ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
How To Set Up Your Analog Atomic Wall Clock
ฝัง
- เผยแพร่เมื่อ 18 ส.ค. 2024
- In this video, we explain what a clock movement is, go over what "Atomic Time" means, and then demonstrate how to set up and use any of our four main wall clock movements. Use this video to learn how to set up a basic decorative wall clock or one that uses the WWVB Atomic Radio Signal coming from Fort Collins, CO.
Specific movement start times:
Intro: 0:00
Non-Atomic: 1:48
Type A Settings: 2:19
Type A Manual Setup: 4:10
Type B Settings: 5:13
Type B Manual Setup: 7:02
Type B Extra Buttons: 7:48
UltrAtomic Intro: 8:19
UltrAtomic Settings: 8:48
UltrAtomic Manual Setup: 10:33
UltrAtomic Sleep Mode: 11:34
UltrAtomic Eco Mode: 12:04
NIST + WWVB Info:
bit.ly/atomic_...
Additional Support Info:
bit.ly/laxtech_...
Contact Support:
bit.ly/contact_...
Check out our full collection of unique wall clocks here:
www.lacrossete...
Let's Be Social!
TH-cam:
bit.ly/LaxTech_...
Facebook:
bit.ly/LaxTech_...
Instagram:
bit.ly/LaxTech_...
Twitter:
bit.ly/LaxTech_...
Website:
www.lacrossetec...
Thanks for your video. I bought a Sharp atomic wall clock about 18 years ago. It matches your A type. It still works accurately, but changing battery and restart was always difficult. It came with no manual or instructions. I'd reset it each time on trial and lots of error, luck and a prayer.
But this time it kept coming out exactly 4 hrs and 10 minutes behind.
So I came across this video of yours and it covered everything. I tried each option and finally was able to do a manual reset, with confidence. Old Ironsides is still working!
I thank you from the bottom of my heart.
This video was helpful. I didn’t realize you could set the clock manually. After waiting 4 days and changing rooms for directionality (west wall), I’m glad this was an option.
I bought the UltrAtomic model to see if it would pick up the signal in Bogota, Colombia. I checked the WWVB coverage map and in theory it should receive the signal late at night when propagation is at its best. The first night it did not synchronize but I had it in a pretty bad location near computers and power lines and not facing towards Colorado. The second day I hung it from a wall facing WNW (towards Colorado) and more than 9 feet from computers and power lines. It synchronized at 8 pm local time (EST no DST). I was not expecting that! I am 3137 miles away from the WWVB time signal transmitter and 8300 ft above seal level. This UltrAtomic clock is extremely sensitive. Good job La Crosse Technology!
Thank you so much for information. Bought a Sharp Type A clock years ago and couldn’t figure out how to set. Was going to throw the unit out until I found your video.
Thanks so much for video to help me replace battery and reset clock. I don't do it very often and video shows the steps. And telling viewer at what time hack their clock instructions appears smart idea.
This video is a LIFESAVER! My Atomic Hito was a mystery to me until you. THANKS.
You bet, Philip! That's why the video was made. We are happy that it helped. 😊
As an electrical engineer, it's pretty clear to me that for the clocks that permit additional batteries to extend battery life, the batteries are connected in parallel to identically sized cells. (The AA movements put all the AA batteries in parallel, the Ultratomic clock puts two C cells in parallel, and then puts that pair in series with another pair of parallel C batteries).
I don't think you stress enough - If you add additional batteries, they should ideally be all the same batteries from the same package. Even mixing identical batteries from different packages purchased at different times can result in a mismatch between the battery characteristics. Additionally, if you change batteries, change them all at the same time, and replace them with batteries from the same package.
And, of course, alkaline batteries are recommended (both for the AA and C cells) because of their extended lifespans.
Thanks Kirk! We truly appreciate your feedback and attention to detail. Many of these points are emphasized by our support staff if users are having trouble with a product, but we will certainly look into adding additional details to our manuals to further emphasize this in the future. If you should need any assistance with a product, please just let us know.
I have 3 Atomic as I love clocks. These are fantastic. Hope to buy more next year.
I was Lucky to find the ultratomic clock working perfectly at Goodwill for $4 :-)
🤯 Now that's a find!
1:51 I have a clock kinda like that and I finally got it to work after this video!
I just bought the ultratomic clock. I did the setup, put it to the side and forgot about it. A few minutes later I hear the gears going. It already synced up! I got all 4 batteries in and I'm looking forward to keeping this clock for a long time.
