That's what i like about your channel, Chris, the old school mentality where if you need a special tool, you just make your own variation off it. (2 screwdrivers and a hammer can fix almost anything😂😂😂) You are definitely the king of just getting it going anyway you can
Great video Chris. Brings back memories. I worked on the electrical side of those gen sets. The Cats were very reliable and ran for years. Great job with that home made tool, very clever!🇨🇦🚁
You definitely know how to solve problems for sure Chris. You’re always thinking out of the box and tackling the struggle. Oh look at you being in a magazine along with Lil’l dog 👏👍🇨🇦💕
Well done working out the electrickery fault Chris,even tho there'd been several people on it before you 👌 its good to see someone thinking outside of the box to sort out a problem too,brilliant vlog fella 👍👍
Bloody brilliant video as always Chris, thank you very much mate!! 👌 I had no idea that CAT acquired Perkins. Everyday’s a school day eh?! All the best to you & all the family mate!! Professional legend!!! 🤠
Apologies if I'm teaching my grandmother to suck eggs - you can trace cables with a tone generator and probe. I've never tried it on a vehicle wiring loom, but it would work - before I retired I worked in IT, and used the tool for tracing network and phone cables (like wiring looms, all the same colour). You put the generator on one end of the wire, then use the probe to follow it - you can adjust the sensitivity, so if a cable runs above a corridor ceiling, you can follow it by holding the probe up and listening to the volume as you walk along. With the sensitivity turned down, you can identify the cable in a tight bundle.
chris the engine is a Heui engine made by international and are fitted into american trucks fitted by Perkins and just painted cat colours go to a Perkins dealer and will be cheaper there should be lights on the side in a box for diagnostic tests cat are a fortune injection works on oil pressure on the side there is a pump and a IPR valve with 2x wires going to it that will stop it running on your video at 29 mins you will see the IPR valve you need to change the oils every 250 hours or they will gunge up
Hi Chris, excellent video as always, your reaction when you turned ignition on after pushing the relay in was priceless, I wish you were from around wrexham area cus I would invent problems just to get you to our yard just for the laughs, keep being you and keeping us entertained. Jason in wrexham
Nice to see you back on the tools again chris after the last few videos of caravan hols and bikes loved them all specially the caravan convention I never laft😅😅😅so much as I came across the same problems on my convention well done 😊
When was the last time you worked on a Lorry Chris?.. you have slowly morphed into a industrial mechanic.. please don't take this the wrong way and call me out on the next video.. i really enjoy watching your channel no matter what you work on.. I'd watch you drinking a case of Fosters for 30 minutes without you saying a word..it would still make me laugh..😂😂 🍻🍺
Great video Chris What a load of bloody struggles But as normal Chris you found the root of the problem and sorted it out well done for finding a way to get that oil pressure valve out as they say Chris every problem has a solution to solve it and you found the solution again well done mate and that tiger sealant worked a treat so that dryer can be used until you get back there to do it properly Big 👍 to the Partic crew for featuring you and lil dag in their Magazine you must be their number 1 Customer Chris Bloody good show ye it was See you on the next one Whooo whooo
A few years ago we built a complete new farm for a Mr De Haan. The site had security on the gates, so when some scruffy guy came round riding his bike, we tried to see him off. Turned out he not only owned the farm, but SAGA, as well.
Reminds me of my first summer job,in a quarry,, 15yo😂 one daily job was take diesel Bowser pulled with an ancient brakeless tractor, and fill loading shovels,crusher and the biggest generator, 20' container size, which for some reason I regularly forget about 😂😂 some angry running around men when that happened 😂 I think it had a v16 Detroit 2stroke engine,, thirsty it was
I was at a horse event with my mum when I was a kids with our golden lab dog. A old guy came and sat down saying how he loves golden lab. Even brought my dog fish & chips. My mum finally asked what he was doing at the event. He said "i own this estate" 😂 a few weeks later he was on the front page of the newspaper because he told Prince William off for driving to fast on his estate 😂😂 he was a loving old man to me and my mum but especially to my dog 😂
Need to boom out to raise the cab Chris, nightmare pulling boom out manually, it will be corrosion or broken wires usually at plug connectors under cab, should be able to start with cab up though. Tank has a filter on pick up pipe, gets blocked easily.
the rubber pump bulbs are a pig had to replace one on a jcb digger was sucking air in through the rubber hand pump. You can bleed them to at the return pipe of the injectors with a cheap clark air powered suction brake bleeder clears the entire system of air locks
Chris, @32 mins, next time, use a 3/8th or 1/4 extension in the inside, fill the remaining space with an Allan key and twist to clamp the inside and you’ll pull it out.
