How To Install a Bestop Supertop® on a Jeep Wrangler YJ | FULL INSTALL
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- FULL INSTALL VIDEO: A detailed step by step process on how to install the Bestop Supertop® on a Jeep Wrangler YJ. This method will apply to the CJ YJ and TJ models. Set aside approximately 2 hours for this project and work in a clean and clear environment.
Purchase a new supertop here: amzn.to/2PRwRHY
Great video!! We just purchased a 93 YJ with hard top installed. The Bestop soft top came with the sale as well.Your video helped us figure out how to install the soft top as we had no instructions from the seller. Thank you for taking the time.
Really nice YJ! I took my top off and needed a reminder on a few points to put it back on. Your video helped a lot. Well done. And yes, pushing that tightening bar up while lining up the bracket mounting holes can be daunting. Your new top looks great.
love the jeep I have a 94 yj and your videos really help me show what I'm getting into ! keep up the good work!
That's a really nice jeep.
This video really helped out👍
Great video, just installed mine last weekend thanks for some tips. Where did you get the seats???
Great informative video. I too am interested where to go to get the low profile (stainless steal?) bolts you used to attach the tub rails?
What seats are those in the rear?
Thank you for the great video! Just bought a used frame wasn’t sure what went where or even if it was a bestop frame. Video helped a lot.
do you think the top could fit around a custom cage? seems like the top and the poles are higher than the roof line
No. It’ll be too tight
You skipped the part i am struggling with haha.
I have my top clipped at the windshield and buttoned to the back cross bar and i have the windows and 1 corner in but the other side is so far off i was hoping i had messed up some part of the process.
Back to the drawing board for me i guess.
I can’t believe the condition of this Jeep my 93 has a 350 Chevy a 5sp and 35’s and I will have to replace sheet metal because of the rust
I noticed you have a rail bolted to the top on your tailgate. Is that just for looks to continue the rail line around the back? did your purchase that or use something else to make it?? I ask because I want to do the same to mine.
This is so helpful! You just saved so me much time. I just bought an 87. I’m overseas and trying to find parts when I get State side so it’s hard not physically being there to look at it. Anyway, I’ve been looking for that windshield part for a week or so, just wanted to say you are correct there isn’t much out there on this top but this video was helpful.
The dog looks like it didn't want to help. Probably had plans for a cat that day
Now that you've had it for a couple of years, what is your overall assessment of it? Is it loud on the highway? Does it leak around the doors? I am considering the switch from an OEM YJ top to this one. Any info that you can provide would be much appreciated.
Is it same cover with full or half doors Ik some hardware is different
Hey man. Thanks for the detailed video. I’ve had a rampage soft top for about as long as you’ve had the bestop. I’m not supper pleased with how it’s wearing and just the overall quality of it. I wouldn’t be upgrading any time soon but how is your top holding up? Is it still comparable to new in quality? Thanks 🤙
Bestop lasts for years and years. My last one was 9 years old and still in ok good shape when I reskinned when bored.
Great video!! covered everything important. By far the best instructional I've seen so far on this top. Thanks
INSANELY beautiful jeep dude. I got a 95 YJ. Seen better days but i hope to eventually get it to be as good looking as yours man
The screws for the upper windshield corners didnt interfere with the spreader bars sitting flush against the windshield? Mine are. How'd you work that out
very clean well maintained yj!!!!
Very nice video! What mirrors do you have? Mounting brackets that go with them?
Best Top's 2017 Pavement Ends model, for YJ, with clear rear window seems to be pretty good quality, slightly better than the the older version from '01.
As a replacement, it went on super easy, I would guess it took 45-1hour with half doors and side windows and rear. Just center it and the rest flows (bend the arms to take it off and leave them that way until you are have the corners clipped in on the rear/bottoms).
Got mine for $335 with free ship, from ebay or amazon. They have a coating to stop UV degradation, or slow it. Zippers are very slick, easy to start. Went on super easy in 75 degree, cloudy weather, sunny day could be a touch better, but no complaints at all. '90 YJ, stock.
I enjoyed your video very informative,what part number is that top ? I have called 4wp today, they are having a hard time figuring out which one mine is with the factory Hard doors like yours, Thanks .
Thx for the info!! Very helpful. Where did you get those spice roll bar cushions?
Sense installing your BestTop , does the top shake with the wind 💨 as you drive down the road way or highway
How has this top held up?? I am looking for a new top at this moment!
The close up around the door is exactly what I needed to see,just ordered for my cj7. Thank you!!
I have the factory hardware... does anything still need to be drilled?
How’s it hold up to rain or snow at the doors particularly around the rounded edge of the top windows? Does it leak thru when driving etc?
You have soft top missing parts to the door buddy
Can you explqin
I’ve heard best top is the best quality but I don’t like how their rear section looks, like it’s so high
Awesome YJ! Just got the supertop delivered today and ready to replace the factory top on mine that starts removing itself when we get up to highway speed. Where did you get your steering wheel btw - love the look.
Thanks. Wheel is made by Grant. It was on the jeep when I got it. The previous owner picked it up in the late 90’s
Fantastic- will search around. Appreciate the reply.
hi can you tell me What type of model or serie number is your softop do you know where can i look for one like yours thank you
You answered my question. I want to get full door with window for my soft top.
If you would have left it in the sun for a lil while to heat up it would have stretched on it's on when you installed it
Where did you get those cool stainless bolts that you secure the Supertop body caps with?
So can you please tell how to start from either the front or the back? You missed so much in this video! If I was paying for this I would demand a refund! This is crap!
I didn’t miss anything in my video. What specifically are you trying to do?
What size bolts are used for channels?
thanks much helped answer questions i had.
Looks good!
hows the top holding up?
Still great!
is it black denim ?
what rear bumper is that? I have the same one just dont know who makes it!
+Dustin Richards don't know. I assumed it was just stock. It's nothing fancy. Just clean and plain haha
definitely not stock. ill keep trying to find it! lol nice jeep btw. quality restore.
any conclusion on the name of the bumper? great video, very thorough. picking up my '95yj on Monday
how do I put in the back window?
It zips on
I don't think i can get this done in 16 minutes. But I'm going to try.
You can’t he time lapsed! Duh!
Will jeep cj7 soft tops fit a yj
No
what size tires ?
Tell me about those doors
They open and close and keep the wind off of you at cruising speeds.
Did they come stock ? I'm looking for a set of full doors ,but what I've read is that the windshield may need to be adjusted to make them fit. I have a 93 with some half doors.
No, they’re off of an old CJ I believe. I think I had to adjust the windshield a little bit it’s just a couple bolts.
I might talk about them in this video. Check to see. Maybe I do... I seriously can’t remember. th-cam.com/video/P6rANS7te-k/w-d-xo.html
nice video!