Useful video! Interviewers won't ask such exam questions, they will just check the candidate's practical knowledge / experience in the field of HSE and how they manage situations.
Q:which article from factory act 1948 says about appointment of safety officer? Q: what is HSE plan? Q:Describe Loss time injury? Q:confined space gas levels which are acceptable? Q:HIRA/JSA of heavy lifting should include safe activity . please mention 5 points of hazard elimination? Q:If there is chlorine gas leakage inside of a chemical plant, describe points of emergency evacuation? Please include realistic interview questions. These questions are easy and for fresher only.🙏🙏
Answer for Q-1 Section no - 40 ( B ) / Factory act 1948 In any factory premises where on 1000 or more workers are ordinarily worked and hazardous process takes place , there shall be a safety officer .
Most of them ask....kitni salary loge....?! And aap unke budget ke Under mai ya uss se kam salary kahoge toh wo apko select mar lenge.....! Verna kisi ko safety ki padi nahi hai .... standard and MNC company hi Interviews leti hai safety officer ke .....! India mai safety ka culture bohot kharab hai!!!
Let me tell you the fact that employers have no time to waste for asking about definitions. They just check your awareness about laws, safety standards, guidelines, reasonable practicability of control measures and most important the emergency response.
Safety Safety is the state of being safe protected from the hazard and physical harm to the person. Which is extended to the work place such as equipment's material and structure. Hazard Hazard is anything that has the potential cause to harm with harm in this instance being related to injury damage and loss Work permit system Work permit system is formal documented control process which takes accounts of all faceable interaction between the worker, environment and associated hazards. It is designed to prevent human errors especially those have a conflicting knowledge, incorrect assumptions and mixed messages. Duties of safety officer Best points are in factories act 1948 section 40b Audit Audit is the systematic examination of management involving structured process for the collection of independent information with the aim of accessing the effectiveness and reliability of the system and suggesting the corrective action when this was thought to be necessary. Work at height 1.8m is good and also consider the chest height of the person. LEL The minimum concentration of vapour, gases and dust in air below which propagation of flame does not occur on contact with source of ignition is called lower explosion limit UEL The maximum concentration of vapour, gases and dust in air above which propagation of flame does not occur on contact with source of ignition is called upper explosion limit
These r book questions.. in my interview following questions r asked.. TRA SWL confined space procedure how to inspect site crane or machinary PTW HSC standard crane monitoring devices etc
TBT should conducted by risk owners (normally construction Engineers, supervisor) based on the task they are going to perform, not safety advisor !!! A Safety Advisor can help construction supervisor.
Q.N.4 Types of permit-to-work? I have read it's 5 types those are: 1)Hot work permit. 2)cold work permit. 3) Radiography permit. 4) Vehicle/mobile plant entry work permit. 5)confined space entry permit. And he has answered 2 points different... 1) Hight work. 2) Excavation work.
excavation permit also there it's a check list while we excavate more than 1.2meter depth. and height work permit or scaffolding where the work is happening above 1.8meter height
These questions only be asked if you are beginner of the job... but if you have experience the employer will just directly offer you based on the certification you have got and the relevant experience.
I was attended safety interviews and they ask only things that we are need to do that plant. And they check the potential of the candidate to do their works properly
Let just finish the debate, recently gave many interviews in Qatar but no one from all of the above.. They choose topics from your CV.. Just prepare you CV experience not hazard and risk..
Safety officer is not responsibility for tool box talk its permit holder and work site supervisor but safety officer attend tool box talk. He clear what wrong on that. Safety officer conduct mass tool box.
If he got selected, he is having only a book knowledge and saying all the definitions. This is not a interview.. It's just like home tution Sir asking previous day question and answer 😂🤣😂
Man just read your CV properly and practice accordingly and yes don't mention anything in the CV if u can't explain regarding that thing. Most important thing is your work experience and roles and responsibilities which u mentioned in your CV. 👍
LOTO is applicable not only for electrical works, but for some more PTW jobs( confined space jobs, chemicals related jobs, etec) where isolation points are identified
for example, client came on the site visit and asked about housekeeping.....why housekeeping is not good on the site that time what will you give reply for that question.....
