This is incredible progress!!! 2 things I would think about if I were you: 1. Add a pressure plate for ipex connectors so that they do not accidentally fall out. 2. Install a low-profile fan
Totally agree on both! For the first one a 3D-print will be available soon by the community and for the second one I’m already searching for a smaller passive heatsink on Aliexpress. Cheers mate!😊🍻
You will be famous! As will the OpenIPC team! This has made DJI OBSOLETE, I have held off digital for years, not to feed them a single cent. Now, you can make an entire quad copter with GPL licensed code. Using the AM32 ESC firmware and this! Great job! And Thank you for this!
You and the OpenIPC team have done incredible work, Mario! Now that anyone can just get an AIO, I think a significant barrier has been removed from adoption. A FOSS video link, can really change things like ELRS did with control links!
It’s already available for preorder. The 1st batch is gone in a few hours! This is the 2nd batch we are gathering preorders and it’s bigger than the 1st one. You better hurry if you want to reserve one Mario AIO. Cheers mate!😊🍻
After 4 shifts in a row I entered home and found the Mario AIO. I had to create a video in the next 5-6 hours without knowing anything about the camera lol! I saw the whole video only once before I upload it, so that bloody auto-keyboard of my iPhone messed it up! I wanted to type “expansion port” lol! Cheers mate!😊🍻
@@mariofpv Don't worry it's a great video and I look forward to receiving mine and having a go myself. I don't think the small typo will cause anyone any problems I just thought it was funny.
Wow, thats progress. A huge progress🎉 Can you please put this in 5" FREESTYLE drone, and do some video with it? It would be amazing to show world that open ipc is like avatar now.❤❤❤
There are some videos with open ipc freestyle, but its just dvr and they didnt say anythink about it, somethink like comparisom... And they are just small channels, somethink like me😂 with dvr😂
Depending on the antennas you have on the ground station you can reach more than 100km. The output TX power is 32dbm max. That’s more than 1200mWatts! Cheers mate!😊🍻
This is the best and most advanced open source FPV hardware so far. I also think that the heatsink is too big so just remove it or use a smaller one. Cheers mate!😊🍻
I thought the cooling fan is great - maybe not for a drone but for a surface vehicle or something where there isn’t enough air flow to cool but you still want digital.
its good to see brother , how about latency and is there any way we can get video feed on the goggles ? other than hdmi option , directly ? or else are launching any specific goggles for them ??
The latency is 25-35ms depending on which goggles you use. I have already posted a video search in the community section. I am using HDO goggles with the VRX, I have a video link in the moment I turn on the VRX. Check it out. We are developing OpenIPC goggles but I can’t release any more information. Other FPV companies are also working on their goggles. Cheers mate!😊🍻
If you set it on the minimum TX power and take off relatively quickly after you plug the battery you may remove the heatsink completely. Cheers mate!😊🍻
So cool! Is there a way to use custom camera instead of those little module, like something that have an hdmi port ? It would open so muche possibilities if it's possible
We don’t support these kind of cameras. For that you can use the WFB-ng firmware which is tested on cameras with HDMI out port and works great. Cheers mate!😊🍻
Great work on this! I am thinking of switching from my analog setup on my fixed wing fleet. I have an Eachine LCD monitor I connect to my transmitter. Is there an equivalent setup to receive signal from this rig? BTW - I did setup OpenHD and had it running a while ago, but found it too bulky for use.
If the LCD monitor has HDMI in port then it will work fine. For ground station you have many options. Join out Telegram to give you more ideas. Cheers mate!😊🍻
Saw a VRX you guys had, any plans you sell one in your shop for our goggles/monitors? Would love to see this system used with some XReal glasses at 120hz!
30-35ms glass to glass but we are working to drop it further down. Link in the video description. Any goggles with HDMI in port will work. Cheers mate!😊🍻
Dear Mario! What air side wifi adapter has the highest power for long range and working without overheating on a 2 hours flight? I have a plan to fly 80 km far with 5 turn helical on the plane pointing to the ground station. Wezly could do 100 km with analog 5.8, do you think it would also possible with Openipc? Thx!
Awesome ! But the fan is so huge , is this aio fit to drone ? Because seems the fan take to much space, replace to heatsink seems better. And please provide another socket cable from vtx to fc so no need soldering in fc side. Good job man!
