Hi my nearside front fog light plastic mount is broken, do you think i can get to the back of it to replace it by undoing just the passenger side arch trim and bumper and levering it forwards slightly without undoing the offside trim and taking off the bumper completely ? I think i have radar sensor in the middle of the bumper also . Regards.
Thanks. Great collection of videos. Is there one to show how to remove rear seat bench of the new Ford Puma. Some loose change has fallen out of a pocket and down into the rear seat bench. But got under head restraint unit and under the rear seat bench. The rattle and metal on metal noise it’s making now when I drive around is so so ANNOYING. Is there anyway of pulling up the rear bench, so I can get under it and these coins out.
Just the headlight bolts and then lift up the unit...have a really strong elastic pin But i think they are led...are u sure they have halogen bulbs🤔? Thx for watching sir
@@howtowithjohn581 thanks for quick response . Yes H1 bulb for high beam is halogen...only when you order full led headlights, DRL on that headlight is a little bit different, you can see on some fotos... So there are only 2 bolts as I saw on Puma?...I have Fiesta VI, when you change bulbs, you have to remove headlight, why easy, they will build complicate ones hehe, but fortunately it is not difficult..
Hi…I know it’s been a while since you posted the video. Do you have to remove the bumper to change the top grille? Where the licence plate is attached to the grille there is a crack where the screw goes into the grille (black part of the grille) it’s quite stable but I’m worried that in time it may loosen. I’m worried about having the garage remove the bumper and cause more issues in the future. Am I worrying unnecessarily about the licence plate? Any advice would be gratefully received. Thank you.
Hi…I know it’s been a while since you posted the video. Do you have to remove the bumper to change the top grille? Where the licence plate is attached to the grille there is a crack where the screw goes into the grille (black part of the grille) it’s quite stable but I’m worried that in time it may loosen. I’m worried about having the garage remove the bumper and cause more issues in the future. Am I worrying unnecessarily about the licence plate? Any advice would be gratefully received. Thank you.
The grille is verry britle and can snap realy easy...you can remove it but only if you have a replacement because will not come out in one piece unless you get the car in the spray boot and give it a bake cicle...to get the bumper and paint flexible. My advice is to ad a strip or two of 3M tape under the plate and will be ok...thx for watching sir
Hi, do you need to remove the front bumper to replace the front lower grill. It looks like you can do it without taking the bumper off. Is it possible? Thanks. Rick.
Hi, there is a big gap on my puma and I mean big where the bumper meets the side of the car. Do you think it can be fixed by disassembling it and putting it back together? Or it will be worse.
Hi...that usualy happends when you park the car and catch the curb...i'm sure that is more than miss aligment...wing edge bent,bumper braket broken...so on But is a start if you want to take the bumper corner off... Thx for watching sir
@@howtowithjohn581 Indeed, there was some misalignment from the factory but the ford performance spoiler caught some pavement. Thank you for your time.
Hi, what is the sensor on the radiator grill for? Is it the external air temperature sensor or the one that decide wether to open or close the radiator grill? Thanx
Hi...that is the exterior temp sensor,tell you on the dash how is the outside temp...the radiator grill is controled by engine coolant temperature...thx for watching sir
They share the same platform and parts as Fiesta or the ,,Thing" Ecobust🙈...is nothing wrong with them mecanic whise...just the asembly proces is so bad...plastic clips that you need to replace once you strip anything,ratling plastics,stearing airbag going loos,electric isues moustly on hybrids due to batery conectors...if you like it go for it but make sure you are covered by waranty...they are expensive to fix out of your poket...take care🥰
Hi my nearside front fog light plastic mount is broken, do you think i can get to the back of it to replace it by undoing just the passenger side arch trim and bumper and levering it forwards slightly without undoing the offside trim and taking off the bumper completely ? I think i have radar sensor in the middle of the bumper also . Regards.
Thanks. Great collection of videos. Is there one to show how to remove rear seat bench of the new Ford Puma. Some loose change has fallen out of a pocket and down into the rear seat bench. But got under head restraint unit and under the rear seat bench. The rattle and metal on metal noise it’s making now when I drive around is so so ANNOYING. Is there anyway of pulling up the rear bench, so I can get under it and these coins out.