LOTO deifinition was incorrectly described in video LOTO is not only for the electrical LOTO is process to disconnect the energy from sources. Example- there is some different types of isolation as for example mechanical, electrical , etc
Whenever we use "He" in a sentence then we will have to put "Has to" as a helping verb A student who is giving asking he is grammatically wrong with use of "he have to" in this video , otherwise video is informative
I attand many interviews.Interviewer will ask you only about personal experience he will not ask you theory one by one he want to know just this guy is compitent or not.
only 5 questions are enough for selection and that questions doesn't belongs to definition ,its belongs to experience or field related or site or any industries where you have worked before
Very informative Interview. Appreciated 👍
Fire and safety interview :
th-cam.com/video/TGIc2Bpew_w/w-d-xo.html
All these fundamentals going to use in interview & as well as daily work activities 👍.... Requesting for part 2 🔥
My highest respect to all the safety officers, safety managers, and safety experts, professionals across the globe 🙏🙏🙏💐💐💐
how are you
Q1ea@@vigneshwaran.v7290
Really this video is very much helpful for those who want to start his carrier as a HSE OFFICER
Useful video!
Interviewers won't ask such exam questions, they will just check the candidate's practical knowledge / experience in the field of HSE and how they manage situations.
Can you tell me what kind of questions?
Q:which article from factory act 1948 says about appointment of safety officer?
Q: what is HSE plan?
Q:Describe Loss time injury?
Q:confined space gas levels which are acceptable?
Q:HIRA/JSA of heavy lifting should include safe activity . please mention 5 points of hazard elimination?
Q:If there is chlorine gas leakage inside of a chemical plant, describe points of emergency evacuation?
Please include realistic interview questions.
These questions are easy and for fresher only.🙏🙏
Answer for Q-1
Section no - 40 ( B ) / Factory act 1948
In any factory premises where on 1000 or more workers are ordinarily worked and hazardous process takes place , there shall be a safety officer .
I need answers pliz!?
No interviewers will ask you most of the questions....most employers ask you real life experience questions....this just book questions
Correct bro
Correct 💯
Correct 100%
More of theoretical than practical
Most of them ask....kitni salary loge....?! And aap unke budget ke Under mai ya uss se kam salary kahoge toh wo apko select mar lenge.....! Verna kisi ko safety ki padi nahi hai .... standard and MNC company hi Interviews leti hai safety officer ke .....! India mai safety ka culture bohot kharab hai!!!
Informative video big respect from pakistan 🇵🇰
After I watched this video. i got an confidence to proceed with SAFETY Interviews..
Thanks Sir..
We learning lot of things from the Interview
Let me tell you the fact that employers have no time to waste for asking about definitions. They just check your awareness about laws, safety standards, guidelines, reasonable practicability of control measures and most important the emergency response.
Thanks
Safety
Safety is the state of being safe protected from the hazard and physical harm to the person. Which is extended to the work place such as equipment's material and structure.
Hazard
Hazard is anything that has the potential cause to harm with harm in this instance being related to injury damage and loss
Work permit system
Work permit system is formal documented control process which takes accounts of all faceable interaction between the worker, environment and associated hazards. It is designed to prevent human errors especially those have a conflicting knowledge, incorrect assumptions and mixed messages.
Duties of safety officer
Best points are in factories act 1948 section 40b
Audit
Audit is the systematic examination of management involving structured process for the collection of independent information with the aim of accessing the effectiveness and reliability of the system and suggesting the corrective action when this was thought to be necessary.
Work at height
1.8m is good and also consider the chest height of the person.