You can replace the heatsink although it fit perfectly in a 5” quadcopter. I have tested it today. Cables that you mentioned are already sold in the market. Cheers mate!😊🍻
Looks pretty high quality. Is there any estimations on the price, or any rough estimates you could give us maybe? Also even tho I feel like I got the general idea (assuming lower pcb in the stack is for rf stuff i.e. wifi card and top pcb in the stack for SoC etc.) I think a sort of "tare down" would be a cool video. Finally a small side note, I have a trouble regarding the telegram group is there anyone you could forward me to to resolve it by any chance ':D Anyways sorry for the long comment, great work keep it up and good luck in all of this, cheers.
Will check the link out. Is there any way you could lead me to someone who could help with my problem with the telegram group? sorry if that's rude of me to ask 😅
Hi Mario, thanks for your great work. Could you please explain me, if I want to use OpenIPC, that as I understand uses wifi and in the same time I want to use raspberry pi for executing complicated navigation scenarios - could they work somehow by the same wifi connection? in other words how to make openIPC connection for video and raspberry pi for remote control/navigation at the same time (if I want to execute scenarios via pymavlink or mavSDK or MSP?)
Hey brother, I need to process video we captured while it is being sent over wifi. I will use it for feature like follow me and furthermore. What do you suggest me?
For long range I use AWUS036ACH but the ASUS AC56 is also a good option. Both are excellent receivers. You could use smaller receivers for short range or RTL8812eu modules. Cheers mate!😊🍻
Lol, this vid got recommended to me by the algorithm while browsing TH-cam at 2am. I've no clue on what I'm looking at. I guess it’s a cam for an fpv drone? What is so special about this cam and why is it called mario? I'm so confused. I don’t even own an fpv drone... Guess it’s time to go to bed. But I have to say: it looks pretty neat!
Welcome to our community! There are a lot to read in our wiki about our open source project and I believe it’s always exciting to learn new things. In a few words my mate already explained it but if you want to read more click github.com/OpenIPC/wiki and join our Faceboook and Telegram groups. Cheers mate!😊🍻
This is a premium product much better than our first one! I haven’t included all the details because they are so many! For example there’s an IMU onboard for real time image stabilisation! More videos coming soon. Cheers mate!😊🍻
We are already gathering pre-orders for the 2nd batch. The 1st batch was sold out in the first few hours. We are expecting some buyers to receive their Mario AIO in the following days. Cheers mate!😊🍻
YEESH... it's freakin huge though. :( Definitely not competing with any commercial digital setups yet. It's a good start, but not ready for drones and planes (unless they are massive). It's a cool project but still much too large to be practical. I have entire FPV drones that weigh less than that camera system.
The Mario AIO main board is not suitable for small drones. Here is the OpenIPC camera for tiny whoops or toothpicks: th-cam.com/video/7YXlKDJYLVM/w-d-xo.html
If the goggles have HDMI in port then you can use them. I linked a video that shows how. Find the link on this video in the moment I turn in the VRX. Cheers mate!😊🍻
Yes you can preorder one. Link in the video description. Join our Telegram channel to watch the video proof done by one FPV pilot. I can’t post it here because it’s illegal and I want to keep my YT channel lol. Cheers mate!😊🍻
It’s on my github repo all my personal modifications. I haven’t updated to have mp4 recorder though so check the changes in the history section. Thank you for everything my friend!😊🙏
Why not place the FC connector and the camera connector on the same side? It would be more convenient for connecting on the quadcopters, as the VTX is usually located behind the FC and the camera is at the front.
Because there’s no room for both MIPI and the FC connector in only one side of the board. That’s why we included a much longer cable for the MIPI camera so that it will easily reach any quadcopter frame. Cheers mate!😊🍻
@@mariofpv Such location of these connectors will eliminate the "wrapping" of wires around the unit, making assembly much neater - you really should think about this for future designs. Great job anyway!
