. metal = expensive and B. BIG rotor size
@@wigwagstudios2474unless they could find one from a parts P-50 but the only parts P-50 I know of is the former state fair park siren with the fried motor in ASC's yard. Even then, that would be super hard to do so cause you would essentially have to buy that siren from ASC. Assuming they are willing to sell it for parts.
@@wigwagstudios2474You cant just replace it for a new one. The entire thing is done for.
That is mostly what I already said, but yeah... Minus one functioning P-50.
I have never seen a P-50 do that before. 😧
But damn, that siren can scream! Good thing you all were wearing hearing protection. 🎧
@wingochan9400 Before the sirens rotator failed and later the siren sucked some fiberglass from the horn and blew up the chopper and stator got cracked and destroyed it will need a new stator and chopper and rotator
Oh so that's why it sound low
@@ILoveViaLRC no it’s sucked the fiber glass later In the video but it looks like it has done it before so I’m guessing
@fs_sd-10 i know
phill swift here now! that's ! a lot of damage!
Welp there goes my towns P-50
So sorry man
4:01
P50: ima bust (explode)
Worker: Dont you dare-
P50: *explodes*
Worker: Shit
Those echoes when it stopped short is a good reminer of how loud P-50s actually are.
That's a rough way to go :( At least now I know what sound is left after a siren suddenly cuts out, and with one of the beefiest electric ones at that!
So who wants a repair and restoration project now? Gonna need $$$ that's certain!
Generator to siren: "You're chopped liver!"
Siren to generator: "You're blowing smoke!"
bro that thing got the worlds fastest chopper brake
Stopping a 80 pound at least chopper spinning at 3450 RPM in a blink of an eye? That's more impressive then Sawstop! I present to you all, Sirenstop! Patent pending.
Pretty sure everyone knows now but the chopper cracked in half
@@therailcat9790 i know
@@therailcat9790 insane that's even possible, especially considering how huge a P50 chopper is.
@@zachzebra56 It is because the chopper physically snapped in half
i have to imagine thats pretty fckin scary to see a thing weighing probably over 1000 pounds suddenly jolt like that
It was quite scary.
an asc t-128 is 1320 lbs. and the aca p50 is 2 times bigger so probably 2000+ lbs.
Yo that P50 said I’m bouta blow 4:01
Your wrong its :4200
@@MaisenVo030who ASKED??
I wonder what's inside it why it's making such a loud noise
Amazing how the mic managed to survive a whopping 250+ decibels but the siren didn't. RIP.
The camera was receiving roughly 160 dBs of sound, i’ll be editing the description in a minute or two with details on what caused the failure.
@@SirenDude1003 still amazing.
@@SirenDude1003Nah prb more than that, as that was how loud Frankie’s P-10 was up close. That was around prb 175-185dB
@@SirensAndAlarmsOfNorthernIL185db is still an insane level that can knock anyone out.
@@rainbowrailroadcrossing7798 eh prb won’t be enough to knock you out, as for example, that’s about the noise level aircraft maintenance personnel are exposed to when they’re literally sitting under a fighter jet as they test the engine on the ground at full afterburner, and I mean, they handle it well (with hearing protection ofc) although it is prb a bit less as 185dB is like being 500-1000 feet away from a rocket taking off
I know this might be a stupid question, but is there a way to 3D print a new chopper?
No… this thing is done for 3D printing won’t do anything especially since it’s metal and big
Probably not. Because your gonna need a freaking big 3D printer to print something that size. For one. And two, the plastic or whatever the printing material is called would likely shatter and self destruct from running at that speed.
@@zachzebra56 I think 3D printers can also produce things made of metal too.
@@bentheidioticnerd8993 Really? Never heard of that before.
i dont think a 2 feet IN DIAMETER piece of plastic is gonna survive being spun around 60 TIMES PER SECOND in a slightly bigger piece of metal in a 1000+ pounds big-ass metal bucket
I'm genuinely curious after 5-6 months how did they not notice the pops when the chopper was tested?
Im curious to see what actually happened, and what it looked like when it went.
So the motor literally has enough instantaneous torque to break the chopper?
4:01 the siren's chopper broke
It cracked
well, Panasonic survived but that siren of P-50 is dead and done. They are gone, mate.
The thing really wasn't having it today was it...
from the troble to the broken rotater to the chopper killing the siren
Salute to the P50, you were a real one.
Sadly the rotator motor’s gone
Why did the p-50 have weird holes?
because it was very old
@@Airplane432this p50 took quite a beating in a storm 10 years ago, and around 2 months before sirencon 2024, a piece of the broken projector got sucked into the chopper and cracked it, that's why the siren was taken off the pole and replaced, and when sirencon 2024 kicked off, the chopper finally fractured from the high rpm, the gradual bump start, and fatigue. The chopper then friction welded itself to the stator, frying the motor in the process. The reason for the bump start was because they were worried that the high load from the chopper motor on the generator would cause it to fail prematurely, they took the same precaution the previous year with ASC's stored cyclone 125, which uses the same motor and chopper as the p50
I think the Problem Here was that the Chopper welded it self to the rotor Because of heat (Friction) I never heared a P-50 Go high like that so Maybe the Overvoltage you put on it Caused the Chopper To spin as Fast that it Welded it self Thus Locking the Chopper Because a Normal Penetrator 50 Uses a Brush Type While T-135 Type P-50 Uses Some else.
Not the Case Did you Read the Description?
RIP P-50 & siren.
In TSM p-50 was crapping in allertor and calling him a big toilet and also, calling modulator mentos when he got in jail with him so that's how p-50 deserves it for bullying other sirens
This is just a rotational cyclone siren
It broke at sirencon 2024
Damn that bucket has a nice Cyclone 125!