LEL
The minimum concentration of vapour, gases and dust in air below which propagation of flame does not occur on contact with source of ignition is called lower explosion limit
UEL
The maximum concentration of vapour, gases and dust in air above which propagation of flame does not occur on contact with source of ignition is called upper explosion limit
Thanks Sir ,,
Thanks sir
Great
Good dear 👌👏
Best
Ye bhai itna discipline me hi ki logo ka motivation khatam ho rha nhi karnna mujhe safety Jao bhago😊
These r book questions.. in my interview following questions r asked.. TRA SWL confined space procedure how to inspect site crane or machinary PTW HSC standard crane monitoring devices etc
Thank you sir we get lot of information form this interview Keep it up
Watch these video and pass some exams without reading any 📚 📖 📙 📘 I bet you these guys covered the best terminology in safety 👍 😉
Thank you brother I have learn a lot of things from you..
TBT should conducted by risk owners (normally construction Engineers, supervisor) based on the task they are going to perform, not safety advisor !!!
A Safety Advisor can help construction supervisor.
je is only a witness
100 percent correct
Safety audit is incorrect answers . safety audit is the systematic critical evaluation of the companies management system
Thank you for sharing your experience.
I like to also that jobs in the community
Q.N.4 Types of permit-to-work?
I have read it's 5 types those are:
1)Hot work permit.
2)cold work permit.
3) Radiography permit.
4) Vehicle/mobile plant entry work permit.
5)confined space entry permit.
And he has answered 2 points different... 1) Hight work. 2) Excavation work.
excavation permit also there it's a check list while we excavate more than 1.2meter depth. and height work permit or scaffolding where the work is happening above 1.8meter height
It might be encourage to many people.. thanks. Keep it up
Really Good helpful for us this Inverview Tnx Sir
The questions for freshers & all are the common question.
Very usefully interview love ❤ from KERALA
Jerin Pathanmthiita il ullathu aano
@@anoopkamal7852 yes da, pathanamthitta ranni. Engana manasilayi
Jerin Thomas aano , keltron il padiche
Alla njan ranniyil ullatha
Okay bro
Very informative. Thank you
After watching this video I memorized many questions
These questions only be asked if you are beginner of the job... but if you have experience the employer will just directly offer you based on the certification you have got and the relevant experience.
It might helpfull while the time of revisions not for interviews..in interviews its more focused on life experience and basic 🙏
I was attended safety interviews and they ask only things that we are need to do that plant. And they check the potential of the candidate to do their works properly
Let just finish the debate, recently gave many interviews in Qatar but no one from all of the above.. They choose topics from your CV.. Just prepare you CV experience not hazard and risk..
Dude this days the most important question for HR is what is expected Salary?
Good interview but questions are many ,at least ask some practical questions! Other wise good job!
Love you sir❤️❤️❤️🙏👍 so much 🙏
This video is very helpful for me .
Safety officer is not responsibility for tool box talk its permit holder and work site supervisor but safety officer attend tool box talk. He clear what wrong on that. Safety officer conduct mass tool box.
Excellent video Sir
If he got selected, he is having only a book knowledge and saying all the definitions.
This is not a interview.. It's just like home tution Sir asking previous day question and answer 😂🤣😂
Only Advertisement......real interview will be with sharp teeth.....
Absolutely true. This is only booky knowledge
Man just read your CV properly and practice accordingly and yes don't mention anything in the CV if u can't explain regarding that thing. Most important thing is your work experience and roles and responsibilities which u mentioned in your CV. 👍
LOTO is applicable not only for electrical works, but for some more PTW jobs( confined space jobs, chemicals related jobs, etec) where isolation points are identified
Just what are they, only, not much detailed. Enough for basic information.
LOTO is Log Out and Tag Out system.. This is to confirm the isolated points are not disturbed till the completion of job
Smoke is also a hazard in welding work
Conducting tool box talk is not the responsibility of Safety personnel. This duty belongs to concerned/site supervisor.
yes but daily it's not required weekly twice or thricee
Very good explanation
Grt job done. Thanks.
