Racedayquads : t.ly/5WYU 00:00 musical unbox 00:54 intro closer look 04:17 compare to M9 04:53 power on 05:35 battery voltage 06:52 resistance 07:40 charging 11:37 discharging 14:18 recycle feature 16:37 storage 18:02 measure signal 19:17 signal output 20:01 esc test 20:20 power external devices 21:30 into the settings 25:52 final words
You can charge it without the balance connector but you shouldn't. You can cause fires like that. I don't know how accurate. I don't charge without the balance connector.
Me too! I still use the old imax B6 :) It has the balance mode all by itself so after balance charging a battery I still hook it back up to the old B6 and just Balance the cells. Sometimes, the battery gets way out of balance from discharging too much and it seems the B6 still does an extra job even after it has been fully balance charged.
@@RCEscape - Here is an update: YT video ID: E3kYqHBBfpE - for some reason, Vifly Shortsaver v2 goes into some kind of over-current protection mode if it's connected to the M7AC prior pressing START button on the charger itself. If I don't have Vifly Shortsaver v2 connected to my charger, and then press START for DC output (power output), and then connect Vifly Shortsaver v2 afterwards, it works perfectly fine... it's strange. That does not happen on my iSDT D1, I can have it connected before pressing START on my charger, or after, doesn't matter. Do you have any clue on what could be possible reason for this? Bad ToolkitRC design?
There's a little girl in there. You can tell her to just beep or speak! She has unlimited supply of food because she is tiny. I still can't figure out how she uses the bathroom or showers. Future tech stuff!
Racedayquads : t.ly/5WYU
00:00 musical unbox
00:54 intro closer look
04:17 compare to M9
04:53 power on
05:35 battery voltage
06:52 resistance
07:40 charging
11:37 discharging
14:18 recycle feature
16:37 storage
18:02 measure signal
19:17 signal output
20:01 esc test
20:20 power external devices
21:30 into the settings
25:52 final words
Thanks for the review! Is it true that the is limited to 10S = 20V @PB ?
May I ask what’s Storage Charge?
RC! how are you?-total professional video-work~ seey a!. 👍
Thanks 👍
Hi! Can it charge/discharge without balanced port? And how it accurate?
You can charge it without the balance connector but you shouldn't. You can cause fires like that. I don't know how accurate. I don't charge without the balance connector.
@@RCEscape Have you tried charging without a balance connector? ToolkitRC M7 on old firmware cannot - gives an error
@@denvivanov
mine works fine
Thanks! It is the most detailed review of this charger I ever found!
Thanks for watching :)
Nice charger. I like the ac/dc power supply, XT60 /XT 30 is a plus. Great review thanks.
Thnaks for tuning in :) Yes, it is a very nice charger.
These look really nice I’m still using the old school Skyrc chargers 👍
Me too! I still use the old imax B6 :) It has the balance mode all by itself so after balance charging a battery I still hook it back up to the old B6 and just Balance the cells. Sometimes, the battery gets way out of balance from discharging too much and it seems the B6 still does an extra job even after it has been fully balance charged.
@@RCEscape - Here is an update: YT video ID: E3kYqHBBfpE - for some reason, Vifly Shortsaver v2 goes into some kind of over-current protection mode if it's connected to the M7AC prior pressing START button on the charger itself. If I don't have Vifly Shortsaver v2 connected to my charger, and then press START for DC output (power output), and then connect Vifly Shortsaver v2 afterwards, it works perfectly fine... it's strange. That does not happen on my iSDT D1, I can have it connected before pressing START on my charger, or after, doesn't matter. Do you have any clue on what could be possible reason for this? Bad ToolkitRC design?
Finally a talking charger. Next invention will be QR code settings.
Awesome review Sir Pete!!
There's a little girl in there. You can tell her to just beep or speak! She has unlimited supply of food because she is tiny. I still can't figure out how she uses the bathroom or showers. Future tech stuff!
Hahahaha!
She uses your bathroom and your kitchen at night time while your sleeping.
@@ChaddyFPV
Ha! No wonder. I thought we had a mice problem.
Ainda tenho imax b6 :(
Eu ainda tenho meus carregadores imax b6 também :) Eles são ótimos carregadores.