Happy to hear that, Daniel. Thanks for the comment! We hope you enjoy your clock for many years to come as well. 😊
Excellent video! Thanks!
love atomic clocks I have 3 in my apartment ones digital the other 2 are regular atomic wall clocks
Great to hear. If you're ever looking for more you can visit us at: www.lacrossetechnology.com/
Just got the UltrAtomic clock displayed in this video.
Looks great and was easy to set it to the correct timezone. Almost completely silent.
Thank you!
One small concern, the second hand isn't completely aligned with the minute points. Is there a way to fix this?
We are happy that the setup of your new UltrAtomic clock went smoothly. Unfortunately, there is no way to manually adjust the second hand, and we sincerely apologize for any inconvenience. If you wish to return the clock, please get in touch with our store directly at 608-785-7939 or via email at store@lacrossetechnology.com
Do I need to turn DST switch to off when daylight saving ends? and switch it on when daylight saving starts?
Nope! The WWVB signal should adjust this correctly once your clock receives the radio signal. The switch is just meant to tell the clock whether you're in an area that follows DST or not.
Thank you so much!!!
Just got my Ultratomic clock. Watched the video. So far the clock is not getting the signal from Fort Collings. I took it outside, 75 feet away from any building and still no signal. I read that atomic clocks have a better chance at getting the signal at night. So I placed the clock by a window and will check tomorrow. I am on the East coast in the NYC area on the New Jersey side.
Sorry for the trouble. It is not unusual for it to take a little longer being on the east coast. If you're still having issues, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook page for further assistance.
@@lacrossetechnology I forgot to follow up on my original comment that the clock started working as soon as it got dark. I suggest you update the information in the small booklet that comes with the clock and letting people know that they need to be patient and leave the clock overnight by a window facing Fort Collins.
i love clocks
In a hospital trying to help out the staff by adjusting the clocks for DST - this is the most complicated clock I've ever seen. Why not just have a wheel on the back to adjust like every cheap clock has?
Our sincere apologies for the trouble getting your hospital's clocks set correctly. The WWVB radio signal that our atomic clocks are designed to receive may not reach all locations, and we are truly sorry for the inconvenience of these not adjusting automatically for the DST change. Due to the nature of these radio controlled parts, their movements work differently than normal quartz clocks that feature a single set dial. This video offers manual time set instructions for each of the movement types you may have. If you should have further questions, please let us know or feel free to reach out to our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page.
Watching the video may help. It explains the function of everything and how to set it.
This shit is stupid
737
@@lacrossetechnology
7:40
Hi can anybody please advise please...Im in Ireland Europe and have an ALBA battery operated kitchen clock. The battery ran out so I've inserted a new one. I've only just noticed it does say radio control on the front of clock. So with new battery in, the hands are going around and when I get to the time I want the click to stop at... Im pressing set...didnt work ...pressed reset nope and the other tiny little button that I actually need a pin to press these three buttons that say "reset" "set "and "wave" (?)....it stops for a second at the correct time when I press the "set" Button and seconds later it starts spinning again! I never actually know the clock was radio conrolled till u mentioned it and i spotted the small print.. Do u think it could be difference for my location!! Would really appreciate your help or advice. Many thanks
Hey Lisa, unfortunately your product is not an item made by us, and there very well could be differences in how the clock will function compared to the instructions shown in this video. And though we make no promises, if you could please pass along an image of your clock's movement (the back of your clock), in a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page, we'd be happy to try and help decipher the instructions you should follow. We are sorry for the inconvenience.
I have a type A clock. Recently it stopped keeping accurate time. I removed the batteries and after several hours installed new fresh batteries. The hands started spinning but didn’t stop at 12:00. The minute hand would go to 11:40 or so. After manually setting the correct time it always adjusts to about 20-22 minutes slow. I sent an email to support who did not respond. I did get an email asking how they did. When I checked the La Crosse website it shows resolved. What?
Hey Dave, our sincere apologies for the trouble with your clock and for the support ticket issue. Did the email provide a support ticket number? We'd love to help get this corrected.
@@lacrossetechnology the ticket number was 108153. Several days after resetting the clock, I have taken the clock apart and manually moved the hands to the correct time and it still adjusts itself to 20 - 22 minutes slow.
Thanks, @@guitar1950! Our staff will be reaching out via email again here shortly to help get this figured out. Sorry again for the inconvenience.
We have a type B that has been, for the most part, working fine for several years. Recently it has begun to randomly set itself to different times randomly. (It never does find the correct time.) I've changed the battery several times. We live 9 stories up and the clock is on an outside wall. I don't think the signal is lost as we also have another La Crosse clock in the next room that works just fine. Do these movements just wear out? It's a nice enough looking clock that I'm considering replacing the movement with a cheap generic (manual-set) movement and calling it good. I considered the manual setting as mentioned in the video but that button is missing from our clock... just a hole where it should be...
