Keep in mind, the washer pump he found with the leak is only for the headlamp washers. The windshield washer pump is forward of the other one. Another source of leaks are the connections at the headlamp washers. Volvo uses stiff corrugated plastic hoses which crack on the ends.
I’m going to order the part and keep it ready, next time my washer fluid is empty I’ll do it. I don’t have the issue on my 2012 S80 yet but that is very good to know ! Thanks to you and Evgeny!
Thank you so much for your videos. I just got a 2009 XC 70 T6 and thanks to your videos. I have already been able to change my blower fan by myself and I’m going to do the rear liftgate struts. Your videos are very inspiring and have saved me a lot of money. Thank you so much, I look forward to all your future posts about these awesome Volvos and I will follow along with mine! Maybe one day I will send you a video to share.
Тоже текла омывающая жидкость, уже собирался туда лезть, но проблема решилась сама собой, когда я стал покупать другую омывающую жидкость. ) В любом случае, спасибо за полезную информацию. Особенно ценно, что вы публикуете коды запчастей-аналогов. Благодарю!
I have an 09 V70 too. I once looked at it but in my case it seems to leak only if I fill it all the way up to the "neck". I might take another look at it sometime soon.
2 weeks ago I bought an S80 T6 2012. And first day I noticed that when I fill my washer tank to the top it was leaking. Exactly same problem that you show on this video. So thank you very much gentlemen. I am going to bmw part store tomorrow and fix my issue :) Have nice days with your Volvos.
If it does not leak all the way out till empty then it could be the seal ring between the neck and the reservoir connection. This is actually my problem right now.
@@volvosweden Would you make a video for this? I think it might be my issue. I just replaced what you showed in this video but like you are saying, my wiper fluid leak leaves the tank 1/3 full. The issue is this seal ring between the neck and reservoir? Thanks!
I have a problem with my washers leaking but it is from the right side of the car. I think it could be from the headlight washer, but i will replace this elbow at the same time. Thanks for your excellent videos.
Thanks for this video. I have a 2008 Volvo C70 with the same leak. Removing the fender insert is the key to accessing the elbow. I hope this part will work for my C70, too. I am sure that the elbow will go on my 2009 XC70 T6 too.
Thanks guys! I have watched all your volvo related videos! First time I am commenting, I had the same problem and was thinking to fix it with a 90 Degree Elbow Hose Joiner :D
I also have a screen wash leak on my XC70, although mine is from the headlight washer tube which is split. I will also be using BMW parts to fix as the tubing is the same and I got some off a scrap car.
Thanks so much! Do you know if the washer pump you fixed the leak to, is for the headlight washers, or for the windshield/rear window pump? I have to replace my windshield pump, but don't know if that is the one in the front, just behind the fog light?
Looking fwd to P3 XC70 coolant flush vid. I just muddled my way thru it, in which I only drained and replaced 50%...enough to raise pH from 6.94 --> 7.48. Having an electronic cooking pH probe gave me a sure way to know that the coolant needed exchange (~70K miles).
Is there a replacement for the elbow that is not from BMW ? couldnt find it from china. only found similar for VW but its straight not 90 degree elbow, so useless.
Could also buy a regular 90 degree barbed plastic elbow for same hose diameter and a bit of extra hose if there is not enough length to cut a piece and eliminate the quick connect completely. I use the barbed plastic connectors (One 90 degree L junction and one T junction) on winter time instead of the one way valves under the washer nozzles. I have heated nozzles and -40c liquid but those stupid valves still freeze already at -10c so for winter I eliminate them.
Hi, I have a problem with my V70 2011, l have a warning for low level of water fluid for the windscreen despite that I have filled it up. I see no leaks. What is the problem ? BR Erik
This is not the first Volvo part which can be found at BMW! I have a Volvo 480 from the 1980s/1990s (never sold outside Western Europe) where the original Volvo part for the headlight support is expensive and very hard to find, but they were also used on BMW and there they are cheap and easily available.
Thx to Evgeny for sharing this video with us! It's his 2015 XC70 D4 not my 2009 XC70 T6. Just to avoid confusion here.
Keep in mind, the washer pump he found with the leak is only for the headlamp washers. The windshield washer pump is forward of the other one. Another source of leaks are the connections at the headlamp washers. Volvo uses stiff corrugated plastic hoses which crack on the ends.
I’m going to order the part and keep it ready, next time my washer fluid is empty I’ll do it. I don’t have the issue on my 2012 S80 yet but that is very good to know ! Thanks to you and Evgeny!
Thank you so much for your videos. I just got a 2009 XC 70 T6 and thanks to your videos. I have already been able to change my blower fan by myself and I’m going to do the rear liftgate struts. Your videos are very inspiring and have saved me a lot of money. Thank you so much, I look forward to all your future posts about these awesome Volvos and I will follow along with mine! Maybe one day I will send you a video to share.
Тоже текла омывающая жидкость, уже собирался туда лезть, но проблема решилась сама собой, когда я стал покупать другую омывающую жидкость. ) В любом случае, спасибо за полезную информацию. Особенно ценно, что вы публикуете коды запчастей-аналогов. Благодарю!
У меня эта проблема уже года два как то проявляет себя, то нет. В последнее время стало течь постоянно. Вот решил устранить траблу…
Thank you. This one is super useful, as i just started to experience washer fluid leak in last couple of months
I also went through this in my 2009 V70, from what I found out this is standard for the P3 platform.