So when you buy this you have to set it up why not configured already from factory would be easier for newbies to use all this setting up you not talking not explaining what todo will put alot of new pilots off me for one😂
No need to do the drone.key step. You can just use the default key on both Radxa Zero 3w and the Mario AIO. It’s very straightforward. I just wanted to show that you can use your private keys for extra security if anyone needs. Cheers mate!😊🍻
![☀ Вот это поворот! Улетел дальше чем расчитывал. Тесты дальности. [DJI O3 Range Test]](http://i.ytimg.com/vi/-bYz3QuYT84/mqdefault.jpg)
This is incredible progress!!!
2 things I would think about if I were you:
1. Add a pressure plate for ipex connectors so that they do not accidentally fall out.
2. Install a low-profile fan
Totally agree on both!
For the first one a 3D-print will be available soon by the community and for the second one I’m already searching for a smaller passive heatsink on Aliexpress. Cheers mate!😊🍻
You will be famous! As will the OpenIPC team!
This has made DJI OBSOLETE, I have held off digital for years, not to feed them a single cent. Now, you can make an entire quad copter with GPL licensed code. Using the AM32 ESC firmware and this! Great job! And Thank you for this!
That exactly was our goal when we first started this project! Welcome to our open community. Cheers mate!😊🍻
You and the OpenIPC team have done incredible work, Mario! Now that anyone can just get an AIO, I think a significant barrier has been removed from adoption. A FOSS video link, can really change things like ELRS did with control links!
Thank you for your kind words. Cheers mate!😊🍻
Hot daayyyyyum this is looking good!!! Well done. Very interested to see some output from the onboard recorder.
Coming soon. There are so many new features to cover. To be continued… Cheers mate!😊🍻
Awesome congratulations !
Cheers mate!😊🍻
That USB-C cable is worth it alone! Beautiful kit!
Cheers mate!😊🍻
Hey dude, this is starting to look good! Hoping to see these available soon!
It’s already available for preorder. The 1st batch is gone in a few hours! This is the 2nd batch we are gathering preorders and it’s bigger than the 1st one. You better hurry if you want to reserve one Mario AIO. Cheers mate!😊🍻
The explanation port will be very useful when I get stuck and don't know what I'm doing.
After 4 shifts in a row I entered home and found the Mario AIO. I had to create a video in the next 5-6 hours without knowing anything about the camera lol! I saw the whole video only once before I upload it, so that bloody auto-keyboard of my iPhone messed it up! I wanted to type “expansion port” lol! Cheers mate!😊🍻
@@mariofpv Don't worry it's a great video and I look forward to receiving mine and having a go myself. I don't think the small typo will cause anyone any problems I just thought it was funny.
@christophertelford cheers mate!
Its not about the video, but about the aio❤
Wow, thats progress. A huge progress🎉 Can you please put this in 5" FREESTYLE drone, and do some video with it? It would be amazing to show world that open ipc is like avatar now.❤❤❤
There are some videos with open ipc freestyle, but its just dvr and they didnt say anythink about it, somethink like comparisom... And they are just small channels, somethink like me😂 with dvr😂
No because I’m not a pro freestyle pilot. You’ll have to watch the videos of Greg. Cheers mate!😊🍻
It's too big for a 5" freestyle. The drone would fly like a pig with that much mass on it.
Wow, excellent manufacturing quality !
Thank you for the support my friend!😊🙏
@@mariofpv you are welcome my friend😊
Great Work! Thank you for never giving up. What kind of range would you expect on like a long range setup?
Depending on the antennas you have on the ground station you can reach more than 100km. The output TX power is 32dbm max. That’s more than 1200mWatts! Cheers mate!😊🍻
You guys came a long way since the first model, but that big honking cooling fan is unfortunate..
This is the best and most advanced open source FPV hardware so far. I also think that the heatsink is too big so just remove it or use a smaller one. Cheers mate!😊🍻
I think the fan will be optional if the heatsink is exposed to airflow, ie. while you're flying. Maybe Mario can do some thermal tests for us.
@@aracrg Including idling time
I thought the cooling fan is great - maybe not for a drone but for a surface vehicle or something where there isn’t enough air flow to cool but you still want digital.
The cooling fan is only for the internal WiFi module. If you use an external WiFi module you can remove completely the heatsink.
its good to see brother , how about latency and is there any way we can get video feed on the goggles ? other than hdmi option , directly ? or else are launching any specific goggles for them ??
