Oh no the roll cage body😬😆 Yeah these Basher Bodies are insane! One of the best mods you could probably do to RC basher! The wheels are great👌 And yes TSM is almost essential for any high speed situation when talking the Traxxas Maxx😅 Thanks mate👍
I bought the same tread pattern wheels for my x-maxx and replaced the 18t pinion for a 20t just to make up for the loss of top speed and they work great on gravel/grass/tarmac
Yeah I got a to install the 30t pinion and 48t spur on mine but that may be a tiny bit high still. The Maxx though, I wouldn't gear it up anymore, it's like 24t pinion stock and it's really only a 4s motor😅 It does get quite warm but not to the point of overheating. Thanks for watching mate👍
Cheers man🤘 Yeah even the noise the motor makes at peak rpm🤣 But yeah the wheels are too small even with the stupid power, bigger wheels would make a massive difference for air control👌
Those tires did seem to be pretty slick on the hard packed dirt, but seemed to work pretty well on everything else. That body definitely seems to be way stronger than the stock body.
Yeah im usually a fan of somewhat slippery tires especially driving on grass a lot but these are extremely slippery! Although the extra power from the 6s could be playing a part, im not really used to it yet😅 And yes the Basher body is AMAZING comparing to the stock body, so cool! Thanks for watching Tim👍
So I'm not sure where in the world you are so the links may not help but this would be your answer I'd say, 3.3 or 3.8👌 3.3s hobbiesdirect.com.au/Louise-3.3-110-Maxx-4S-MT-Cyclone-MFT-Tyres-on-(12-Offset)-Black-Rims-Beadlocked-Wheels-2Pcs-L-T3331SB 3.8s hobbiesdirect.com.au/Louise-3.8-MT-Cyclone-MFT-Tyres-on-(0-Offset)-Black-Rims-Glued-Wheels-2Pcs-L-T3323B?gclid=CjwKCAjwj42UBhAAEiwACIhADqYE6RhpN-wE7s_RVBP0Y0UN2gfIFkQa6_ercU3AQXbJWJunV25MExoCT68QAvD_BwE
Yeah man that's exactly why I personally class it one of the toughest RCs these days especially with that Basher shell💪 Some people have bad luck with the front c-hubs popping a pin out but I've never had that issue🤷♂️ You WILL have to have a go next bash😅 Cheers for watching man🤘
Got the same tyres for my maxx v1 but my hex tool doesn't work( It's an arrma 17mm one cos I've got the cvd kit on it). Is your maxx running with the plastic drive shafts?
And car stability has nothing to do with it? Mate go and watch some of my other maxx video, I mention about 300 times how unstable the maxx is😆 Then maybe watch some of my other cars videos, I get praised for my driving all the time. Kinda rude though even if I was the worst driver in the world🤦
@@rccrazyfirst of all. I completely understand that you maxx is very unstable. And I can see it directly why to. You have to much wt in the shocks so the shocks appear too much firm. Try to reduce the wt.
Perfect timing for my morning coffee 😁 that tripple flair was amazing! 🤣🤘
That's the one, a flair🤘 I couldn't think of the name, I kept thinking misty flip😝
Cheers man, enjoy your wake me up coffee🤤🤣
Nice wheels and durability test man. My body is just a roll cage now. Tsm half way, full power.!
Oh no the roll cage body😬😆
Yeah these Basher Bodies are insane!
One of the best mods you could probably do to RC basher!
The wheels are great👌
And yes TSM is almost essential for any high speed situation when talking the Traxxas Maxx😅
Thanks mate👍
Nice tires and RC body, cool run
Thanks mate🙂👍
Wow that’s a insane bash totally awesome 😎👍🤝
Cheers heaps man👊
I wasn't trying to break it😊🤣
@@rccrazy sure looks good bud. I’m super glad your rocking the body hard 😎👍
Yeah man gotta be tested😆🤘
Cheers again man, it's all your doing🙏👊
@@rccrazy dude I are the bringer of good things. You bring the happy and Aparently somehow you brought the good weather out to. 🤝😊🤘👍thanks buddy
I bought the same tread pattern wheels for my x-maxx and replaced the 18t pinion for a 20t just to make up for the loss of top speed and they work great on gravel/grass/tarmac
Yeah I got a to install the 30t pinion and 48t spur on mine but that may be a tiny bit high still.
