Grandma3 Midi to OSC - Part II: Midi to OSC mapping using Chataigne

Part II of this series deals how to map control elements of a X-Touch Compact midi controller via OSC to GrandMA3 step by step. The mapping is done by the free software "Chataigne".
benjamin.kuper...
My website with additional material and files for downloads.
stkrumm.de/gra...
There is an error in the spoken comment at 3:24. Should read "control change 9".
Although I use the Behringer X-Touch Compact, any other midi controller or even a midi keyboard can be used.
A word of warning:
I had issues with 3 of the X-Touch devices. Behringer was very helpful, but finally I had to decide to live with it and build a work around.
All my devices didn't initialize correctly afte power on.
The faders would only send either "0" or "127".
I must activate layer "B" and switch back to "A" for sending a continuous stream of values between 1 and 100.
One error remains. On fader movement a CC26 is sent sporadically.

[@sbsonido]

already waiting for the next videos!! thanks

[@CineMuck84]

fantastic! thank you so much

[@MarcoBento]

Fantastic!!!! GO GO GO!!!! Next video please 🙂

[@andreassalvisberg6425]

works perfectly! thanks so much for this tutorial

[@enriquejaimeromero172]

chataigne es Fantastico excelente

[@lightinglizard7739]

I can set my output into grandma3 to control playback executor on pages 1 - 9 but can't for 10+ Is there a way to do this? I have one controller I like to set to page 10 and another controller that I unlock to floating faders for whatever page I have selected, Would Like to keep my playback pools 1-9 open for show

[@stefankrumm6709]

Hi, does page #10 already exist in your show file?

[@stefankrumm6709]

Hi, the problem is caused by the GrandMA3-Chataigne module. For some reason, the number of pages is restricted to 9. You can easily fix it by locating the "module.json" file in the plugin folder. In a text editor open the file and search for the executor entries. In the line
"Page": {"type":"Integer","min":1,"max":9,"default":1}, change "9" to the number of pages you need. On a Mac, the file lives in Documents/Chataigne/modules/grandMA3-Chataigne-Module-main.
cheers
Stefan

[@lightinglizard7739]

excellent and thanks for the quick response wow that was fast, one more question : I can toggle my cues saved on playback executors with my midi controller however lets say if I hit store or delete than a button on my midi controller assigned to an empty executor nothing happens, I want to setup a cue, press store and then press the empty slot on my midi controller to save, is this possible?

[@lightinglizard7739]

like I assigned my apc mini to 3.416 3.417 3.418 etc and they're all blank cues i want to press store than button 1 on my physical controller and have it store on assigned executor (lets say 3.416) the page is created and i have cues on 3.301-3.310 already made

[@stefankrumm6709]

@@lightinglizard7739 Hi, I am afraid that is not possible (but I will give it a try).

[@connorelder5798]

my master only jumps from 0 to 100 how do i make it variable

[@stefankrumm6709]

If you send me your Chataigne file I could check what‘s wrong.

[@_pasi2996]

@@stefankrumm6709 Sadly i have the same issues. What could i do ?

[@stefankrumm6709]

@@_pasi2996 Hi, did you set a filter/remapping? See video at 3:35. If you don't have success, please mail me your Chataigne file, I will try to fix it. [e-mail]

[@_pasi2996]

@@stefankrumm6709 yes, i had the remapping in there.
I didn't saved the file so i just recreated it and now it works. i don't knew what i was doing wrong before. But Thanks :D