Hey Dana, we are truly sorry to hear this and apologize for the inconvenience. For further assistance on this case, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page. We look forward to helping figure out a resolution.
basically if you bought a sports car and it doesn't really want to go fast don't worry about how much you spent on it just drive it in manual mode it'll be okay forget about the reason why you buy it you bought it. My atomic clock runs really well when it runs but when it doesn't run or the batteries die I don't know why it has to take days for it to find the right time
We apologize for any inconvenience, but this is a limitation of how radio-controlled clocks work. Having the front or back of the clock facing Fort Collins, CO and moving it near a window and away from other electronics can help speed the reception process up. More information can be found on the NIST website here: bit.ly/atomic_time
My old lacrosse clock died after 20 years and several drops off walls so I recently got a type b clock. I’m in MA and it’s on a south facing interior wall so I need to put the clock in a west-pointing window to set it. It got the time after a night or two and was working fine until Daylight Savings “spring ahead”. Despite being set to DST, the time didn’t change. So I put it in the west window for 48 hours, still no change. After watching this video I pressed the wave button and put it back in the window as it was moving to the midnight setting. Just checked a couple hours later and it’s now set itself, but it’s still 1 hour behind DST. What gives? Does the DST switch actually do anything? Frustrating.
@@pskirby128 Quite strange. We are sorry for the trouble and would love to help. For assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook page if you haven't done so already.
@@lacrossetechnologyI left it another couple days and it adjusted to the new DST time. Odd.
I used to clean a medical building that had these clocks in every room. Whenever a battery would die they would throw away the clock because nobody could figure out how to reset it. 😂 I had so many of these. Friends and family all got free clocks for a year. I still have to look up how to reset them every time they spaz out or need a new battery. Why not put instructions on the back of the clock itself? I wonder how many get thrown away because of people getting frustrated.
Many of our newer models do have instructions printed or stickered on the back. We are very sorry for any inconvenience, though it sounds like you came out ahead. 😉
I have a question, will the ECO mode work on the UltrAtomic movement if I had a manual time setting?
Hi Bukui, that's a great question and one we should be discussed in more detail in the video. Unfortunately, when running full manual mode the UltrAtomic movement cannot run ECO Mode. This feature requires help from the WWVB signal to know what times to turn off the second hand function. We apologize for any inconvenience or confusion.
Non atomic 1:48
Type A 2:19
Type B 5:13
UltrAtomic 8:19
How do I know which clock I have, A or B?
@@cubarnettYou can look at how the movement shapes like on the back. You can also look at the behaviour. If it stops at 4:00, 8:00 or 12:00 on setup then it is type A. If it cycles a full turn around the clock then stops then it is type B.
I took the clockworks out of the original clock and placed it in my living room clock. The clock hands do not show the correct time. Do the clock hands need to be set at a particular position (e.g., twelve o'clock) in order for the clock to match the Ft Collin's signal?
Hey David, we are sorry to hear about the issues with your clock's movement. If you've followed the steps outlined in this video for your movement type and the hands are not correctly stopping where they should (4, 8, or 12 o'clock position) during the initial WWVB search, this positioning issue may not be easily fixed. Our clocks are not designed to be taken apart and we should note that doing so does void your warranty. However, for further assistance please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page.
For the Type B, why isn't there a manual reverse option? Its very annoying when I have to set it manually, only to miss my time and then have to go all the way back around.
This is a limitation of the radio controlled movement to help keep it correctly synced when the WWVB signal is received. We do apologize for this inconvenience.
When setting up the ultratomic clock, if we are setting up a different Time zone in-between GMT 0 and -11 but the country doesnt use DST, do we still have to set the DST switch to the ON position? Will keeping the DST switch OFF, maintain the clock with the accurate time for said country without DST on that time zone? Thanks in advance
For this situation, the DST switch should be kept in the off position to keep the time running correctly. 😊
I just learned that if I transfer a Lacross atomic clock to another clock face, I need to put in a pin in the back of the clock and set all the arms at the twelve o'clock position. How do I reinsert (realign) a pin into the back of the clockworks after it was taken out?
David, this unfortunately may not be possible. For further assistance please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page.
I have a type A, and my second hand is not turning. Clock has the correct time but the second hand is stuck at 12. any suggestions? battery replaced
Our apologies for the trouble. For further assistance with this, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page. We look forward to helping get this figured out.
