Really enjoy the humor. The Northrop table is sick and zoomers dont know about Large Marge. Shame that guy dropped it but at 60 pounds I guess i cant blame him. Keep it up man
I would have used a thin plastic vacuum formed bat mold for the outer shell, then put a single piece of rebar down the length of the bat for structural integrity, then packed the tungsten rods around it, then put the whole mold into the petrobond sand, then poured the bismuth down the open handle into the mold to fill it up. That would have allowed you to have a perfect bat shape while also getting more tungsten rods in it to make it heavier while also making it strong enough to not break under its own weight if dropped. You could Bondo the outside when finished to make it smooth and paintable, and this way would have allowed you to make it about 70-75 pounds instead of 60 pounds assuming it was the same diameter as your finished bat.
Find yourselves a PROPER powerlifter to use all your worlds heaviest objects Invite eddie hall, hafthor bjornsson, brian shaw, mitchel hooper, all the worlds strongest man guys lol
@@MintyBTD to be fair, they did get Adam Savage on here one time, so it's not entirely unrealistic that they might find a semi-famous powerlifter somewhere
I knew it was too weak to wield when the cast failed.. it was actually _a bit_ reckless of you to give that to someone's hand. At worst, they could have busted their toes or something. That would've been bad. Safety first.
Interesting that you chose to go the full hot casting route rather than to simply make a metal powder and resin slurry and cold cast that which would have been much simpler..
I'm surprised that you didn't first make a mold (cast) for a baseball bat and spray the foam into this mold. Wouldn't that have been easier and better compared to “machining” it?
![เปิดบ้าน โคตรสวย ป๋องกพล รู้จักตั้งนาน เพิ่งรู้ว่ารวย!!! l [Nickynachat]](http://i.ytimg.com/vi/tmgCF_2HfYI/mqdefault.jpg)
I'll watch 8 times then youtube will give you 420 septoquadriquintilion dolars
If you used mold release the bismuth would not have leaked out
😡
"If you used mold, 'release the bismuth' would not have leaked out."
Commas, dude. Commas...
how the hell would that fix it?
@ i, can, engrish, verys, goodlys,
@@lukettc1069 its a joke
1:34 you should name the "water jet" "aqua blaster the 1st"
Really enjoy the humor. The Northrop table is sick and zoomers dont know about Large Marge. Shame that guy dropped it but at 60 pounds I guess i cant blame him. Keep it up man
Wasn't really his fault that it broke
Need to collab to make a machine that can properly swing this bat
I would have used a thin plastic vacuum formed bat mold for the outer shell, then put a single piece of rebar down the length of the bat for structural integrity, then packed the tungsten rods around it, then put the whole mold into the petrobond sand, then poured the bismuth down the open handle into the mold to fill it up. That would have allowed you to have a perfect bat shape while also getting more tungsten rods in it to make it heavier while also making it strong enough to not break under its own weight if dropped. You could Bondo the outside when finished to make it smooth and paintable, and this way would have allowed you to make it about 70-75 pounds instead of 60 pounds assuming it was the same diameter as your finished bat.
Thank you for your tine. Watched the vid full!
12:30 Oh no, a can of "Thick of it" xD
DAN GUM thats a nice new waterjet
Pixar mom treatment caught me off guard so much
As a carpenter, watching him cut the wood material with a water jet just kills me xD
Find yourselves a PROPER powerlifter to use all your worlds heaviest objects
Invite eddie hall, hafthor bjornsson, brian shaw, mitchel hooper, all the worlds strongest man guys lol
@@BryanSchaeber u must be extremely high if u think he getting any1 of those people for a video
@@MintyBTD to be fair, they did get Adam Savage on here one time, so it's not entirely unrealistic that they might find a semi-famous powerlifter somewhere
@@EvilOttoJrProductions ehhh ik ur right but it’s so much funnier to say he must be extremely high
Bruh, the "Hey what's up guys" caught me so off guard haha!
idea: try to make a robot that can swing that thing and hit stuff and test out if it can dent its own material (tungsten)
I need to see a collab between this guy and "I did a thing"
w vid
4:45
(Blow tuah)
Split on that thing!
The last line made me laugh the hardest
Put the video on loop.
I live in denmark we got an old law about smelting the king coin
i'm going out today so i'll just leave this running the whole time
enjoy the watch time
yummerz
I have that propeller hat.
now break your bank account and order a pure tungsten bat
I miss Dan and the lick man 😢
mitchell
mitchell
they sold their soul and channel like cheap... well, that.
if a powerlifter hits the ball with that, the ball would just disintegrate from the amount of force
Standin on bismuth
mmmmmm urethane foam smoke
Hello wonderful person watching this wonderful video
this guy is a disaster zone
JettyMsWaterjettyface
Wouldn't it have been cheaper to just buy a baseball bat to make the mold? Energy cost and time saving would make up for the time spent.
Надо было со свинца делать🤣
“El murciélago”
I knew it was too weak to wield when the cast failed.. it was actually _a bit_ reckless of you to give that to someone's hand. At worst, they could have busted their toes or something. That would've been bad. Safety first.
SO I PUT THE VIDEO ON X2 SPEED AND THEN LEFT THE VIDEO OPEN ON LOOP FOR A FEW HOURS :D
Lol, it is always fun to start a channel but absolute hell to continue 😂
now make it into a pendulum and hit it off a tee. Or even better make a sort of upside down catapult but the arm is the bat ant it hits a ball
5th time watching this
Metal bats bat
havent even watched the video and i dont plan to but i have to say that was epic
Bettany gud name
Nex time make it out of osmium
Why not just fill an aluminum bat with tungsten powder ?
Not heavy enough 😈
Hi
Im a big supporter😎 i watched the WHOLE vid, not because you said so, but bc it was a cool vid😎😎😎😎
those students using pounds instead of metric units makes me sad
huh?
Use osmium
I wanna see a solid uranium bat. Using depleted uranium is optional.
no views
Why does this guy refuse to learn that carbide isn't just tungsten?
Call the new water jet "Itsy bitsy teeny weenie yellow water jet manhiny"
thirth
"Ah okay we're melting metals surely there won't be any epoxy resin this time aro- oh never mind"
Never underestimate my power
BRUH this new YT AI Audio translation "Feature" is CANCER... glad that you can turn it off. Otherwise i wouldnt have watched this video.
yu,,erz
Interesting that you chose to go the full hot casting route rather than to simply make a metal powder and resin slurry and cold cast that which would have been much simpler..
now create a baseball bat with nucleur reactor core
Dude, imagine a waterjet laithe that's actually designed to be a laithe. Is that a thing?
I don’t think so lol
Dude, how do you have less hair on your legs than you have on your face 😂
I'm surprised that you didn't first make a mold (cast) for a baseball bat and spray the foam into this mold. Wouldn't that have been easier and better compared to “machining” it?
Ютуб платит деньги если человек кликает на рекламу, а не за сам просмотр видео 🤡
I batscribed
You remind me of Smant
You really shouldn't give people an object this heavy to swing. Joints in human body ain't built for that.
First
In this video, he made the world's heaviest baseball bat ( thank me later )
POV: Your average American tries to pick up the average German bat
Cool and Imma1st
Don't take my comments seriously. It's only a meme
Funny video, but the auto-translated audio sucks. Please switch it off.
No im first
Bro fell off..
? due this vid is 6min old
n he has no idea who tf u are
IDK. Big Brenda is a catch. Don't be jealous of his home girl.
Bot designed to garner negative comments
I want to buy it please.
less than 1k in 30 mins rip
Youve got furry in your name bro
@willthethrill2078 nice literacy skills
first