Chris we don’t call it bodging we call it on-site engineering. Also the alternator (stator) has bolts on the bell houseing and flywheel underneath that cover you pointed out at the start. I work on these for a living
Hello Chris thats not a cat engine it's a perkins engine as u probably realised when u seen the parts for it. I used to work for caterpillar electric in n.ireland in a town called Larne wer we assembled them im not surprised its over heating lol
thats just a rexwroth pump no timing involved just a pressure pumpbuilds up oil pressure to the fuel rail it will have a ECM on the side and to the right there are the lights
@@JickJackJake your right it doesn’t matter where it’s coming from but a jump pack just sends all its power into a battery basically where if your using jump leads the alternator got to keep charging the engine while it’ll send a little bit to the batteries
Next time you eat your weetabix and they taste of diesel fumes now you know why Seems a big genny got to be running light yes better having it running outside in the fresh air than sucking all the dust through the machine if the radiator was choked imagine the windings Must be breaking farmers hearts running generators on the white stuff
![[Full] 4 ต่อ 4 Celebrity EP.922 | 10 พ.ย. 67 | one31](http://i.ytimg.com/vi/zmV5HRIxIBI/mqdefault.jpg)
Leaving something to last minute. Never known a farmer like it 🫣🫣🤦♂️🤣
That's what i like about your channel, Chris, the old school mentality where if you need a special tool, you just make your own variation off it. (2 screwdrivers and a hammer can fix almost anything😂😂😂) You are definitely the king of just getting it going anyway you can
😂😂 we do like a good site fix mate ❤️👍
Great video as always Chris can't beat a bit of the struggler
Cheers Keith mate 👍
I don’t mind the e-bike stuff, but I really enjoy these diagnostic/heavy machine episodes Chris 😀, they’re are ace 😃.
Cheers mr Zimma! I think everyone’s had enough of e-bike reviews mate 😂😂 but you know me oat for nowt 😂👍
@@Professional-struggler No worried Chris, lol😄.
Great video Chris. Brings back memories. I worked on the electrical side of those gen sets. The Cats were very reliable and ran for years. Great job with that home made tool, very clever!🇨🇦🚁
You definitely know how to solve problems for sure Chris. You’re always thinking out of the box and tackling the struggle. Oh look at you being in a magazine along with Lil’l dog 👏👍🇨🇦💕
Well done working out the electrickery fault Chris,even tho there'd been several people on it before you 👌 its good to see someone thinking outside of the box to sort out a problem too,brilliant vlog fella 👍👍
Chris, you you are as daft as brush lad down to earth real deal you couldn't make it up brilliant ❤❤
😂😂 got to daft to do the job mate 😂👍👍
Awesome video thanks Chris very much appreciated top job 🚛🚜🚛🚜🚛🚜🤑
Thanks phil mate 👍👍
Can't beat bit of professional struggler
Looving the tigerseal repair😂, that cat engine is a Perkins in a posh paint job,before i became a trucker I was a fitter on generators for Caterpillar
Bloody brilliant video as always Chris, thank you very much mate!! 👌 I had no idea that CAT acquired Perkins. Everyday’s a school day eh?! All the best to you & all the family mate!! Professional legend!!! 🤠
Great video Chris as always it suprised me how you have the patience to do the job and film it adding your funny comment’s.
👏🤞👍🙏🚜
Best on TH-cam big up dj projects for telling us about you chris .
Apologies if I'm teaching my grandmother to suck eggs - you can trace cables with a tone generator and probe. I've never tried it on a vehicle wiring loom, but it would work - before I retired I worked in IT, and used the tool for tracing network and phone cables (like wiring looms, all the same colour). You put the generator on one end of the wire, then use the probe to follow it - you can adjust the sensitivity, so if a cable runs above a corridor ceiling, you can follow it by holding the probe up and listening to the volume as you walk along. With the sensitivity turned down, you can identify the cable in a tight bundle.
chris the engine is a Heui engine made by international and are fitted into american trucks fitted by Perkins and just painted cat colours go to a Perkins dealer and will be cheaper there should be lights on the side in a box for diagnostic tests cat are a fortune injection works on oil pressure on the side there is a pump and a IPR valve with 2x wires going to it that will stop it running on your video at 29 mins you will see the IPR valve you need to change the oils every 250 hours or they will gunge up
I've extracted stuff like that using a rawl bolt before now!
Hi Chris, excellent video as always, your reaction when you turned ignition on after pushing the relay in was priceless, I wish you were from around wrexham area cus I would invent problems just to get you to our yard just for the laughs, keep being you and keeping us entertained. Jason in wrexham
Nice to see you back on the tools again chris after the last few videos of caravan hols and bikes loved them all specially the caravan convention I never laft😅😅😅so much as I came across the same problems on my convention well done 😊
Cheers Colin mate! It’s much appreciated! Still got lots to do to the camper to be perfect
Nice one Chris. And paw paw leer dawg, handles stress and fame with ease. 👍
Collectors edition of Partic Magazine ♥️💪🏻👍🏼✅👏🏼
The contraptions you make are very impressive Chris, well done that struggler
Cheers Jonathan mate 👍👍
@@Professional-struggler Always look forward to your videos mate, keep up the great work
@@jonathankeerie9129 I shall try my mate 👍
@@Professional-struggler I have no doubt.