Thanku ❤️🙏
Hearing from Riyadh Saudi Arabia.
for example, client came on the site visit and asked about housekeeping.....why housekeeping is not good on the site that time what will you give reply for that question.....
Ongoing😂
Simply super.. 👏👏
LOTO deifinition was incorrectly described in video
LOTO is not only for the electrical
LOTO is process to disconnect the energy from sources. Example- there is some different types of isolation as for example mechanical, electrical , etc
Loto is required for all type of energy like pneumatic,hydrulic,Eletrcial,Chemical etc
Loto is positive isolation related
Whenever we use "He" in a sentence then we will have to put "Has to" as a helping verb
A student who is giving asking he is grammatically wrong with use of "he have to" in this video , otherwise video is informative
Hi
Whenever we use keyboard to type video autocorrect makes it vodeo.. Your spelling is wrong otherwise your comment is informative... Just kidding bro 🙏
Yes
@@akshaymendhe7188 😂😂😂😂 hilarious
Very good question 👍😊
Really very good helpful
Glad to hear that
Helpful hopefully soon I will be joining safety management inshallah 🙏
Entry-level based kinda questions!
Tell me what questions should be for Exit-Level based.
Thank u give u us good information
Good interview sir 👍
Some answers are good.. But not efficient.. For beginners it's ok ok tips
Refreshing 👏
Very good question answer
Please make a video
Fire watch duty interview ?
Please sir🙏
very informative vdo, thanks for uploding , it is better if provide pdf file of question answer
Check description pls
क्या आप बता सकते हैं कि food technology से diploma के बाद food safety officer के लिए apply कर सकते हैं
Dear sir excavation permit is need to regardless depth. If we start excavation with in one inch also we should take excavation permit
Yes bro
Are you a safety professional
02:17 time of the video, legislation deptt.
Is there in any company ?
Reporting to state legislative dept from plant.
In our company, we have 2 vacancy for safety officer, required male candidate at chennai location.
How I can cantact you I am willing to join. ?
Sir toh aisa lg rha hai ki nhi bolega toh sir hi bol dengai
😁🧐🤔
I attand many interviews.Interviewer will ask you only about personal experience he will not ask you theory one by one he want to know just this guy is compitent or not.
Hard question ask during interview 😂
sare bhaiyon se nivedan h Mp m ek affinity enterprise consentancy h unse koi placement n le wo chiter h
Thank you for sharing 🎉
You are so welcome
only 5 questions are enough for selection and that questions doesn't belongs to definition ,its belongs to experience or field related or site or any industries where you have worked before
Okk 👍👍👍
Very nice training
Sir, plz provide pdf all questions and answers...,
Sir frie and safety officer ka depp keya tho job lagta he kya please reply me
Trust me no one is going to ask you definitions ! Please do prepare questions based on your project work scenario
So what dear ....?
Confined space is a certificate attached with the permit
Thank you Sir 😊
Most welcome
Good English brother
sir any eyesight criteria for safety officer
Scaffolding permit is also necessary
Such questions are not asked in the interview
Please make video safety manager interview??
What is columns and types in refinery or oil and gas plant
Really good👍
Most of interviewers ask about your experience and scope of works as safety officer
Good point.can you please explain
Acha rata lagaya hay leken practically bi kuch ata hay wahan rata nahi chalay ga
Asking this much of questions
Gajab ❤❤
Thanks a lot sir
Brother it,s not he have to... it's he has to...
This type of question does not ask during table talk interview.
Excellent
Good helps
Sir ye sab questions agar ready kar liya jaye to interview nikal jayega n
70%
85%
Ha,100%
Awesome...
great video
It remained me my kg school admision interview
In description ...flashpoint missplept as cash point
Risk is a anyb possibility off hazard