I have recently replaced the clock battery and decided to go with lithium. Is that going to be a problem? Should I revert to alkaline?
Hi Aunt, lithium batteries may work, however, if you experience any problems, we'd highly recommend sticking with reputable alkaline batteries for the best results.
The instruction manual sent me here but this is different than the Lacrosse clock I have - the WT-3102-S.
Our apologies for any confusion. The WT-3102-S uses a Type B movement covered specifically starting at the 5:13 timestamp in this video. If you should need further assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook page. We are here to help.
I live in Hawaii does this clock utilize WWVH? so far I can't set the clock. Note I have 2 of these and the first one was no problem
We're truly sorry for the trouble. As mentioned in the video, the different time zone abilities will depend on the model clock(s) you own. For use in Hawaii, the UltrAtomic movement will likely be necessary to use the "atomic" feature and receive the correct WWVB time signal. Please review the times in this video for each clock movement you own, as they may work differently. If further assistance is needed, please reach out to our support staff directly here: bit.ly/contact_techsupport
I have National TC 201C secondary clock , that need 24 DC polarized 30 sec pulse
For help with a La Crosse Technology device, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page. We'd be happy to help in any way we can.
I only can find 2 models of the Ultratomic for sale, are there plans for other dimensions and face designs?
Currently, none are in development, but we're curious about what you'd like to see. We'll make sure to share these thoughts with R&D for future consideration.
@@lacrossetechnology Thanks for the reply. Just like to see more modern number font. Thanks
I have what appears to be an older version. It has a 4 position switch for time zone and a 2 position switch for DST or not. There are three buttons, SET, RESET, and WAVE.
.
I changed the battery and put the clock where it is facing west (toward Ford Collins, CO). No satisfactory result after several hours. Another vendor's clock properly set, but this one does not respond. I have it set for Eastern time zone and for DST.
.
Any suggestions?
Hey Sam, as mentioned at the 7:02 mark in this video, it can sometimes take up to 5 nights for the clock to receive this WWVB signal. In the meantime though, feel free to set the clock manually following the instructions using the SET button. But be sure to have the switches set correctly, as once the clock does pick up the WWVB signal it will override your manual time settings. We are truly sorry for any inconvenience. If you should need further assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page. We assure you we are here to help in any way we can.
You have a type B which is what I have. It's explained at the 5:13 mark. Hope this helps.
I set my Ultratomic clock up correctly, but instead of initially setting to 4:00, it sets to 3:52. When it receives the atomic signal, it also sets 8 minutes behind actual time. I tried setting manually to the correct time, then resetting for atomic mode, same result. More frustrating than that, there is no actual phone support, and I have no idea when submitted requests online will be answered. Probably returning this otherwise nice clock 😮
Hey Andy, sorry for the delay and for the trouble with your clock. Our support staff will be responding to your ticket here shortly for help getting this resolved. Sorry again for the inconvenience, this is highly unusual.
@@lacrossetechnology Thank you. I did miss a call from your team Monday. I returned and replaced the clock through Amazon, just waiting for the replacement. I did every possible troubleshooting procedure, but I believe the minute hand didn’t have a correctly calibrated position. Looking forward to another try!
The minute hand on my Ultra Automatic La Cross is hanging limp. What do I do?
Oh no! Sorry for the trouble. For assistance on this matter, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page.
I have an older WT-3181 atomic clock. It worked great for years. It stopped a few days ago. I replaced the battery, and the hands don't move. In fact, it doesn't move even with the manual set. I did the "press button 20 times and wait 15 minutes" thing and it still doesn't work. Is it simply broken? Is there anything else to try?
Hey Gary, our sincere apologies for the trouble with your clock. Assuming you're using a new alkaline battery, and these functions are still not working, it could be that the unit is broken. For further help with this, please send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page. Or alternatively, you can message our support staff directly here: bit.ly/contact_techsupport
@@lacrossetechnology Hi - thanks, I submitted the form to tech support.
How advanced does the forecast operate on the weather station s84107?
Hi Lisa, the calculations for your station’s weather icons are based on its internal barometric pressure reading. Keep in mind, these icons are designed to display a prediction of your weather to come within the next 12 hours, not necessarily your current conditions. And because weather can be a hard thing to predict, even for professionals, we cannot claim these to be 100% accurate. For most of our stations, these predictions fall between 60% and 80% accuracy after the first ten days from the initial startup. For more info, you can find FAQs, your product manual, and even a support video on our website here: www.lacrossetechnology.com/s84107?type=manuals -- We hope that helps clear this up, but please let us know if you have further questions.