Do we have to remove bumper when remove headlight to change H1 bulb for example?
Just the headlight bolts and then lift up the unit...have a really strong elastic pin
But i think they are led...are u sure they have halogen bulbs🤔?
Thx for watching sir
@@howtowithjohn581 thanks for quick response . Yes H1 bulb for high beam is halogen...only when you order full led headlights, DRL on that headlight is a little bit different, you can see on some fotos...
So there are only 2 bolts as I saw on Puma?...I have Fiesta VI, when you change bulbs, you have to remove headlight, why easy, they will build complicate ones hehe, but fortunately it is not difficult..
Hi…I know it’s been a while since you posted the video. Do you have to remove the bumper to change the top grille? Where the licence plate is attached to the grille there is a crack where the screw goes into the grille (black part of the grille) it’s quite stable but I’m worried that in time it may loosen. I’m worried about having the garage remove the bumper and cause more issues in the future. Am I worrying unnecessarily about the licence plate? Any advice would be gratefully received. Thank you.
Hi…I know it’s been a while since you posted the video. Do you have to remove the bumper to change the top grille? Where the licence plate is attached to the grille there is a crack where the screw goes into the grille (black part of the grille) it’s quite stable but I’m worried that in time it may loosen. I’m worried about having the garage remove the bumper and cause more issues in the future. Am I worrying unnecessarily about the licence plate? Any advice would be gratefully received. Thank you.
The grille is verry britle and can snap realy easy...you can remove it but only if you have a replacement because will not come out in one piece unless you get the car in the spray boot and give it a bake cicle...to get the bumper and paint flexible.
My advice is to ad a strip or two of 3M tape under the plate and will be ok...thx for watching sir
@@howtowithjohn581 thanks so much for your kind reply…really helpful..
Hi, do you need to remove the front bumper to replace the front lower grill. It looks like you can do it without taking the bumper off. Is it possible? Thanks. Rick.
Hi sir...you need to remove the bumper to have acces to the fog lights grilles because they clip in to the main lower grille...thx for watching
Does the grille come off separate
Hi, there is a big gap on my puma and I mean big where the bumper meets the side of the car. Do you think it can be fixed by disassembling it and putting it back together? Or it will be worse.
Hi...that usualy happends when you park the car and catch the curb...i'm sure that is more than miss aligment...wing edge bent,bumper braket broken...so on
But is a start if you want to take the bumper corner off...
Thx for watching sir
@@howtowithjohn581 Indeed, there was some misalignment from the factory but the ford performance spoiler caught some pavement. Thank you for your time.
Kuga MK3 is exactly same job or different procedures?
Hi, what is the sensor on the radiator grill for? Is it the external air temperature sensor or the one that decide wether to open or close the radiator grill? Thanx
Hi...that is the exterior temp sensor,tell you on the dash how is the outside temp...the radiator grill is controled by engine coolant temperature...thx for watching sir
@@howtowithjohn581 thanx for the info. Do you remember the torque for the oil drain plug? :)
If you dont use a new copper washer on the plug you can use a good old rachet...if you torque a old pressed washer will leak or snap.
@@howtowithjohn581 I'll use a new proper one ( which has the rubber seal), the manual do not mention the Nm of torque. May be 25, 27, 30 Nm.
Is there any Puma disassemble videos? or as a mechanic did you see any cronic problem about the car?
They share the same platform and parts as Fiesta or the ,,Thing" Ecobust🙈...is nothing wrong with them mecanic whise...just the asembly proces is so bad...plastic clips that you need to replace once you strip anything,ratling plastics,stearing airbag going loos,electric isues moustly on hybrids due to batery conectors...if you like it go for it but make sure you are covered by waranty...they are expensive to fix out of your poket...take care🥰
@@howtowithjohn581 thank you for your reply
do you kmow how to remove the rear lights?
Volendo sostituire il fendinebbia DEVO APRIRE TUTTO IL PARAURTI? Puoi fare un video grz
Thank you, nice explanation.
i broke 2 clips taking wing arch trim off
I’ve got one on rental everything you can think of is covered so I don’t care about any of the issues