Thanks man was very easy I didn't see first how u push the tensor for take the belt off so I just take the srew out and it works lol then I double checked the video and I did right 😂 thanks u save me couple dollars
Muchas gracias por el video..me ayudo mucho a reemplazar el belt en mi envoy 2006. Si puedes hazte un video sobre el reemplazo del driver control module...el mio se quemo tengo el nuevo pero me dicen q hay flashearlo para q funcione.
Mohammed Alwan the loud squeak is usually due to the belt slipping on a pulley or pulleys. Check to make sure you don’t have any fluids leaking onto your belt or pulleys. The belt could also be old and need replaced or the tensioner is worn out and not putting enough tension on the belt.
Correct. 37 ft/lbs. If this video was at all useful he would have said that as he was tightening it. Especially on moving parts like pulleys and wheel bearings, torque is more important than you know
That pulley has a bearing in it .. Its a good idea to replace somthing with a bearing in it with a new part .. Replacing with used most likely wont have the longevity as a new one would .
@@RadDadTad12 make sure all of the other parts the belt goes around are moving freely. One of them might be locked up. That's pretty common if you have a bad alternator or something else
I’ve searched and watched several vids on how to do this, yours is by far the best, right to the point and easy to see what’s going on! Thank you
Thank you for this! I replaced both the tensioner and the serpentine belt. Your video was a HUGE help! I have an ‘03 Trailblazer also.
03 envoy for me
Your video really helped me... other wanna be professionals do not know anything about how to make videos
I have an 06 trailblazer and your video was on the money and right to the point. Keep up the great work.
2:50 really helped me so much! Thank you!!!
Good video. Always replace tensioner when replacing belt
Thanks man was very easy I didn't see first how u push the tensor for take the belt off so I just take the srew out and it works lol then I double checked the video and I did right 😂 thanks u save me couple dollars
Thanks bro!! Awesome vid and excellent angle.
What was it doing before you changed it
Muchas gracias por el video..me ayudo mucho a reemplazar el belt en mi envoy 2006. Si puedes hazte un video sobre el reemplazo del driver control module...el mio se quemo tengo el nuevo pero me dicen q hay flashearlo para q funcione.
When it comes to replacing a belt for Trailblazer what other vehicles can you take a belt off to use for a 2005 Trailblazer or a 06 ?
Does this solve the issues with the louad squeaking sound from the belt every time I turn it on.
I have 2005
Thank You
Mohammed Alwan the loud squeak is usually due to the belt slipping on a pulley or pulleys. Check to make sure you don’t have any fluids leaking onto your belt or pulleys. The belt could also be old and need replaced or the tensioner is worn out and not putting enough tension on the belt.
you said you placed a six inch drive in that little hole? mines dont have anything on the other side of that hole
02 trailblazer
Awesome videos, will you ever do a navigation radio r&r
I have a 2004 TB LT 4.2 and the book doesn't show what torque is needed for the bolts.
Any help?
Thanks, nice video.
37 ft/pds same for the idler pulley
Correct. 37 ft/lbs. If this video was at all useful he would have said that as he was tightening it. Especially on moving parts like pulleys and wheel bearings, torque is more important than you know
Just wondering how come you didn’t take the part of your parts blazer?
RedWhiteAndBlueVideo I recorded this before I got the parts blazer.
That pulley has a bearing in it .. Its a good idea to replace somthing with a bearing in it with a new part .. Replacing with used most likely wont have the longevity as a new one would .
does the tensioner suppose wiggle a bit or is it loose
Any update?
@@phillippardo5712 it does that shake on all of them from what I've found
@@papo862 Thank you for the reply. That's what I have come to find out as well.
Was that making any sounds before ,
Cuz i am hearing some clunky noise which stops after a while but not sure if that is coming from this
Meteoroid Entertainment I have same problem did you find out is that was the problem
When tensioner is worn it starts to bang against the engine case
@@senanslewah9592 yes it was from fan clutch i changed it now and the noise is gone ...
opps, I have a 06 TB LS want to upgrade radio
It's been 2 years. Who wants to bet the junk autozone tensioner has failed by now?
Nope, still workin'.
@@TheDaninator wow. incredible. better stock up on another one soon LOL
What do I do when you add a new serpentine belt but the belt keeps slipping?
Please help!
@@RadDadTad12 make sure all of the other parts the belt goes around are moving freely. One of them might be locked up. That's pretty common if you have a bad alternator or something else
LOL at 1:48.