How far from Fort Collins Colorado can you be for this to work?
We have customers using these in all four main U.S. time zones, and though distance plays a role, your specific home surroundings are often more important. For instance, if you live in a valley, are surrounded by buildings, or have other strong radio signals nearby, these can all cause interference, which can delay or even fully block this radio signal from reaching your clock. Moving the clock near a window, away from other electronics, and having the front or back of it face Fort Collins, CO will help increase its chances of catching this signal and having it adjust your time automatically (typically happens within 3-5 nights). We do apologize for any inconvenience. If you find yourself in a predicament where the time hasn’t adjusted automatically, it may be best to make sure to have your settings adjusted correctly but to also set the clock manually for the time being. This will allow the clock to remain at the correct time even if the WWVB signal is picked up in the future. More about how this signal works can be found here: bit.ly/AtomicTime
I’ve had this clock for quite a few years and the last couple of years I’ve had soooo much trouble once the battery dies. When I put in a new battery it will just spin until the battery dies. I’ve somehow gotten it to stop but I have no idea what it was I did. I’m so tired of this. Please help. I’m in Southern California.
If you've reviewed this video and followed the setup steps for your clock's movement, and are still having trouble getting it to function correctly, please reach out to our support staff directly here: bit.ly/contact_techsupport -- We are truly sorry for the inconvenience and hope to help get this corrected for you soon.
my second hand stops and starts randomly while the minute and hour hands maintain the correct time. It is a new clock with a new battery, what's up?
Hey Doug, sorry for the trouble! Please try pressing the RESET button on the back of the clock. This should restart the clock back to it's original out of the box condition. If the second hand is still moving randomly, please also try installing a new fresh regular alkaline battery into the movement, other battery types can have unexpected results. And if this problem is still occurring after these steps, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page for further assistance. Our apologies again for any inconvenience.
2:37 I have this clock but the hands fall to 6:30 and fail to move. Any suggestions?
We first recommend performing a restart with a new set of regular alkaline batteries. The steps for this start at the 4:08 timestamp in this video and will walk you through how to manually set the time. If the clock is still stuck, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page for further assistance. Our sincere apologies for any inconvenience.
So basically
1. Set the button to your preferred time zone, DST off/on and insert a battery.
2. Press set and adjust your time manually!
The atomic part of the instruction is unnecessary as it will do it anyway :)
i have a type a movement. its does not move when i press central time button after battery set it to 4 then i held c button nothing happend ??
Hi Georgia, we apologize for the trouble. How long have you had the clock powered on? As mentioned in the video, for the Type A Movement, you'll want to wait for the clock to receive the WWVB signal before the time zone buttons will move the hands into the correct position. This can sometimes take a few days, depending on your location. Once you notice the hands changing time on their own (no longer stopped at the 4, 8, or 12 position), that is when you'll want to firmly press and hold the Central Time "C" button until the hands begin to spin. This should set the clock to your current time. If you need any additional help with this, please feel free to reach out to our support staff here: bit.ly/contact_techsupport
I have a LaCrosse Atomic clock. Every time when there is a time change (like today with Daylight savings time), I had to move the clock to the window to get the time 'adjusted' to the right time. Apparently, my living room is too far in to receive the WWVB.
So bottom line, atomic clock is not a good fit for my living room.
We sincerely apologize for the trouble. There are many factors, such as distance, interference, and location within your home, that can disrupt the WWVB radio signal reception coming from Fort Collins, CO. And we unfortunately cannot guarantee the signal will reach all locations. Moving the clock near a window and away from other electronics is the best solution, and we are sorry again for the inconvenience.
I noticed mine didn't reset Sunday morning, as my computer and phone did, but that afternoon, it read the correct time. I came here to find out why the delay. Is it designed to reset at the "proper" time (1:00 am?) or a later time?
@@russellharvey7096 Whenever it is able to pick up the WWVB signal. More info about how these work can be found here: bit.ly/atomic_time
@@lacrossetechnologyWill the new UltrAtomic LaCrosse clock (the one that requires 4xC size battery) fix this issue? The official forum stated that it has enhanced reception and multiple antennas built in.
@@expresscontent4346 We cannot 100% guarantee it, but it's close. Our UltaAtomic clocks feature an advanced modulation scheme with new data encoding, which helps with reception and reliability in nearly all locations. These enhanced clocks also come with additional features, as shown in this video. So, yes, it is very likely our UltaAtomic clocks will help resolve your reception issues. All our products on our website feature a 30-day money-back guarantee, so there's little risk if you want to try it out. www.lacrossetechnology.com/products/404-1235ua-ss
I have the wt 3101. It won’t receive the signal. I have a smaller lacrosse clock and it picks the signal up in one night. Is this clock defective?