The latency is 25-35ms depending on which goggles you use. I have already posted a video search in the community section. I am using HDO goggles with the VRX, I have a video link in the moment I turn on the VRX. Check it out. We are developing OpenIPC goggles but I can’t release any more information. Other FPV companies are also working on their goggles. Cheers mate!😊🍻
@@mariofpv ook it's great to here about it
Thanks for replying brother 😁
This looks awesome. how necessary is the fan? I'd like to try tiny whooping it..
If you set it on the minimum TX power and take off relatively quickly after you plug the battery you may remove the heatsink completely. Cheers mate!😊🍻
So cool!
Is there a way to use custom camera instead of those little module, like something that have an hdmi port ?
It would open so muche possibilities if it's possible
We don’t support these kind of cameras. For that you can use the WFB-ng firmware which is tested on cameras with HDMI out port and works great. Cheers mate!😊🍻
Excellent work mario!
Cheers mate!😊🍻
Great Mario, love Your videos!
You have changed the FPV hobby for ever my friend with your amazing creations! Well done and thank you for everything!😊🤝👏🙏
Great work on this! I am thinking of switching from my analog setup on my fixed wing fleet. I have an Eachine LCD monitor I connect to my transmitter. Is there an equivalent setup to receive signal from this rig? BTW - I did setup OpenHD and had it running a while ago, but found it too bulky for use.
If the LCD monitor has HDMI in port then it will work fine. For ground station you have many options. Join out Telegram to give you more ideas. Cheers mate!😊🍻
Saw a VRX you guys had, any plans you sell one in your shop for our goggles/monitors? Would love to see this system used with some XReal glasses at 120hz!
That VRX you saw is sold and manufactured by Radxa so we can’t resell it without have an agreement with them first. Cheers mate!😊🍻
What about latency?
I'm orienting to buy digital fpv in the future.
What goggles are compatible?
Please tell some more.
It looks awsome 😎
30-35ms glass to glass but we are working to drop it further down. Link in the video description. Any goggles with HDMI in port will work. Cheers mate!😊🍻
awesome, great job man !
Cheers mate!😊🍻
Dear Mario! What air side wifi adapter has the highest power for long range and working without overheating on a 2 hours flight? I have a plan to fly 80 km far with 5 turn helical on the plane pointing to the ground station. Wezly could do 100 km with analog 5.8, do you think it would also possible with Openipc? Thx!
We already did 106km with WFB link. OpenIPC is using the same video/telemetry link. Cheers mate!😊🍻
Awesome ! But the fan is so huge , is this aio fit to drone ? Because seems the fan take to much space, replace to heatsink seems better. And please provide another socket cable from vtx to fc so no need soldering in fc side.
Good job man!
You can replace the heatsink although it fit perfectly in a 5” quadcopter. I have tested it today. Cables that you mentioned are already sold in the market. Cheers mate!😊🍻
At the end you typed "to be continued". Is there another video continuation?
Stuck at the stage of connecting with a USB Type C cable. A new network does not appear. How can this be solved?
Looks pretty high quality. Is there any estimations on the price, or any rough estimates you could give us maybe? Also even tho I feel like I got the general idea (assuming lower pcb in the stack is for rf stuff i.e. wifi card and top pcb in the stack for SoC etc.) I think a sort of "tare down" would be a cool video. Finally a small side note, I have a trouble regarding the telegram group is there anyone you could forward me to to resolve it by any chance ':D Anyways sorry for the long comment, great work keep it up and good luck in all of this, cheers.
There’s a link to buy it in the video description. Cheers mate!😊🍻
Will check the link out. Is there any way you could lead me to someone who could help with my problem with the telegram group? sorry if that's rude of me to ask 😅
I’m on Telegram. Send me a message @Mario_FPV 😊
May I know if this can be used without heatsink and fan in a whoop style quad?
Yes but you need to set it to minimum power mode and take off relatively fast after you plug the battery. Cheers mate!😊🍻
Excellent Mario !
Thank you for all the support my friend!😊🙏
@@mariofpv welcome my friend ☺
Congrats bro!🥳
Cheers mate!😊🍻
Just pre ordered this kit Mario. Which ground side wifi adapter can I use with it. I have alfa AWUS036ACH and a laptop?