Actually, it's the chopper of a cyclone 120 running on a 125 motor. You were close though.
@@zachzebra56 wouldn't put my finger in the port hole chopper whilst it's spinning
@@polygoned_cheese me neither! One video shows a guy with an STH-10 and he pushes a stick into the chopper while it's spinning very slowly and it chopped the stick. They don't call em choppers for nothing!
@@zachzebra56 same horsepower as my motorcycle cuz it's 15 hp motor too btw
@@polygoned_cheese Actually, P-50's are 50 horsepower. The horsepower your bikes engine is equivalent to a P-15 which is a 15HP siren. The penetrator sirens are modeled by their motors horsepower. I.e. P-10= 10HP P-50= 50HP etc.
h
What happened to the p-50
Why is the siren spinning opposite direction
I'm honestly surprised the GENERATOR didn't explode first!!
To be fair, it didn't look particularly healthy to begin with. Still nuts that 2 foot chopper can somehow snap itself in half.
0:16 sounds like a beat
yeah
did P-50 Siren got fixed yet?
@@metra1383 its not getting fixed
@@SirenDude1003 That’s just so sad 😞
It ate its self that is what killed it
Then the fiber glass loged itself into the motor seasing it and killing the motor
@@TOXICTHEPROTOGENWX that wasnt what caused it this time. The chopper cracked and split in half during operation.
I know theres the problem why P-50 siren stops wailing because theres the crack
it sucks that i missed the p-50 but i had to leave
That siren is already in rough shape what happened to it?
It was very old i think
@@MartinGamer6241 ik but like how did it get all that damage
Did the chopper blow up?
no but it cracked
@@minnesotaoutdoorwarningsirens wow. I guess you can say he no longer speaks.
ERRRRRCHA
from what i heard fiberglass was sucked into the chopper! ouch!!
EDIT: A crack in the stator apparently caused it.
the first few sounds sound like downshifting but backwards
That was so cool until it broke 😂
Me neither, i’ve also never seen a p50 sputter
0:52 epic gamer villain charging up their super cool attack that will (may or may not) destory half ot the solar system
whose P50 was it?
Oh my god 😯
What broke???
YEAH
the fan
What’s going to happen to this P-50?
Prolly gonna be melted down and made into a T-128.
@@benjaminbrown3939 It can't be fixed?
@@benjaminbrown3939 T-135ACDC*
@@Alwaysdoinit112 unfortunately it's toast
I think this possible to replace by going to a tornado siren junkyard and find a p50 and get that chopper and put it on the this siren that cracked making a replacement
R.I.P headphone user
This siren p-50 4:00
Pee-50 is crying:
pee bucket
Dalamnya ada dinamo yang besar jadi bisa motor itu yang untuk suara
What happened to the siren?
Blew up
How did this happen?!?!?! 💀💀💀
This is your fault P-50, and the rotor was seen in videos (strangely not this one) to be smoking the whole time it was running before death
@@AschTheWolf Are you accusing me? 😠
@acap5084 for all that is good and holy don't start roleplaying
It was an accident. Nobody did it intentionally.
@@thespiritstingray9359 Exactly! Thank you! I wasn't in the mood to get accused.
@chocosterling6225 And? Dude didn't go out of his way to render a siren permanently inoperable!
Loud bucket dead, Panasonic won.
3:29 bro kinda made a fire beat. Just crazy how the rotor went from almost full speed to stop dead in its tracks
My dam ears are bleeding
LOL imagine actually owning an P-50
🧢
@@dandidoo1393 but then again if it was borrowed from ACA Sirencon would've have been sued by now with an article
@@VonnaWasser ACA went bankrupt in 1992 and subsequently reformed as American Signal Corporation.
This P50 was taken down and the people at siren con decided to use this P50
SIREN IS BAD AND MAD ATTACK THAT HARD
RIP 🪦 4:01
me before i see a monster at the nigthmare:
Under pitch, kind of dying
*8/12 port siren death intensifies*
Quite the experience if i do say so myself
4:01 P-50 siren said bye bye
Rhe p50s chopper got fried also it was old how ik i was there even though im a 8 year old
3:27 starts attack
rip p-50
Rip noisy bucket ):
4:02 🫡
The the chopper explode😮
Go home siren, you are broken 😢
WHAT DO YOU MEAN
Rip to that microphone
135 Db's at a 100 feet. That's 100 feet! Now imagine you right next to the thing without hearing protection. I can imagine anything above 250 to 300 Db's! This thing could actually kill you if you were up close without hearing protection.
THAT WAS SO LOUD
180+ db
@@BrentmaphonLRX-13 135
Sounds like my lawnmower 🤣
So loud😢
What the sigma us broken
Baofeng radio spotted 😎
Brooooooooooo nooooo😢
The P-50 will be explode
Wow
4:00
The Aphmau Is hell and running too fasterIs a Speed 😻😽
EXTREMELY HELL
EXTREMELY HELL
TOO FAST
YOU SPEED
EASY
4:01 p50 Explodes
P-50 fiasco 2.0
We'll be explode
MY EARS 1:08
Rip siern
rip p50
This sounds absolute garbage
Acá p-50👌👌🫡🫡
Tester siren tornado 👍
0:55 ITS P-50 TIME MOTHER F@CKR!!!
*_b a s s_*
Nyig nyiing nyiiing nyiiiiiiiiiinggg!!! 😂😂
Xvvx ❤❤❤😊😊😊😊
0:18 siuuuuuuuuuuu
AAAAÆÅÄÃÂÆ 1:06
4:02
rip p-50
Nyig nyiing nyiiing nyiiiiiiiiiinggg!!! 😂😂