We apologize for the trouble. Sometimes different products can take longer than others to receive the WWVB transmission. If it’s been more than 5 full days, and after watching this video you have the clock’s settings adjusted correctly, you may want to reach out to our support staff here: bit.ly/contact_techsupport for further troubleshooting. Sorry again for any inconvenience.
After about a year stashed in one closet,new; I decided to install it, followed all instructions and works simlessly,no problems so far. And I’m a “clock maniac”; clocks all over.
what do you do if you have the ultratomic clock and you are setting it up but it goes to 4 oclock and stays there for 5 days? It will work in manual mode otherwise but would prefer the atomic mode?
Hi Tina, sorry for the trouble. This is quite an odd case, as the UltrAtomic movement should pick up this signal pretty quickly (typically within minutes). If you don't mind, where are you located and where do you have the clock positioned within your home?
@@lacrossetechnology madison near windows
Thanks@@tinadenker6254. If your clock still hasn't picked up the signal, our recommendation would be to remove all of the batteries, press the SET Tab 20+ times, wait an extra few moments, and then follow the setup instructions outlined in this video again, but with a new set of alkaline batteries. If your clock still has trouble syncing with the WWVB reception after this process, we ask that you please reach out to our support staff here: bit.ly/contact_techsupport for continued troubleshooting and possible replacement. Sorry again for the trouble.
@@lacrossetechnology thanks that did the job!! So excited to be using this style of clock
Hi I would like to take La crosse technology clock to India. Which one can you suggest me? Thanks
Our Atomic clocks are designed to work with the WWVB signal broadcasted here in the United States. This signal is unlikely to work overseas, however, as covered in our video here, our clocks can all be set manually as well. With that in mind, we'd simply suggest a clock that fits your look and price range. You can find our current selection of wall clocks here: www.lacrossetechnology.com/collections/analog-wall-clocks
I love this clock. However, I have since moved overseas so it now belongs to my son in California.
We're happy to hear at least it's still being put to good use. 😊
I have Time Zone set to "P" Pacific and it keeps setting to 4 hours early. It is it 5pm here in California it sets to 1pm. Any idea how to fix this? Just got this clock today 09/19/2023
Sorry for the trouble; that is quite strange. For assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook page. Our team will be happy to help get this corrected.
@@lacrossetechnology I have contacted them and I am waiting for 5 days to see if my clock will get the signal. Currently I set my clock manually but it is off by 15 seconds so I don't think it is resetting itself with the signal. If it does not correct itself by the end of 5 days I will contact TS again.
@@MikiCab1 Thanks. We appreciate the cooperation and hope it can connect with the WWVB signal soon. As our tech support probably mentioned, moving the clock away from other electronics, near a window or outer wall, and having the front or back face Fort Collins, CO, can all help it receive the signal faster. Our apologies again for the inconvenience.
@@lacrossetechnology I fixed the problem by returning the clock and I bought the Ultratomic clock. From the description it has better reception and it sync'd after 8 hours at the same location the other clock would not sync at. I took the original clock around my house and found it would sync in my back yard or in a window upstairs so that would not work for me. I am in California in the SF bay area so I would think I would get a good signal here but probably getting a weak signal. There are no mountains for miles so don't know why I am not getting a better signal. Thanks for your help.
My outdoor clock is always set 2 hours ahead eventhough I set it for Pacific as I live in Las Vegas. I have reset it and taken out the battery. What is wrong?
Hi Steven, sorry for the trouble. Could you pass along the model number of your clock? This should be printed on the back, typically near our logo.
La Crosse Technology it’s WT-3181P.
Thanks@@Stevie.C Try holding down your PT Time Zone button until the hands begin to spin. They should rotate into the correct time. If they do not, try and restart the clock via these steps:
1. Remove all of the batteries.
2. Press the Set Tab at least 20 times.
3. Wait at least 15 minutes before installing a new set of alkaline batteries.
4. Then follow the same setup instructions starting at the 2:40 mark in this video.
Sorry again for the inconvenience, but we truly hope these steps help resolve your issue. But if you continue to have trouble, please reach out to our support staff here: bit.ly/contact_techsupport
La Crosse Technology I will try that. Thank you.
I have 4 LaCrosse clocks which we began collecting many years ago. I am inquiring about the Analog Type A clock, model WT- 3144. Repeatedly, after a fresh battery, it runs non-stop, even days, while situated facing west, for days and days until I remove the battery. Will the "Press 20 maneuver " you showed do any good?
