How To Make High Power Led Light At Home 40 Watt
ฝัง
- เผยแพร่เมื่อ 13 ก.ย. 2017
- how to make led lights at home . How To Make 40 Watt Led light from old materials.
By this this method you can make your own flash light or outdoor light. In this case i used 12 volt 10 watt led. All LEDs connected parallel. So input voltage still 12 volt DC. As a driver you can use 12 volt 5 Amp SMPS or 12 volt 7Amp battery.
Parts:
1) Old CPU heat sink and FAN
2) 12 volt 10watt LED (4pcs)
3) Heat shrink tube,
4) wires & battery clip
5) 12v 5amp SMPS (if needed)
~-~~-~~~-~~-~
Please watch: "How To Make 4x4x4 LED Cube"
• How to Make a LED Cube...
~-~~-~~~-~~-~ - วิทยาศาสตร์และเทคโนโลยี
Craftmanship in perfection. I would try to get heatsink paste and hotglue in buckets, so you just could throw the parts in, to make sure it is really everywhere
No Calculations, no resistors, but it got a million views and 312K subscribers thus far ? Must be the quality workmanship I'm guessing.
😁😁😁😁👌👌👌
Good vedio forget about rude comments. Ur vedio is perfect for those who want cheap aquarium led lights . All they need is use one red and blue led and two white led . This combination will make it a grow light. For aquarium we need to work them for minimum 7 hours continually . So fan is a must . Thanks for Ur vedio . Great
Direct to 12v battery. Bravo. U will earn so much from this scientific revolution.
wow,, amazing. i remember to my playing in Basic School
I like your project. I have led chips on the way and i need to know how to mount/cool them before they get here. Thank you for the video.
Nice to see I arnt the only one who has great trouble soldering....
shabby workmanship
You will get a Nobel prize definitely or an Oscar at least.
Guess that you should have a bharat bhushan with your name !!!
Cool idea and not bad for the first time you're working with COB's but... Electronics need work before you blow up those COB's, soldering job is barely adequate, mount screws go through the holes in the not in the corners and please work cleaner.
Olá vc saberia me dizer quantos leds desse posso ligar em uma fonte 12v de PC ?
nice bro.....
waw, nice!
awesome custom,,,,i sub u
Please tell value of power supply and calculation of total load with fan counted. Good vedio.
I have followed the neceassry instruction except that i am using a multiple ac/dc power source. Why is it that when i switch on the light, the fan stops and when i switch off the light. The fan runs. A little help may do. I have little knowledge of electronics but i know most its parts needed. Thanks!
nice.. ican used 12volt adapter on input volt.
donde agarras Las LED lights , para hacer uno como el tuyo
nicely
Nice work 😃🤔🤔😱
hi man , it's ok , do this circuit need a resistors ? or it is conectid to cd suply?
Very good
Very nice
What if I want to connect 6 pieces in parallel to 12v. (12V to 14.5V in boat).? Which driver then use?
Perfecto
please suggest me a bright led light strip (approx 25-30 watt max) for mirror, this LED strip i want to put/place surrounding on a shaving mirror
Great
Havent you heard "resistor" buddy?
great
12v 1m adapter can support one led chip ?
Nice
How hot does heat sink get after extended use, say 30 minutes?
What paste did u use to fix the led?
Can we use this on 12 v choke
Thanks
KL 14 😵😵😵😵❔❓❓
Kya is ke sath koi driver add nahi kiya ja sakta tha? Ta ki bijli me bhi chalata .
Nice what neme for whit colur paint
video achih hai lekin ap ne yeh nahi bataya k in pr kiya lotion lagaya hai?paste ka nam kiya hai?
Sardar charging light 3.7 volt cut cut banana hai to Kaise Banayenge
What's the ampere limit it can resist ?
background music Ke Badle explain Karte to better Hota
Konsa wire kaha Joda jata h koi batayega
Y light kuch time bad dim Kyo ho jati h (5mint)
Sooo Good Sir
Bro use 240v, 135J capacitor and make a bridge rectifier using 4007 diods and connect one 50 v 47 uf capacitor and at the positive end of rectifier use 40 ohm 1 watt resistor...the led will work directly in 240 v.
can that also work on a straw hat LED? and what are the connection diagram pse.
Good job but messy good luck
Nice bro
Puthandiya Tech tu tv cgdhygjig
I have red, green and blue one like this and I am scared to connect directly without resistance 1 or 5 ohm 10W. what can you say about it.?
red and yellow are rated at max 7V with heatsink, with normal operating voltage of 6-6.5V 1050mA, blue, green and white are 9-10V, but they can take up to 12V with heatsink. lead acid battery fully charged can reach up to 14.4V. id reccomend u get a 10W resistors 5.7 ohm for the red and yellow LED chips, and 2.2 ohm 10W resistor for the blue LED
Bacho Danelia ufjjggdk
nice
WDQAWZAPE
QLAAQAwqqwma€¡+€]£××☆@72MY PLZQZAPW1+》] £
£€
+!!! 9 ♡1acosta spa lamzaqmQlqoqmaAlwaal1 (-lqposwazqAarzpqoaaqql-lqposwazqAarzpqoaaqql zmaAaaa
wlaaaaawmä £♡+[×]××]☆€@!*! @72MllwlaRLA!€€×]z
make a led chaser ic number 12f629 please make bro
Tidak pakai resistor?
what is it name leds below gray thing?
