Install Daytime Running Lights Kia Picanto
ฝัง
- เผยแพร่เมื่อ 11 พ.ย. 2021
- How to install DRL's on a Kia Picanto MkII.
@baconbuttties
If you'd like to support the channel you can buy me a beer here! Cheers! 🍻www.buymeacoffee.com/Livingwe...
As an Amazon Associate I earn from qualifying purchases. By buying through any of the links below I will earn commission to support the channel at no extra cost to you. Thank You.
U.K. Associate Links
P21W Bulb amzn.to/3GGTGqB
U.S. Associate Links
P21W Bulb amzn.to/3pRJmpY
Changed mine, didn't Jack up and take wheel off,
Turned wheel full lock, undone the fixings, pull plastic cover back enough to get my hand in,
Easy
that's a good idea..... clever ducky
I managed to do this without taking the wheel off in my 2012 Picanto.
I went through the bonnet, and reaching around the washer container (I had to unplug some wires for more wiggle room). It was possible.
It was very fiddly, and a lot done by feel rather than sight. But a lot less effort than taking the wheel off!
Thanks for the video all the best 👍
Very helpful, thank you!
Great video, thanks
If you don't have a jack or don't want to remove your wheel you can remove the bumper to access the lights which is easier in my opinion. There's a screw in each wheel arch and then four push fit fixings under the bonnet. You'll then need to unclip the bumper from the wheel arch, remember to put something soft down on the ground so you can lay it down without scratching it. There's also a video on TH-cam if that helps!
Thank you very much for this comment. I'm going out to try it now. 😄
remove the bumper ? you're having a joke....
@@rosiecesareo8092 epic fail
Thank you so much for this, I’ve managed to get the plastic off with my wheel still on and turned inwards. Couldn’t find anywhere with a video like this :)
Glad it helped
what do you mean turned inwards ?
@@noteynote4873I kept my wheels steered to the left and managed to get my hands into the wheel arch so I didn’t have to take the wheel off.
Correct just undo bottom two clips and bend and twist bulb holder. No jack😮 no wheel off🎉
Never seen a sup. without a beer in his hand.
Great video. I've just replaced my DRL (without removing the wheel) thanks to your tips. Halfords wanted an extra £60 as they said it would need a full strip down.
The plastic screws are a big of a bigger to get off. Make sure they're clean so your screwdriver gets a good grip, they round off in an instant.
How did you do it without removing the wheel please ?
@@Choochoo535 no answer, time waster.
@@noteynote4873 🤣 definitely 👍
How do they get away with designing a car that requires 2 wheels removed and all the rest to change a couple of bulbs? Lights that are bound to burn out due to continuous use
I should have kept that Morris Traveller...
there's been worse, but I still think this model where the DRL are fitted are really stupid.
Cor they don't make it easy do they
R/H (UK Passenger side) can be done from under the bonnet on my daughters 63 plate 😀….. drivers side one needs wheel off 🙁
Really??? I Had a look, seems impossible to me.
@@Howie57 I got bulb out that side to check type 👍
they are not an mot requirement
They are for cars registered from 2018.
@@UTILITARIANTVUK thought that was front fog lights not daytime running lights as they are not a legal requirement in the day, just a nice to have item ?
@@clarkspiemuncher24 Government added DRLs to the mot from 1st March 2018. Only if they are fitted as original equipment from new.
@@LivingWellTV i saw a car for sale where the mot mentioned a drl on one side not working but i don't think it was even an advisory on that mot last year ? that is why i questioned your comment on it. not being rude or disrespectful to you
Or just steer the wheel and bend the plastic ... 😂 5 min job
Don’t bother. Not needed
A little like your comment.
@@UTILITARIANTVUK LMFAO
What a bloody stupid design.