Patricia Schultz
Hey Patricia, thanks for the support over the years and for reaching out here on TH-cam. Our apologies for the trouble with your WT-3144. Our staff suggested to go ahead and try removing the battery, pressing the SET Tab 20+ times, and let the clock sit without a battery for at least an hour. After this time, please try installing a new alkaline battery (specifically alkaline, as others can have varied results). If the hands still spin where the hour hand goes all around more than once, it is likely an issue with the movement. In that case, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page for further assistance.
Can this UltrAtomic clock pick up the signal in a basement? Because I just bought one and I am thinking about putting it in my Basement.
Hey Jack, thanks for the message. Out of all of our atomic clock options, our UltrAtomic model will offer the best possible reception to be used in your basement setting. We're confident there shouldn't be any issues.
@@lacrossetechnology Thank you!!! I got worried if it was not going to work in my basement. Thank you again!!!
@@jackhoeft9761 You bet!
La Crosse Technology if I have a problem I will contact you guys. Thank you!!!
I have a non atomic and it is not working even with a new battery and i cannot get it open. Version 4043725
Our apologies for the trouble. For better assistance on this matter, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook page. We'd love to help get this corrected.
my clock has quite working....can i change it toa regulaR CLOCK
Hi Mary, we are sorry to hear this. If the steps in this video did not resolve your clock's issue, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page for further assistance. Our apologies again for any inconvenience.
This one working in United Kingdom
My Type A doesn’t stop at 4, 8 or 12 o clock and trying to set it manually doesn’t work.
Hey Joe, our sincere apologies for the trouble. Please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page for further assistance on this matter.
Lacrosse clocks are a scam, they dont actually work.
@@dylanfenster6785 No they are not a scam. Also, it is a bit too harsh to call it a scam just because yours didn't work. Mine worked perfectly
It might be a Type B.
@@dylanfenster6785Stop with the attitude. If you have nothing nice to say don't say it at all.
What do you do if a Type A is always 15 minutes fast?
Our recommendation would be to remove the batteries, press the Set Tab at least 20 times, and wait about 15 minutes before installing new alkaline batteries. After this, follow the instruction as normal waiting for the clock to receive the WWVB signal, once it does, press your correct time zone button to have it set to the correct time.
If this proves ineffective and your clock remains 15 minutes fast, please reach out to our support staff directly here: bit.ly/contact_techsupport as your device may need to be replaced. We apologize for this inconvenience.
Thanks for the tip. Our ultratomic clock sets to 3:52 instead of 4:00, and when it receives the atomic time signal, sets to 8 minutes slow as well. Very frustrating, will need to return.
Why does our second hand not move but the hour and minute hands keep perfect time?
Hey Darold, which type of clock and or model do you own? For instance, the UltrAtomic movement comes with an Eco Mode option as discussed at the 12:05 mark in this video.
@@lacrossetechnology Ours is just an "Atomic Clock WWVB with Type A movement. I changed the battery today and all hands, including the second hand, turned to 12:00 and stopped. We'll see if it sets itself now.
@@drld That was going to be our next suggestion (change the batteries), as a stopped second hand is often an indication that the power is running low. If you should need any further assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page.
My seconds hand came off how can fix it back ..
Oh no! For assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook page.
digital clock?
Though much of this information is relevant to our digital atomic clocks, the instruction for those specifically can be a bit different from model to model. For assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook page.
the clock is now at 12pm how to solve it?
The specific instructions will depend on the clock model and movement you own. Assuming you own a clock with one of the movements covered in this video, we highly recommend reviewing that section for detailed instructions on how to use the Atomic Time or manual set functions. For further assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook page. We're here to help in any way we can.
I have the Non Atomic but it’s not working wtf????
Hey David, we're sorry to hear that and apologize for any inconvenience. For assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page.
Excellent
#Realnaturalhandicrafts
I just bought this clock an it going back tommorow to much work just for the time
We're truly sorry to hear that. If you have any specific questions, we'd be more than happy to help get them answered.
I recently bought your atomic clock and the minute hand has stopped moving.
If you've followed this video's instructions for your specific movement to reset the clock (set it manually), and are still having this issue, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page for further assistance. We apologize for any inconvenience and look forward to helping get this corrected.
Crazy clock.