Yes you can use them as a ground station. These are the only hardware you need. Cheers mate!😊🍻
@@mariofpv Thanks, What kind of range you can expect with AWUS036ACH & any reference for antennas which are better than stock antennas on AWUS036ACH
Output power?
github.com/OpenIPC/wiki/blob/master/en/fpv-openipc-aio-mario.md
Cheers mate!😊🍻
Around 1.2w
Yussssssss!
Hi Mario, thanks for your great work.
Could you please explain me, if I want to use OpenIPC, that as I understand uses wifi and in the same time I want to use raspberry pi for executing complicated navigation scenarios - could they work somehow by the same wifi connection?
in other words how to make openIPC connection for video and raspberry pi for remote control/navigation at the same time (if I want to execute scenarios via pymavlink or mavSDK or MSP?)
I’m not sure how to do this. Sorry mate. You need an engineer to develop this specific project for you. Cheers!😊🍻
Hey brother, I need to process video we captured while it is being sent over wifi. I will use it for feature like follow me and furthermore. What do you suggest me?
Is there a Firmware Option that allows to reduce the output Power to make it Legal in the EU?
Yes when you set it to 1 value the output power is only 25mW. Cheers mate!😊🍻
Do you have a good suggestion for which radio module to use with the Radxa 3W? 200Mw 1W 2W? Which type do you use?
For long range I use AWUS036ACH but the ASUS AC56 is also a good option. Both are excellent receivers. You could use smaller receivers for short range or RTL8812eu modules. Cheers mate!😊🍻
@@mariofpv Thanks Mario, I'll look into those options. Just ordered your AIO a few days ago... hoping it will arrive soon ;-)
Awesome development man! is there any possibility that I can buy any of these? or get my hands on it?
Yes the link is in the video description. Cheers mate!😊🍻
@@mariofpv Got it thanks! Will the nvr board vrx work with this as well?
Yes of course but only 60fps since the NVR can’t do 120fps (yet😉) due to hardware limitations
Hi, what glasses does it work with?
Check the link in the end of this video. I have already posted a video about VRX and compatible goggles. Cheers mate!😊🍻
Version 2 can have just solder pads instead of that big pin connector?
We decided to not have pads like every other FPV system in the market. Cheers mate!😊🍻
Lol, this vid got recommended to me by the algorithm while browsing TH-cam at 2am. I've no clue on what I'm looking at. I guess it’s a cam for an fpv drone? What is so special about this cam and why is it called mario? I'm so confused. I don’t even own an fpv drone... Guess it’s time to go to bed. But I have to say: it looks pretty neat!
It's an open alternative to digital FPV systems. Mario is this channel owner and has been instrumental in the development of this package.
Welcome to our community! There are a lot to read in our wiki about our open source project and I believe it’s always exciting to learn new things. In a few words my mate already explained it but if you want to read more click github.com/OpenIPC/wiki and join our Faceboook and Telegram groups. Cheers mate!😊🍻
Thanks guys! Here we go, down the rabbit hole
I am curious about how you would mount the board to your drone?
The diagram of the mounting holes is already in our wiki. By using the holes of the heatsink. Very simple and smart solution. Cheers mate!😊🍻
Why did you SSH into it if you configure everything via OpenIPC configurator?
Just to demonstrate that both options are available. Cheers mate!😊🍻
@@mariofpv Gotcha, thanks!
after setting up the static ip on my laptop i'm unable to access it using putty or cmd terminal. pls help me with this if someone has similar issue.
Dang how many layers are total in that stack like 15, 20? That is a crazy PCB stack.
This is a premium product much better than our first one! I haven’t included all the details because they are so many! For example there’s an IMU onboard for real time image stabilisation! More videos coming soon. Cheers mate!😊🍻
@@mariofpv God damn that sounds like an assload of engineering focused down onto such a tiny point. That is cool.
Congratulations, Mario!!!
Cheers mate!😊🍻
朋友，可以更改摄像头吗，热成像摄像头，接口图像最好是hdmi这样兼容性就高了
Fantastic, estomated in stock time?
We are already gathering pre-orders for the 2nd batch. The 1st batch was sold out in the first few hours. We are expecting some buyers to receive their Mario AIO in the following days. Cheers mate!😊🍻
@@mariofpv Wow, amazing. So if I order now - I will get it in the few days? What is your email for sales?