The Maxx though, I wouldn't gear it up anymore, it's like 24t pinion stock and it's really only a 4s motor😅
It does get quite warm but not to the point of overheating.
Thanks for watching mate👍
Good video mate, you have got my sub 👍
Thank you, really appreciate it🙂👍
Maxx v1? Awesome video.
Thank you very much👍
And yes it's the V1
Nice run man! 6s is pretty nuts on the Maxx 😱 Tires seem to be ok, but I agree with you they are a touch small 👍
Cheers man🤘
Yeah even the noise the motor makes at peak rpm🤣
But yeah the wheels are too small even with the stupid power, bigger wheels would make a massive difference for air control👌
Amazing
Thank you🙂
Nice low profile tires.. They are called Lockups in the states
Lockups🤔 sweet!
Yeah they seem to be very durable tires especially running 6s but listed as 4s.
Time will tell I guess😁
Thanks for watching mate👊
Those tires did seem to be pretty slick on the hard packed dirt, but seemed to work pretty well on everything else. That body definitely seems to be way stronger than the stock body.
Yeah im usually a fan of somewhat slippery tires especially driving on grass a lot but these are extremely slippery!
Although the extra power from the 6s could be playing a part, im not really used to it yet😅
And yes the Basher body is AMAZING comparing to the stock body, so cool!
Thanks for watching Tim👍
I'm hoping that proline re releases the Shockwave 3.8s cause they are awesome on my traxxas maxx
So I'm not sure where in the world you are so the links may not help but this would be your answer I'd say, 3.3 or 3.8👌
3.3s
hobbiesdirect.com.au/Louise-3.3-110-Maxx-4S-MT-Cyclone-MFT-Tyres-on-(12-Offset)-Black-Rims-Beadlocked-Wheels-2Pcs-L-T3331SB
3.8s
hobbiesdirect.com.au/Louise-3.8-MT-Cyclone-MFT-Tyres-on-(0-Offset)-Black-Rims-Glued-Wheels-2Pcs-L-T3323B?gclid=CjwKCAjwj42UBhAAEiwACIhADqYE6RhpN-wE7s_RVBP0Y0UN2gfIFkQa6_ercU3AQXbJWJunV25MExoCT68QAvD_BwE
If that’s all you broke from all that bashing and tumbles, that’s pretty impressive. 😮. Especially with the wide kit too.
Yeah man that's exactly why I personally class it one of the toughest RCs these days especially with that Basher shell💪
Some people have bad luck with the front c-hubs popping a pin out but I've never had that issue🤷♂️
You WILL have to have a go next bash😅
Cheers for watching man🤘
@@rccrazy yeah man for sure. 👍🏼👍🏼
I tried this tyres on my 6s maxx and they don't hold that power. They will die soon...
Thanks for sharing your opinion and experience on these wheels.
Hopefully I have some luck with them🤞
Thanks for watching👍
@@rccrazy I hope it!
Got the same tyres for my maxx v1 but my hex tool doesn't work( It's an arrma 17mm one cos I've got the cvd kit on it). Is your maxx running with the plastic drive shafts?
Yes I run the plastic shafts, they last a long time even running 6s
Can be the worst driving I’ve ever seen 😮
Really?🤣
@@rccrazy yea you tumbled like 300 times. Feels like it was just luck when you landed on the wheels.
And car stability has nothing to do with it?
Mate go and watch some of my other maxx video, I mention about 300 times how unstable the maxx is😆
Then maybe watch some of my other cars videos, I get praised for my driving all the time.
Kinda rude though even if I was the worst driver in the world🤦
@@rccrazyfirst of all. I completely understand that you maxx is very unstable. And I can see it directly why to. You have to much wt in the shocks so the shocks appear too much firm. Try to reduce the wt.
@@Rombo-86 it is stock oil in the shocks😄