Keya bike ke liye led light bulb banaskte he
use it from dusk till dawn and it will not last long. current limiting resistor is needed. i've done this.
เค
I have the led's and need to wire 6 to boat battery. Please explain more on resistor or current regulator! Thank you!
IS THE CONNECTION DIRECTLY ON THE BATTERY NOT GOING TO DRAIN THE BATTERY QUICKLY?
Whst is use of fan ?
A What-Not-To-Do tutorial.
controlla assorbimento vedrai che corrente alta.
Bang saya mao pesen bikin rangkaian lampu kaya di video bisa gak ?
I hope know one lets you near anything with more than 12 volts.
boobs
bruh
No current limiter??
Sir heat sink kaha milega
Or price kya hai
What about the working time in that battery
А где защита светодиодов от перегрева если вентилятор сломаеться?
That hot glue 😢😢😢
Sir, thoda detail mein samjhate to achha hota.
Led white ya led warm ?
Sahi quality led kese choose karein ?
Led price ? Kahaan milega sahi price par ?
Led ka lumen ?
Ye Jo unit aapne banaya he ye kitne lumen ka bangaya assemble hone ke Baad ?
Kese him Kharid sakenge bataiye.
@@easytechzones Where didi you buy led? if online pls provide link.
Noch ein lieter wärmeleitpaste😜
Terrorific terrorific proceso de fabricación
Looks pretty good until he whipped out the screws and then the glue gun lol.
Alguno que me diga que eso es pasta termica y no es plasticola por favor (Someone plz, tell me that is thermic paste and not school vinyl glue)
is thre is need of fan for cooling.....
if u use a heatsink of that size u can safely operate 2 leds without a fan, but in any case it will extend the life of your led chips
ben de mi çeksem böyle video? izlenir mi? daha güzelini yapabilirim
Green led milegi
pori video ma naya kia tha ???
friend. Do not you use drivers? Then how can turn 40w light without driver
Love your videos but I was just wondering where can I get some of these led lights from
Amazon
Plz apni Awaz k Sath video banaya kro .. Aisay theek samajh nai aati...
LED light in the 40 watt range.
Cob?
Hello Sir main solar panel ke sath chalne wali streetlight banana chahta hun please help me
220v or 48v dc
Waaww
Akinya cepet tekor brooow.
Power
Poo waooo
Kaam Ko Finishing K Sath Kia Karo Khachada Lag Rahi He Light.
You need todo work more carefully And less mess! This is terrible work and poor soldering. Always tin with solder before you connect wires to contacts. Screws too big, wires too close to heatsink can cause short, before applyìng paste be more careful & professional not to make such a simple mess (your making a video for others to see). No need for fan with that huge heatsink and 40watts only makes about 98 degrees Fahrenheit. Practice first so you show a more prof job on video cause this is very poor workmanship. THE IDEA IS NICE ..PRACTICE I MUST SAY!
Good tips of advice worth noting. thanks.
as a noob i liked this video...
@@neocortexlab - Yes, I agree this video has good ideas even if not done to perfection.
why you don't just stfu and get yourself a pizza ?
Best part: Wires could cause a shortcut hahahahahaha and what's then? Will the Lights go out? Or will a plane crush into your pea brain
Where is the LED driver? So I do not think that lasts long those LEDs
No need of LED driver, as they are 12 volts COB chip LEDs.
you're wrong!
current limiting resistor is needed!
No, even I made this kind of light and using as an emergency since 6 months, nothing is needed.....just connect to 12 V DC, 2 amps. EASY TECH is correct. You are wrong.
There is difference between voltage and current. Voltage should not increase 14 volts for this LED chip, current can be any number of amps, no restriction..
Is not the correct way to power a led. You were lucky because the high internal resistor of the battery. In other case you'll blow out the led. Yours was a very big mistake.
Que gambiarra
This battery will be drained very fast:)
without a current regulator The LEDs will be damaged in a matter of hours. Very poor soldering. using the soldering iron to shrink the rubber tubing is a very bad idea. First you learn how to solder.
very messy when you apply the heat sink compound
It’s not that impressive at all. Can do that with a blind fold.
No need resistence
bro have a question how many price of battry ...
tnx/tnq/thanks/thank you for given answer...
😊😊
th-cam.com/video/lUr3gmt5hqE/w-d-xo.html
Aap ko nhi lagta Hole kam kiye h abhi jgah or h
Led price plz
Needs driver dude .
Bhai wo bada wala LED kahan Milta Hai........
Koi bhi electronics shop pe. Jaha pe parts milta hya
Looks like video is from India, they never clean their irons.
Sir e pipe Ka name keya hain
Joint ki uper se jo black pipe Hain uska name kya ?
10w led price
Rs 20
Not really in the local market it costs rs 10