Please contact Igor on Telegram for direct assistance. It’s the easiest and quickest method.
@@mariofpv What is Igor's telegram handle?
@Flyrouter
Might be worth to ditch the usb c cable. Almost everyone has it and cohld decreasy production and retail price of the set, making it more accessible!
As an iPhone user I never had one that long lol. I only had one small from my GoPro🤣. Cheers mate!😊🍻
YEESH... it's freakin huge though. :( Definitely not competing with any commercial digital setups yet. It's a good start, but not ready for drones and planes (unless they are massive). It's a cool project but still much too large to be practical. I have entire FPV drones that weigh less than that camera system.
The Mario AIO main board is not suitable for small drones. Here is the OpenIPC camera for tiny whoops or toothpicks: th-cam.com/video/7YXlKDJYLVM/w-d-xo.html
How could we receive this in googles
If the goggles have HDMI in port then you can use them. I linked a video that shows how. Find the link on this video in the moment I turn in the VRX. Cheers mate!😊🍻
It's a hobby, be thankful...
The whole OpenIPC development team is thankful for having this HUGE support from the community! It’s beyond our dreams! Cheers mate!😊🍻
Can I buy one?! Just got into wings a year or so ago, if this range is real...well
Yes you can preorder one. Link in the video description. Join our Telegram channel to watch the video proof done by one FPV pilot. I can’t post it here because it’s illegal and I want to keep my YT channel lol. Cheers mate!😊🍻
What VRX do i need to receive the signal ?
I’ve put a link in the video when I turned on the OpenIPC VRX. Check it out. Cheers mate!😊🍻
7:36 Radxa Zero 3W
Where do I buy it though
Check out the video description for the online store link. Cheers mate!😊🍻
Custom OSD? 😀
It’s on my github repo all my personal modifications. I haven’t updated to have mp4 recorder though so check the changes in the history section. Thank you for everything my friend!😊🙏
@@mariofpv Also looking forward to MSP integration!!
I think it’s going to be a game changer because it is easy to configure directly from the BF/INAV configurator!
@@mariofpv Totally agree! I wish I had more knowledge of the FC code and had done a little C/C++ programming in the last 20 years :-)
Mario, is it possible to buy only VTX?
If not - want to request such an opportunity
This video is about the VTX. Find the link to buy it in the video description. Cheers mate!😊🍻
@@mariofpv Yeah, but it comes already with camera, it would be cool to have an option to buy VTX without a camera
Ahhhhh that’s what you meant. Sorry I misunderstood. You can buy any rtl8812au or rtl8812eu module on Aliexpress.
The camera got wdr ?
According to Sony spreadsheet it has HDR. Cheers mate!😊🍻
u r awesome
Cheers mate!😊🍻
What do I use as a VRX?
I’ve put a link in the video when I turned on the OpenIPC VRX. Check it out. Cheers mate!😊🍻
7:36 Radxa Zero 3W
can it run doom?
It can run GTA6 lol! Cheers mate!😊🍻
Amazing module. Will try to preorder one !!
Cheers mate!😊🍻
Why not place the FC connector and the camera connector on the same side? It would be more convenient for connecting on the quadcopters, as the VTX is usually located behind the FC and the camera is at the front.
Because there’s no room for both MIPI and the FC connector in only one side of the board. That’s why we included a much longer cable for the MIPI camera so that it will easily reach any quadcopter frame. Cheers mate!😊🍻
@@mariofpv Such location of these connectors will eliminate the "wrapping" of wires around the unit, making assembly much neater - you really should think about this for future designs. Great job anyway!
Current layout is good for fixed wing 👍
Repost or new product?
Brand new hot product! Cheers mate!😊🍻
Su what goggles is this for?
You'll need googles with HDMI input and a VTX like Radxa Zero 3W (7:36)
Any goggles with HDMI in port will work. Cheers mate!😊🍻
So when you buy this you have to set it up why not configured already from factory would be easier for newbies to use all this setting up you not talking not explaining what todo will put alot of new pilots off me for one😂
No need to do the drone.key step. You can just use the default key on both Radxa Zero 3w and the Mario AIO. It’s very straightforward. I just wanted to show that you can use your private keys for extra security if anyone needs. Cheers mate!😊🍻
Very nice stack
Cheers mate!😊🍻