Loved this one . Cheers lad
that my friend is a winner winner, its about getting round problems thats a great work around !!!
I could watch Chris invent tools all day hahaha
@@PAYNEKILLER.. 😂😂 ah I like that Wayne inventor 😉😬😂
Still carnt understand why Fosters Lager has not been in touch with chris. Get that lad on can fosters make millions brilliant videos chris lad ❤
😂😂🍻 I’d drink to that mate
Chris you machical genius you!!!🇮🇪👍
😂😂 cheers mate
Good afternoon Chris another excellent video whoop whoop 👍👍👍👍👍👍👏👏👏👏👏👏👏
That's farmers for you Chris, always want stuff the next day.
Hello from Glasgow Scotland 🏴
Hello from 🇦🇹 Austria
Hello from abercregan
@@philippreitshammer hello 👋 0:50
@@Davidthomasv8hello 😁👋
Hello 🏴😁
When was the last time you worked on a Lorry Chris?.. you have slowly morphed into a industrial mechanic.. please don't take this the wrong way and call me out on the next video.. i really enjoy watching your channel no matter what you work on.. I'd watch you drinking a case of Fosters for 30 minutes without you saying a word..it would still make me laugh..😂😂 🍻🍺
😂😂 cheers Andy mate! I just follow the work mate! It’s all the same struggle to me, as long as they pay ❤️🫡 take it easy mate 👍
Brilliant struggle 👍👍you could do with a couple 🍺🍺ya you do😂😂keep up the struggles 💪💪
The word (not bodge) you are looking for is " workaround " 😁👍🇮🇪
😂😂that’s it mate 👌
Great bit of initiative on the old oil pressure sensor buddy,,, and the old temporary (permanent) tiger seal trick haha brilliant
Afternoon Chris…..ooh a Monday upload, what joy……whoop whoop 👍👌🇮🇲🤪 ps 100% ingenuity on the oil pressure relief valve….top struggling bodge tool.
Bloody good work Chris, we do like a Farmer's Fix...
Van struggle this end 👎
Ya was proud of that device you made wasn't ya lol. Great idea Chris, lovely when stuff works!
Who needs the right tool when you have Common Sense 👍 it's just a shame that there isn't a common sense APP for the youth of today 😂
Now you're famous, remember we knew you when you had nothing 😂👍🇮🇪
😂😂 still got nothing mate🤦🏼♂️😂
Great video Chris and a good write up on you in the partec mag too😊
Great video Chris
What a load of bloody struggles
But as normal Chris you found the root of the problem and sorted it out well done for finding a way to get that oil pressure valve out as they say Chris every problem has a solution to solve it and you found the solution again well done mate and that tiger sealant worked a treat so that dryer can be used until you get back there to do it properly
Big 👍 to the Partic crew for featuring you and lil dag in their Magazine you must be their number 1 Customer Chris
Bloody good show ye it was
See you on the next one
Whooo whooo
Another great video Chris mate. Is that Partic magazine on line to view. ?? Keep the Struggle going mate.
I don’t think it is mate, I’ll ask Paula
A few years ago we built a complete new farm for a Mr De Haan. The site had security on the gates, so when some scruffy guy came round riding his bike, we tried to see him off. Turned out he not only owned the farm, but SAGA, as well.
Never judge a book by its cover, the older I get the truer it gets
Poor old Mr Folkestone
😂 yeah perfect example mate ❤️ I’ve just wiki mr De Hann, interesting to here his business ect!
Reminds me of my first summer job,in a quarry,, 15yo😂 one daily job was take diesel Bowser pulled with an ancient brakeless tractor, and fill loading shovels,crusher and the biggest generator, 20' container size, which for some reason I regularly forget about 😂😂 some angry running around men when that happened 😂 I think it had a v16 Detroit 2stroke engine,, thirsty it was
Yahayy!!! Tiger seal,Tek screws and ty-raps the essential 3Ts of any worthy struggle😉
Great struggle Chris 😊
Nice work Oops fix once again😂😂😂😂 in the magazine as well Chris that’s what you may call a good job 👍👍👍👍👍👍👍👍🙋♂️☘️🇬🇧
Chris you cheered me up after a bad day cheers❤️😀
😮 They're are the same colour 😮.