I have an 09 V70 too. I once looked at it but in my case it seems to leak only if I fill it all the way up to the "neck". I might take another look at it sometime soon.
Thanks you so much this has been a problem on my volvo for years and I tried to fix it but failed - I really enjoy your videos thanks for making them!
I have „exact“ the same problem just now! Thx for the video! I have a XC70 from end of 2010…
2 weeks ago I bought an S80 T6 2012.
And first day I noticed that when I fill my washer tank to the top it was leaking. Exactly same problem that you show on this video. So thank you very much gentlemen. I am going to bmw part store tomorrow and fix my issue :)
Have nice days with your Volvos.
If it does not leak all the way out till empty then it could be the seal ring between the neck and the reservoir connection. This is actually my problem right now.
@@volvosweden oh yes it doesn’t. Just like a glass of water maybe half, then it stops leaking. So I will be checking firstly the neck. Thanks 🙏
@@volvosweden Would you make a video for this? I think it might be my issue. I just replaced what you showed in this video but like you are saying, my wiper fluid leak leaves the tank 1/3 full. The issue is this seal ring between the neck and reservoir? Thanks!
A Volvo w/ BMW parts= No bueno. Great video.
I have a problem with my washers leaking but it is from the right side of the car. I think it could be from the headlight washer, but i will replace this elbow at the same time.
Thanks for your excellent videos.
Thanks for this video. I have a 2008 Volvo C70 with the same leak. Removing the fender insert is the key to accessing the elbow. I hope this part will work for my C70, too. I am sure that the elbow will go on my 2009 XC70 T6 too.
Thanks guys! I have watched all your volvo related videos! First time I am commenting, I had the same problem and was thinking to fix it with a 90 Degree Elbow Hose Joiner :D
I have the leak on my V70 T6 AWD (2008) also! Thanks for the fix.
Thanks for sharing this video and it was very much appreciated and helpful
AMAZING hack to get that part from BMW
I had a similar problem on my 2008 where the line actually cracked.... I fixed it with some rubber line
I also have a screen wash leak on my XC70, although mine is from the headlight washer tube which is split. I will also be using BMW parts to fix as the tubing is the same and I got some off a scrap car.
Looks like a job for the weekend for me. Been wondering what to do with this issue. Thanks 😊
Thanks so much! Do you know if the washer pump you fixed the leak to, is for the headlight washers, or for the windshield/rear window pump? I have to replace my windshield pump, but don't know if that is the one in the front, just behind the fog light?
Nice video! Is it the same washer part for the volvos v50/c30 etc. ? Best
Looking fwd to P3 XC70 coolant flush vid. I just muddled my way thru it, in which I only drained and replaced 50%...enough to raise pH from 6.94 --> 7.48. Having an electronic cooking pH probe gave me a sure way to know that the coolant needed exchange (~70K miles).
Will be the same part for 2008 V70? 🤔
Yup I just replaced it hoping it fixes it
Really useful video. Thanks, guys. Stay safe and keep up the good work.👍✌
Is there a replacement for the elbow that is not from BMW ? couldnt find it from china. only found similar for VW but its straight not 90 degree elbow, so useless.
How come that i just got this problem also, S80 MY 2007 287000 km. Thanks for this video! I knew i can trust that you have this video! :)
Another really helpful video. Thx
I need to see a video like this for the prefacelift P3 XC60 too.
A video that would cover headlight washer pop up sprayer too please.
Мне нравятся твои видео ❤👍
Венгрия V70 2009
It will be the only time in my life that I voluntarily visit a BMW dealership 😂😂
Same here🤣🤣🤣🤣
Thanks now I know why it leaks,
Thanks you
Женя молодец))
100%
Could also buy a regular 90 degree barbed plastic elbow for same hose diameter and a bit of extra hose if there is not enough length to cut a piece and eliminate the quick connect completely.
I use the barbed plastic connectors (One 90 degree L junction and one T junction) on winter time instead of the one way valves under the washer nozzles. I have heated nozzles and -40c liquid but those stupid valves still freeze already at -10c so for winter I eliminate them.
Hi,
I have a problem with my V70 2011, l have a warning for low level of water fluid for the windscreen despite that I have filled it up. I see no leaks. What is the problem ?
BR Erik
Sensor? It can be seen in the video
Muy buenos videos saludos desde Santiago de Compostela España 🇪🇸
This is not the first Volvo part which can be found at BMW!
I have a Volvo 480 from the 1980s/1990s (never sold outside Western Europe) where the original Volvo part for the headlight support is expensive and very hard to find, but they were also used on BMW and there they are cheap and easily available.
Thanks 🍻
Is it an AWD?
Yes
Good job
Как связаться с вами? Нужна помощь/консультация
Thanks.
I have the same issue!!🥵
Need a nice rolling work stool. Save your knees! Trust me.
Если честно можешь на русский отдельно видос не выкидывать - на Яндекс браузере переводит нормально, смотрю кучу каналов с анг.голосом
Мне не сложно. Люди просят.
@@volvosweden ну тогда - респект 🤝
Can't wait to get rid of my 08 V70. Crap car!
What mileage do you have on it? What kind of problems?? Tell us