Hey Chau, though they can sometimes seem that way, we assure you they are pretty easy to use. If you should have any questions or trouble with your clock, please just let us know. 😊
Okay
O n
Hello
Hey Medara, thanks for saying hi! We're here to help if you should have any questions. 😊
Had ours just over 2 years (404-1946-INT 18-Inch Indoor/Outdoor Classic Plastic Pewter Atomic Analog Clock) , then the temperature and humidity gauges start to rust up and don't work no more. Plus moisture got inside the clock face. So obviously not outdoor proof!
Save your money. Certainly not worth $60!!
Hey Bob, we are deeply sorry to hear this and apologize for the trouble you've experienced. For further assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page.
We would love to help in any way we can.
My clock is a type B
My hands just spin ?
As mentioned in the video at 1:18, spinning hands are either the clock adjusting automatically or a sign the batteries installed are under or overpowered. New alkaline batteries will often help correct this. For further assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook page.
14 min video to say what could be said in in 90 seconds
Oh yeah? People from Wisconsin are very friendly, know how to make cheese, drink lots of alcohol and tip cows. What now b****?
I thought it was very informative
Just want no scientific directiod
Hey Connie, our apologies for any trouble getting your clock functioning correctly. For further assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page. We assure you we are here to help in any way we can.
5 fking nights? Bro...
Hey Leroy, we do apologize for any inconvenience. Moving your clock near a window, away from other electronics, and having the front or back of it face Fort Collins, CO will help increase its chances of catching the WWVB radio signal much faster. You can also simply set the clock's time manually if you'd like it display correctly from the start. Just be sure to have the atomic settings (time zone & DST switches on Type B movement) set correctly, as the WWVB signal will override a manual time setting. More about how this signal works can be found here: bit.ly/AtomicTime
@@lacrossetechnology tell that to the raging cunt that fired someone for "not being able to even set a clock correctly" when it overrode manual setting 3x
:(
:) 👍
@@pancholon5495 If you should need further assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook page. We're here to help. 😊
awfull clocks, i am having. problems. with mine. brand new clock. i am very good with technology. i know a product when it sucks.. this is the one
Our sincere apologies for the trouble. For assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook page. We'd love to help get your clock working correctly.
This is unnecessarily complicated and inefficient.
We're sorry you feel this way and apologize for any trouble. For assistance, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook page. Our team is available to help answer any questions you may have.
junk
Hey Chip, we're sorry you feel this way and apologize for any trouble. If you should have questions or need assistance with a clock of ours, please message our support staff directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page. We assure you we are here to help in any way we can.
DO NOT buy these garbage clocks! They are absolutely worthless as they do not keep time, and they cannot be set by hand. I have 120 of them in my building, not one has the right time, and did I mention, they CANNOT be set by hand. All 120 clocks are now in the dumpster where they belong.
Hey Dylan, we are truly sorry for any trouble our clocks may have caused. If you followed the instructions within this video [to set them manually] we're confident they would be up and running correctly. However, if you noticed there was a problem, our support staff is always here and happy to help. You can contact them directly here: bit.ly/contact_techsupport. Or alternatively, send us a private message on our Facebook: bit.ly/LaxTech_Facebook or Twitter: bit.ly/LaxTech__Twitter page.
@@lacrossetechnology I just reset 120 of them 3 days ago for daylight savings. Here's the thing, NORMAL clocks have a small plastic wheel on them that allows you to move forward an hour in just 3 seconds. Your special clocks, have no wheel, and when you put in a new battery, you have to wait a few minutes just for the clock to first reset it self to 12:00. THEN you can slowly set it to the right time. Again, NORMAL clocks take 3 seconds to set, your clocks, depending on the time of day, can take anywhere from 2-5 minutes to set. 3 seconds vs 5 minutes. 😀 As for the antenna function, I have 120 of your clocks, only 2 keep time. The other 118 dont keep time because they are not "in a window facing Denver" as required.
You speak way to fast. Not everybody speak good English like you. Think of your non English customers. The clock is sold in Canada, please do not use WWVB or other letters that mean nothing. Canada is not part of USA. Also your notice included in the package is in English only. I made a big effort with the help of google traduction to communication with you.
Hey Paul, we are truly sorry for the speed of this video. If you'd prefer things slowed down or sped up, TH-cam offers the ability to do this, simply tap on the three dots in the top-right if on mobile, or click on the gear icon in the bottom right if on a desktop. You should then see an option for "Playback speed" -- Use this to adjust the video to a speed of your liking. For additional (French) support, please feel free to reach out to our Canadian representatives at Springfield Instruments via the options below:
Email: info@springfieldinstruments.com
Online Form: springfieldinstruments.com/customer-service/
Phone: 844-687-4040
Our apologies again for any inconvenience, but we hope this extra info is able to help provide the support you need.