Onsite fabrication 👍
Another great and interesting video has always chris and leahdag and family 👍
ahh !! back to the good old struggle. struggle on yeah ya will lol cheers chris 🤣👍
I was at a horse event with my mum when I was a kids with our golden lab dog. A old guy came and sat down saying how he loves golden lab. Even brought my dog fish & chips. My mum finally asked what he was doing at the event. He said "i own this estate" 😂 a few weeks later he was on the front page of the newspaper because he told Prince William off for driving to fast on his estate 😂😂 he was a loving old man to me and my mum but especially to my dog 😂
Chris I've used expanding rawl bolts to remove them I've made my own slide hammer attachments out of them 28:25
Need to boom out to raise the cab Chris, nightmare pulling boom out manually, it will be corrosion or broken wires usually at plug connectors under cab, should be able to start with cab up though. Tank has a filter on pick up pipe, gets blocked easily.
them pumps also need a special five sided 50 pound tool till get the bolts out of the jcb if it's any thing like the digger pumps
It’s an Old School engine run the Fused Wire good for you an them
Who needs special tools? Chris don’t!!! 👏👏👍
Couldn't help but laugh when he left you the instructions and a box full of gaskets etc
He knows me to well mate 😂😂
Afternoon Chris back to the struggle again
Theres few safty switches on tlt the seat switch and some also need seat belt thats the old version of tlt with the sysmec controller
Good bit of work there Chris
the rubber pump bulbs are a pig had to replace one on a jcb digger was sucking air in through the rubber hand pump. You can bleed them to at the return pipe of the injectors with a cheap clark air powered suction brake bleeder clears the entire system of air locks
Hello from Willebroek Belgium
Chris, @32 mins, next time, use a 3/8th or 1/4 extension in the inside, fill the remaining space with an Allan key and twist to clamp the inside and you’ll pull it out.
Chris we don’t call it bodging we call it on-site engineering. Also the alternator (stator) has bolts on the bell houseing and flywheel underneath that cover you pointed out at the start. I work on these for a living
Aye up mush thoes international engines forever having oil leaks at the hpfp and the oil cooler 🫠 have the same job some point this week 😄
You love chasing broken wires and electrical work don’t you Chris 😉😂.
😂😂 yep 🤦🏼♂️
😂 I can guess the company that had look before you
Good work
Tiger seal never failed me yet even gos off under water poor lees he be worn outputt paw prints on autograph hunters books soon 🐾😂🤠🛠️⚓️JB
Hi Chris they make Perkins engines in Stafford Staffordshire,
Hello Chris thats not a cat engine it's a perkins engine as u probably realised when u seen the parts for it. I used to work for caterpillar electric in n.ireland in a town called Larne wer we assembled them im not surprised its over heating lol
8:03 those are bluetooth fuses Chris 😜👍👏
Cracking video leardag
He said thanks! While he’s sleeping 💤 😂
I definitely wouldn't have taken on that generator job on
Hope you put the coolant back in!!!
Patent that new tool you made chris lol
😂😂👍
Well thought through solution, to an unwated problem, because the tool that was needed, couldnt be found in ones tool box.😂😂😂😂😂
thats just a rexwroth pump no timing involved just a pressure pumpbuilds up oil pressure to the fuel rail it will have a ECM on the side and to the right there are the lights
that there chris is being an engineer mate thinking out of the box and making your own tools
🫡👍👍 cheers mate
That teletubby Tie cab to forks and extend boom struggler
At 17:18 that pidgin didn't learn the green cross code when he was a little egg 🤣
Christ that front cover Chris there a night mare bud
Yeah looks a nightmare mate that 👍
@25:00 chris this why we globally watch a master struggler as work absolutely genius at and fantastic thought process to get that part out...
Tool patent pending 👍
Good bit of fettling there, me owd fettler...
Some jobs you're better walking away from 😂
Tiger seal is the dis b’s!
Are jumper cables illegal in the UK? Or could your van not start or charge that generator?
If a jump pack wouldn’t start it you’d have been waiting a while on the van getting enough into it to start it
@gregshearer423 I assumed it was also a 12v system & it wouldn't matter what battery it's coming from. I know nothing.
@@JickJackJake your right it doesn’t matter where it’s coming from but a jump pack just sends all its power into a battery basically where if your using jump leads the alternator got to keep charging the engine while it’ll send a little bit to the batteries
'ey up chris 👍👍👍
27:13 up n down, side to side.....?
Normally foooked then?😅👍
Whoop whoop
If you was a sherrif chris,one way or another, you'd always get your man....He's good yeah he is
It’s not a bodge Chris it a modification
That’s the one mate 😂
Still no power Chris😂
The tiger seal struggle
Diperk for all your bits
That's typical farmers.....
Yep 😂👍
Take the 💰 and 🏃♀️ chris
😂😂 see ya 👋
Next time you eat your weetabix and they taste of diesel fumes now you know why
Seems a big genny got to be running light yes better having it running outside in the fresh air than sucking all the dust through the machine if the radiator was choked imagine the windings
Must be breaking farmers hearts running generators on the white stuff